Pharmaceutical Equipment

Used SV Dice model 127EL fully automatic case erector, side packer and top and bottom taper. Serial # 3623. This unit is designed to automatically open a knocked down corrugated paper case, close th...

Used-SV Dice model 127EL fully automatic case erector, side packer and top and bottom taper. Serial # 3623. This unit is designed to automatically open a knocked down corrugated paper case, close the back minor flaps, convey it to the load station, load the product, convey and close the front minor flaps, close all the major flaps, convey and apply tape to the flaps and discharge to conveyor. Capable of packing up to 12 cpm. It is equipped with CTC touch screen controls with an Allen-Bradley SLC 500 PLC. Unit currently set up to require 575 vac 3 ph 60 hz electrical and 80 psi 32 cfm air supplies. Built in 1997. Good condition. Manual on file.

MFR: S V Dice

Used S.G. Frantz Co. "FerroFilter" electromagnetic separator. Model number 73F2. Serial number E1512. It is designed to separate magnetic materials from heavy slurries at a maximum flow rate of 1,300...

Used-S.G. Frantz Co. "FerroFilter" electromagnetic separator. Model number 73F2. Serial number E1512. It is designed to separate magnetic materials from heavy slurries at a maximum flow rate of 1,300 to 4,000 gph. It has stainless steel contact parts and a swing back lid for cleanout. The cooling jacket is rated for 150 psi. This unit has a 3" threaded inlet and a 3" threaded outlet. 115 vdc 45 amps of power required. This unit sits on a carbon steel stand.

Used Safeline Mettler-Toledo XE Metal Detector & Checkweigher – 500 PPM - Combo Metal Detector / Checkweigher

Used- Safeline Mettler-Toledo Hi-Speed Model XE Combination Metal Detector and Checkweigher. Capable of speeds up to 500 packages per minute. Capable of weighing product up to 7kg. Approximate 7-3/4" W x 13" L checkweigher load cell belt. Pneumatic arm reject. Metal detector aperture opening 10" wide x 4-3/4" tall. Infeed conveyor 56-1/2" long x 8-3/4" wide, outfeed conveyor 16-1/2" long x 8-3/4" wide. Last running 4-3/4" x 6" x 1" pouch food product. 1/60/110 Volt.

MFR: Mettler-Toledo

Used Safeline Mettler Toledo PowerPhase Plus Metal Detector – 31.5" x 3" Aperture

Used- Safeline Mettler Toledo PowerPhase Plus Metal Detector. Aperature approximate 31-1/2" wide x 3" tall. Conveyor belt 30" wide x 96" long. Frame mounted. 3/60/208/230 Volt.

MFR: Safeline

Unused Safeline Advantage Profile LS Metal Detector with Conveyor System

Unused - Safeline Advantage Profile LS Metal Detector; Includes: Pack B Vectors/Histograms Mounting & Module Orientation: Base Mount - Module on side Case Construction & Finish: SS304 Beadblast Aperture Width: 200mm (7.87" Height 125mm (4.92"). Operating Frequency: Multi Simultaneous Frequencies Liner and IP Rating: Medium Duty (IP65)Fieldbus Interface Module: Ether Net/IP 1 Port-IP66 Rated PVR: No Conveyor System Conveyor System: PIUS SL2000 Conveyor IP Rating: IP65Construction Material: 304 Stainless Steel Hygiene Rating: Standard Tubular Construction Product Weight: 15kgBelt Type: White Modular Intralox Quick Release Belt: No System Orientation: Level/Flat Belt Height: 800mmMounting: Leveling Pads +/- 50mmReject Type: Light Duty Air Blast =0.5kgRejected Product Handling: All SS Manually Locking Bin Default Bin Capacity: N/A Required Bin Capacity: Default Reject Collection Location: Front (HMI Side) System Length: Custom 1801-2500mm System Length: 2438 System Angle: N/A - Flat Conveyor Belt Width: 150mm

MFR: Safeline

Unused Safeline Advantage Profile LS Stainless Steel Metal Detector with 200x125mm Aperture

Unused Safeline Advantage Profile LS Metal Detector. Aperture: 200mm wide x 125 mm Height. Includes: Pack B Vectors/ Histograms. Mounting & Module Orientation: Base Mount - Module on side Case Construction & Finish: SS304 Bead blast. Operating Frequency: Multi Simultaneous Frequencies Liner and IP Rating: Medium Duty (IP65)Fieldbus Interface Module: EtherNet/IP 1 Port-IP66 RatedPVR: No Conveyor System Conveyor System: PIUS SL2000 Conveyor IP Rating: IP65Construction Material: 304 Stainless Steel. Hygiene Rating: Standard Tubular Construction. Product Weight: 15kg Belt Type: White Modular Intralox Quick Release Belt: No System Orientation: Level/FlatBelt Height: 800mm Mounting: Leveling Pads +/- 50mmReject Type: Light Duty Air Blast =0.5kg. Rejected Product Handling: All SS Manually Locking Bin. Default Bin Capacity: N/A Required Bin Capacity: Default Reject Collection Location: Front (HMI Side)System Length: Custom 1801-2500mm. System Length: 2438. System Angle: N/A - Flat Conveyor Belt Width: 150mm.

