Pharmaceutical Equipment

Clear
https://images.aaronequipment.com/ItemImages/Lab-Equipment/Lab-Equipment/Ametek-142-201_53167001_aa.jpg

Stock No.:

53167001

Used Taylor Hobson 142-201 Ultra Autocollimator – 2-Axis | 0.001 Sec Read | SM2003 Software | Tripod & Reflector

Used- Taylor Hobson (Ametek) 2-Axis Photo Electric 142-201 Ultra Autocollimator. 0.2 sec (over central 800 sec) accuracy; 1800 sec range of measurement; 0.001 sec direct reading to. This two axis autocollimator is designed with a nominal range of 1800 seconds of arc, reading to 0.001sec., incorporating a solid state infrared LED light source and digital camera detector, and for the accurate measurement of small angular displacements. This autocollimator is used to measure: Angle (indexing head accuracy); Straightness (machine tool slides in two axes); Squareness (column to slideways); Parallelism (slideways). Includes SM2003 REV 2.9 Software; 50mm mounted flat reflector; adjustable tripod stand and plate for top of tripod.

MFR: Ametek

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Fillers-Powder-Auger-Semi-Automatic-Filler/AMS-A100_73641004_aa.jpg

Stock No.:

73641004

Used AMS A100 Semi-Automatic Auger Filler Stainless Steel Powder Filling Machine

Used AMS Model A100 Semi-Automatic Single Head Auger Filler. Capable of speeds up to 120 containers per minute (depending on application). Fill range: 100mg - 50lbs with change parts. All 304 stainless steel contact parts. Control panel has A/B controller with readout and start, e-stop and run / reset controls. Mounted on painted stand alone base with foot pedal control. Tooling required per application. Serial # A-100600. Voltage Motor: 330V / 3-Phase / 60H. Voltage Controls: 110V / 1-Phase / 60Hz. Built 1996. Approximate OAD 50" 88" 89" 585#.

MFR: AMS

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Complete-Packaging-Line-Liquid-Paste/Amsler_72808001_aa.jpg

Stock No.:

72808001

Amsler Triblock Rinser/Filler/Capper Bottle Filling Line for Bottled Water & Soft Drinks

Used-Amsler Equipment Bottle Filling Line: Consists of Amsler Triblock Rinser/Filler Capper for Bottled Water or other Soft Drinks. Includes inline bottle drying system, Pack Leader inline labeler, Video Jet Date Coder, multipack shrink bundler and automatic stretch wrapper. Includes upstream systems 2) Inline UV Water cleaning system 3) Inline Oxygen and Nitrogen Generator 4) Inline Ozone Generator. 5) Inline Reverse Osmosis System. 6) 5 Holding Tanks Each has capacity of 4,500 Litres - Total 22,500 Litres 7) Inline Live Water analysis system that tracks pH, TDS, and a number of other metrics.

MFR: Amsler

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Can-Seamers-Rotary/Angelus-29P-MSLF_72627008_aa.jpg

Stock No.:

72627008

Used Angelus 29P Rotary Double Can Seamer – Up to 200 CPM

Used- Angelus 29P Rotary Double Can Seamer, Model 29P MSLF. Capable of up to 200 cans per minute. Currently set on 301 dia. Can diameter size range: 2-1/8" to 4-1/4". Can height size range: 1-1/2" to 5-1/2". Wormscrew infeed, approximately 27-1/2" long. Approximate 3-1/4" wide conveyor. Serial# 3117741. 3/60/230 Volt.

MFR: Angelus

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Coders-Printers-Thermal-Hot-Stamp/Apex-C-500_73622001_aa.jpg

Stock No.:

73622001

Used Apex C-500 Automatic Rotary Plastic Tube Labeler & Printer – Up to 150 Tubes/Minute with UV Curing

Used- Apex Model C-500 Automatic Rotary Plastic Tube Labeler and Printer. Capable of speeds up to 150 tubes per minute (depending on application). Tube size range: .175" - 6" or 4.45mm - 152.4mm (Diameter) x .25" - 6.00" or 6.35mm - 152.4mm (Length). Max Copy length: 3.00" or 76.2mm. Has Hoppman Bowl feeder and Fusion UV Model I6B S/N 20212. Last used in dental products.

MFR: Apex

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Shrink-Equipment-Bundlers-Stretch-Banders/APM-MSA-26SS_73311001_aa.jpg

Stock No.:

73311001

Used APM MSA-26SS Semi-Automatic Shrink Bundler with Heat Tunnel

Used- APM Semi-Automatic Shrink Bundler, Model MSA-26SS. Set up for a 90-degree product infeed; 27.5" wide intermittent motion cross seal bar, with 6" long x 14" wide product hold down; 96" long x 24" wide x 37" tall stainless steel wire belt for heat tunnel; 48" long, aperture 28" wide x 13.5" tall stainless steel heat tunnel; Allen Bradley PanelView Plus 1250 touchscreen control; Ambient cooling fan after heat tunnel; Film rolls stand for top and bottom; 30" wide film feed rollers; Digital heat controls for tunnel and seal bar; Manual controls include cycle start, cycle stop, manual close, and e-stops; Light tree function indicator. Heavy duty SS tubular frame, on legs; 3/60/240V.

