Pharmaceutical Equipment

Used Groen Inclined Agitated Kettle, 250 gallon, Model INA-250, 316 stainless steel, vertical. Approximately 54" middle diameter x 45" deep. Full jacket, upper jacket rated 40 PSI, lower jacket rated...

Used-Groen Inclined Agitated Kettle, 250 gallon, Model INA-250, 316 stainless steel, vertical. Approximately 54" middle diameter x 45" deep. Full jacket, upper jacket rated 40 PSI, lower jacket rated 100 PSI at 338°F. Mounted on 4 carbon steel legs. National Board #104598. Serial #104598.

MFR: Groen

Used 250 gallon Precision Stainless Inc 316L reactor body with 304L side jacket. Dished top and bottom. Vessel is 36" diameter x 58" SS. Vessel on four legs. The vessel is rated for up to 45 PSIG @ 3...

Used-250 gallon Precision Stainless Inc 316L reactor body with 304L side jacket. Dished top and bottom. Vessel is 36" diameter x 58" SS. Vessel on four legs. The vessel is rated for up to 45 PSIG @ 350 degrees F & 29.92" Hg Vacuum and the jacket is rated for up to 75 PSIG @ 350 degrees F. Mfg. National Board number 1907. Serial number 7869-4. Jacket nozzles two 2" threaded couplings and two 3/4" threaded coupling. Side nozzles are one 3" tri clamp and one 1-1/2" tri clamp with valve. Bottom has 2" Tank Mate for level monitoring, one 1-1/2" tri clamp, and one 1/2" coupling. Top nozzles are one 18" hinged manway with 3" blinded triclamp nozzle on the lid, one 2" tri clamp nozzle with modified flange attachment, one 2" blinded tri clamp and four - 1-1/2" tri clamp with three with blinds. 90" OAH.

MFR: Precision

Used Ingersol-Rand Centac Air Compressor Model CH5-18M1H, 250 HP Reliance Electric motor, 460, 3 phase. Serial #M89-5038 built in 1989. Unit is 1817 cfm, 14.0 PSIA, 30 PSIG, 3574 RPM, 95 degree F. Bo...

Used-Ingersol-Rand Centac Air Compressor Model CH5-18M1H, 250 HP Reliance Electric motor, 460, 3 phase. Serial #M89-5038 built in 1989. Unit is 1817 cfm, 14.0 PSIA, 30 PSIG, 3574 RPM, 95 degree F. Both nozzles are 8". Unit has hydraulic pump and control panel. One nozzle has 8" Badger Industries expansion joint. Overall dimensions are 60" wide x 74" tall x 90" long.

MFR: Ingersoll-Rand

Used Ingersol-Rand Centac Air Compressor Model CH5-18M1H, 250 HP Reliance Electric motor, 460, 3 phase. Serial #M89-5037 built in 1989. Unit is 1817 cfm, 14.0 PSIA, 30 PSIG, 3574 RPM, 95 degree F. Bo...

Used-Ingersol-Rand Centac Air Compressor Model CH5-18M1H, 250 HP Reliance Electric motor, 460, 3 phase. Serial #M89-5037 built in 1989. Unit is 1817 cfm, 14.0 PSIA, 30 PSIG, 3574 RPM, 95 degree F. Both nozzles are 8". Unit has hydraulic pump and control panel. Overall dimensions are 60" wide x 74" tall x 90" long.

MFR: Ingersoll-Rand

Used Walker Vertical Jacketed Mix Tank – 2,500 Gallon Stainless Steel

Used Walker 2,500 gallon vertical stainless steel jacketed mixing tank with top-entering 10 HP right-angle center-mounted turbine agitator. Agitation assembly features a stainless steel shaft with dual pitched-blade turbines for mixing and product circulation. Tank includes stainless steel sidewall baffles, thermowell for temperature monitoring, and 3" discharge outlet. Jacketed construction provides capability for temperature-controlled processing. Overall height is 15'. Previously used in a sanitary cosmetics manufacturing facility.

MFR: Walker

Used DCI 2,500 Pressure Wall Processor – 316L Stainless Steel Mix Tank

Used- DCI 2,500 Pressure Wall Processor, Gallon Dome Top, Cone Bottom, 316l Interior. Offset Vertical Agitator. Double Sprayball. 2" Outlet. 23 Sq. Ft. Jacketed On Lower Sidewall Only. Approximately 88" Diameter X 183" High. Top Manway. Stainless Steel Legs with Adjustable Feet.

MFR: DCI

Used Culligan Stainless Steel Media Tank, Approx. 2,500 gallon capacity

Used- Culligan Stainless Steel Media Tank, Approx. 2,500 gallon capacity. 95" diameter X 84" high straight side; Tank certified by Silvan Industries; Certified 125 PSI @ -20 to 250 degrees F. 0.437 head thickness, 0.375 shell thickness; Has 6" inlet and outlets; Has all stainless steel face pipe equipped with Bray Controls pneumatic valves; Has 3" side top relief valve and 4" blinded side bottom outlet; Equipped with stainless steel diffusers. Mounted on (4) legs. NB/SN 828846. Built 2017.

MFR: Culligan

Used ExceleTech 2500 Gallon 304 Stainless Steel Vertical Pressure Tank – 430 PSI @ 450°F, 6' Dia x 12' Straight Side, Insulated

Used- ExceleTech Inc. 304 Stainless Steel Vertical Pressure Tank, Approx. 2500 Gallons. 6' diameter X 12' straight side. Internal rated 430 PSI @ 450 F. Welded hemispherical heads. 1.250" shell thickness, bottom head 1", Top head 1.375". Top fittings: 18" manway, (1) 1", (1) 2", (1) 3", and (1) 6" agitator nozzle. 20" center bottom outlet. (12) 2" side injection ports. Mounted on (4) carbon steel legs. Insulated and wrapped with sheathing. NB# 121, S/N 6377-01. Built 2001.

MFR: Excel-A-Tec

Unused Lannon 25,000 Gallon Carbon Steel Horizontal Storage Tank – 11' Diameter x 35'3" Long

Unused Lannon horizontal storage tank with 25,000-gallon capacity, carbon steel construction, and overall dimensions of 11' diameter x 35'3" long. Manufactured in 2017, this tank features a top manway for interior access, side-mounted ladder, and saddle-mounted horizontal configuration.

Unused 25,000 Gallon Lannon Horizontal Carbon Steel Tank – Industrial Bulk Storage Vessel

Unused Lannon horizontal storage tank with 25,000-gallon capacity, carbon steel construction, and overall dimensions of 11' diameter x 35'3" long. Manufactured in 2017, this tank features a top manway for interior access, side-mounted ladder, and saddle-mounted horizontal configuration.

Used Airex PS-08 Dust Collector – 3,200 CFM | Platinum Series | 2520 Sq. Ft. Filtration | 2014 | With Silencer

Used-Airex PS-08 (Platinum Series) Cartridge Dust Collector System. For large shot peening machine. Capacity: 3200 CFM, with a filtration area of 2520sq.ft. Includes: optional silencer along with a few pieces of duct work. Year 2014.

MFR: Airex

Used Pfaudler 26 Sq Ft Tantalum Condenser – Alloy Tubes, CS Shell, 90 PSIG, Type 08-060-BEM-26

Pfaudler 26 Square Foot Tantalum Condenser, Type 08-060-BEM-26. 8"D x 60"L tubes. Tantalum 2-1/2% Tungsten Alloy Tubes rated 90PSIG/FV@350F. Carbon Steel Shell, 100PSIG/FV@200F. Serial #J064686. National Board #51543. Built 2005.

MFR: Pfaudler