MFR: Safeline

Unused Safeline Advantage Profile LS Metal Detector – 200x125mm Aperture

Unused Safeline Metal Detector, Advantage Profile LS. Includes: Pack B Vectors/Histograms. Mounting & Module Orientation: Base Mount - Module on side. Case Construction & Finish: SS304 Bead blast. Aperture Width (mm): 200mm x Aperture Height (mm): 125mm. Operating Frequency: Multi Simultaneous Frequencies Liner and IP Rating: Medium Duty (IP65) Fieldbus Interface Module: EtherNet/IP 1 Port-IP66 Rated. PVR: No Conveyor System. Conveyor System: PIUS SL2000 Conveyor. IP Rating: IP65. Construction Material: 304 Stainless Steel. Hygiene Rating: Standard Tubular Construction. Product Weight: 15kg. Belt Type: White Modular Intralox Quick Release Belt: No System. Orientation: Level/Flat Belt Height: 800mmMounting: Leveling Pads +/- 50mmReject Type: Light Duty Air Blast =0.5kg. Rejected Product Handling: All SS Manually Locking Bin. Default Bin Capacity: N/A. Required Bin Capacity: Default Reject Collection Location: Front (HMI Side)System Length: Custom 1801-2500mm. System Length: 2438. System Angle: N/A - Flat Conveyor Belt Width: 150mm

MFR: Safeline

Used Mettler Toledo Safeline SL2000 Conveyor Metal Detector – 8" x 3" Aperture

Used- Mettler Toledo Safeline Conveyor Mounted Metal Detector, Model SL2000. Aperture approximate 8" x 3" tall. Conveyor 4" wide x 51" long. Retracting belt reject system. Mounted on frame with casters. Serial# 27284-01. 3/60/208 Volt, 13 amp.

MFR: Safeline

Used - SARG Incline Belt Conveyor with Hopper & Cleated Belt

Used- SARG Incline Belt Conveyor. Stainless steel construction. Hopper. Cleated belt, approximate 8" wide x 5-1/2" center x 1-1/2" tall. Driven by 0.22kW, 3/60/277/480 Volt, 1620 rpm motor. Approximate 52-1/2" discharge height. Mounted on casters.

MFR: SARG

Scandia HLH Hot Melt Glue Cartoner – 100 Cartons/Minute, Industrial Packaging

Used- Scandia Automatic Horizontal-Load Hot Melt Glue Cartoner, Model HLH. Cartoner is currently configures for carton sized of: 1.5" x 1.5" x 6" - can be adjusted with proper change parts. Has 2-carrier chains at 5-1/4". Machine is set on 12" centers with a production rate of 100 cartons per minute. Mounted on Scandia "Tilt" frame. 3/60/230 Volts.

MFR: Scandia

Pre-Owned Scandia HLG Viking Horizontal-Load Cartoner – Adjustable Carton Sizes

Used- Scandia Semi-Automatic Horizontal-Load Hot Melt Glue Cartoner, Model HLG VIKING. Cartoner is rated from 20 to 50 cartons per minute (depending on materials, application and machine configuration). Has a carton size range of: 1" to 9" in Length, 3/4" to 3" in Width and 3" to 9-1/2" in Depth. Equipped with layflat carton magazine, reciprocating pick-n-place feeder, and a two-chain carrier set on 12" centers with 2" by 1" high lugs. Has 60" long gravity assisted (30 degree angle) product load area. Includes Nordson hot melt glue system. 3/60/280V.

MFR: Scandia

Used Scandia Model 420 Horizontal Cartoner – Manual Load, Reverse Tuck, 100 CPM

Used Scandia Model 420 Horizontal Cartoner. Capable of speeds up to 100 cartons per minute. Has a carton size range: 1"- 7" (length) x 5/8" - 3-1/2" (width) x 1-5/8" - 12" depth. Approx 6' manual loading station. Last ran reverse tuck cartons. Built 2015. Elec: 3/60/208V

MFR: Scandia