MFR: APM

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Shrink-Equipment-Bundlers-Stretch-Banders/APM-MIC-26_73726001_aa.jpeg

Stock No.:

73726001

Used APM MIC-26 Automatic Inline Shrink Bundler with Shrink Tunnel – Up to 30 Bundles Per Minute

Used- American Packaging Machinery (APM) Model MIC-26 Inline Shrink Bundler With Shrink Tunnel. Capable of production speeds up to 30 bundles per minute. Unit features a straight product infeed and approximately 1/2" wide x 27" long seal bar with knife cutoff. Shrink tunnel has an approximate 20" wide x 17" tall opening with wire belt conveyor. Equipped with control panel featuring Allen-Bradley L32E PLC, Allen-Bradley PanelView Plus 700 HMI, and (2) Allen-Bradley PowerFlex 4 drives. Electrical requirements are 480 volt, 3 phase, 60 Hz, 46.25 amps. Designed for automatic inline shrink bundling, the MIC-26 combines film sealing and heat shrinking into a continuous packaging operation. Serial # 652. Possible applications include shrink bundling and multipacking bottles, cans, containers, trays, food products, beverages, water, juice, dairy products, condiments, oils, and other packaged consumer or industrial products.

MFR: APM

https://images.aaronequipment.com/ItemImages/Mixers/Likwifier/APV-Crepaco_11585128_aa.jpg

Stock No.:

11585128

Used APV Crepaco 500-Gallon Stainless Steel Liquifier – Dual Agitation with 75 PSI Jacket

Used- APV Crepaco Stainless Steel Liquifier, Approximately 500 Gallon. Vessel has an atmospheric internal design with jacket rated 75 psi at 350 degrees F. Equipped with a 7.5 HP top mounted drive for sweep agitation, and a 25 HP bottom entering high speed agitator. Dish top, cone bottom. Approximate dimensions 60'' diameter x 36'' straight side, with an 18'' conical bottom. National Board # 9015, serial # K1050, built 1995.

MFR: APV/Crepaco

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Cappers-Aluminum-ROPP/AROL-EURO-VPA_73183004_aa.jpg

Stock No.:

73183004

Used Arol EURO VPA 3-Head Rotary ROPP Capper with Elevator (30mm, 2019)

Used- Arol Model EURO VPA, 3 Head Rotary ROPP Capper, Set on 30mm. Left to right operation. Includes elevator. Built 2019

MFR: AROL

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Shrink-Equipment-Bundlers-Stretch-Banders/Arpac-107-20_70226007_aa.jpg

Stock No.:

70226007

Used Arpac Automatic Tray Bundler – Model 107-20 for Juice Box Packaging

Used- Arpac Model 107-20 Automatic Bundler. Operates by taking a single lane of product and forming it into multipacks. Last ran juice boxes 6 pk 13.5" long x 6.5" high x 9.75" wide (individual box 3.25" W x 6.75" L x 6.5" H). Allen Bradley 5/03 PLC. Elec: 3/60/460V 40amps. Rated 38 Cycles per minute. Built 2007.

MFR: Arpac

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Shrink-Equipment-Bundlers-Stretch-Banders/Arpac-BPMP-5152_73493001_aa.jpg

Stock No.:

73493001

Used Arpac Model BPMP-5152 Registered Film Shrink Bundler | Print/Registered Film | Tray Pack | Allen Bradley Controls

Used Arpac Model BPMP-5152 Registered Film Shrink Bundler | Print/Registered Film | Tray Pack | Allen Bradley Controls. Max Film width: 26" x 12" Max bundle height. Set up for trayed products. Can run clear or print registered film. Allen Bradley PLC controls. 3/60/460V. OAD: 26'L x 68"W x 6'H.

MFR: Arpac

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Conveyors-Table-Top-Chain-Conveyors/Arrowhead_70907005_a.jpg

Stock No.:

70907005

Pre-Owned Arrowhead S-Curve Conveyor – 3” Wide Plastic Belt

Used- Arrowhead S" Curve Table Top Chain Conveyor. Approximately 3" wide plastic belt. Approximately 21" long infeed into a 90 degree turn into a 9" long section into a 90 degree turn into a 21" long discharge end. Currently 45" from belt to floor. Mounted on adjustable carbon steel legs with casters. Carbon steel frame, belt side rails. Driven by a 1/2 hp, 90 volt, 1750 DC gear motor with a Penta DC motor speed controller.

MFR: Arrowhead

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.