Food and Beverage Equipment

National Refrigeration Air-Cooled Rotary Screw Chiller for Industrial Refrigeration and Process Cooling Applications

National Refrigeration Air-Cooled Rotary Screw Chiller for Industrial Refrigeration and Process Cooling Applications. Model DCM070-t4A-A2v3-X085 Unit has (6) fans and rotary screw type compressor. Suitable for used with the following refrigerants R22, R404A, R407C and R507. Unit housed in galvanized structure.

Industrial Piping Dual-Tower Regenerative Gas Drying System with Stainless Steel NB-Stamped Dryer Vessels

Industrial Piping Dual-Tower Regenerative Gas Drying System with Stainless Steel NB-Stamped Dryer Vessels. Unit consists of (2) Regenerative dryers built by Industrial Piping Inc. Dryers are 304 stainless steel construction and approximately 500 gallons each. Rated for 100 PSI @ 450 F. NB Stamped. Mounted on skid and includes valves and piping. Units are insulated and covered with aluminum sheathing. Built 2011.

MFR: Industrial Piping

Smithco Air-Cooled Fin-Fan Heat Exchanger for Industrial Gas, Fluid, and Process Cooling Applications

Smithco Air-Cooled Fin-Fan Heat Exchanger for Industrial Gas, Fluid, and Process Cooling Applications. Overall dimensions are 12.5' long X 8.0' wide X 7.0' tall. Unit has (162) 1" 304 stainless steel tubes configured in 4 rows 2-Pass, 11' long. Fin Type L-tension aluminum. Rated 50 PSIG @ -20 to 350F. 10' 300# inlet and outlet. Unit has (1) 10HP COFIMCO model 2134-4-24L/B3T fan 7' diameter consisting of (4) aluminum blades with adjustable pitch and 10 degree angle. Motor is 3/60/460 volt. Fan driven by belt driven speed reducer. Rated 62,000 ACFM. Painted carbon steel structure. Built 2010, Weight 6,000#.

MFR: Smithco Engineering

Used APV Spray Dryer 3PSBD 58 – 316 Stainless Steel, 35-120 kg/h Capacity

Used- APV Spray Dryer, Model 3PSBD 58, 316 Stainless Steel. Installed unit including heating elements, filter, controls. Drying chamber size 58, approximate volume 21.73 m3. Production rate: Due to test more kinds of nozzles and different conditions, we oscillated in powder production rate form 35 to 120kg/h. Inlet temperature main drying air: 0-600 degrees C ( We often used max. inlet temp. 420 C). Maximum outlet temperature 140 degrees C. Includes Herding dust collector, cyclone and blower. Dimension 4200 x 2250 x 2300mm (LxWxH). Gross weight: 1880kg, Net weight: 1580kg. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: APV

Alfa Laval CONTHERM 6X3 Scraped Surface Heat Exchanger.

Used- Alfa Laval CONTHERM 6X3 Scraped Surface Heat Exchanger. Stainless steel. 3 Ft2 (0.28 m3) heating surface area. Design pressure 450 PSI (30 bar), Working pressure 225 PSI (15 bar) at 375 deg F (190 deg C). Complete with control panel and additional infrastructure. Previously used in a dairy application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

COMAT M22TR Mozzarella Cheese Molding Machine – 2500 kg/hr, Pre-Hardening Heads Included

Used- COMAT Mozzarella Molding Machine, Model M22TR. Rated 4400-5500 lbs/hr (2000-2500 kg/hr). Includes (2) 8oz and (2) 16oz molding; Components included: pre-hardening heads; water chilling unit; CIP System. OAD: Approximate 6' H x 10' W (not including CIP/water chiller). 3/50/220V.

Alfa Laval UVNX-945B-11G Solid Bowl Tricanter Centrifuge. used.

Used- Alfa Laval UVNX-945B-11G Solid Bowl Tricanter Centrifuge. 316 Stainless steel construction (product contact areas). Maximum bowl speed 2900 rpm. Single row of lined cake discharge ports, single lead conveyor, base, casing, gearbox, feed pipe.45 kw, 400-690/3/50-60 main drive motor & gearbox. Back drive system. Mounted on a stand with 4 legs. Control panel. Previous used in an olive oil application .Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Used – Clark Centrifugal Compressor Model C/T 20341, Size 2M – 5089 CFM, 9 Impellers, w/ GE 1750 HP Motor

Used- Clark Centrifugal Compressor, Model C/T 20341, Size 2M. 9 Impellers. Carbon Steel. 5089CFM inlet capacity, 9100 rpm maximum continuous speed. 315 degrees F maximum operating temperature, 225psi inlet pressure and 270psi discharge pressure. 8", 12" Top Openings. Western Gear Box 1-5.1111:1 Ratio. Repaired by Dresser-Rand in 2006. Serial# 2-9-2610. Includes GE Custom 8000 Induction Motor Rated 1750hp 3/60/4000v 1786rpm, with enclosure.

MFR: Clark

Used – Steel Fab Horizontal Carbon Steel Pressure Tank – 40" x 96", 150 PSI, 2008

Used Steel Fab Horizontal Carbon Steel Pressure Tank 40" x 96", 150 PSI, 2008. Approximately 40" diameter x 96" straight side. Dished heads. Rated 150psi at -20 to 400 Degrees F. 16" diameter manway with cover, (2) 2" top connections. Head thickness .211, shell thickness .250. Part# 134-474SE. National Board# 520261, Serial# CRN.H9097.5C.

Used – Xchanger Inc. AA-1750 Air Cooled Heat Exchanger Skid – 24" Fan, 30 HP Motor

Used Xchanger Inc. AA-1750 Air Cooled Heat Exchanger Skid 24" Fan, 30 HP Motor. Aluminum Plate-Fins. Serial# 1207-B10733. 24" diameter fan, 4" Inlets/Outlets. Includes Universal Silencer, Model URBY 4, driven by a 30hp 3/60/230/460v 1750rpm motor. Birkett WB400 Safety Relief Valves. Mounted on Carbon Steel Frame.

MFR: XChanger

Used – Xchanger Inc. AA-2750 Air Cooled Heat Exchanger Skid – Dual Units, 24" Fan, 400 HP Motor

Used Xchanger Inc. AA-2750 Air Cooled Heat Exchanger Skid Dual Units, 24" Fan, 400 HP Motor. Aluminum Plate-Fins. 24" diameter fan, 8", 2" Inlets/Outlets. Includes Silencer rated 1.75 BAR, driven by an Approximate 400hp 3/60/460v 3575rpm motor. Birkett 4P6H411422/DS Safety Relief Valves. Mounted on Carbon Steel Frame. Includes Control Panel Skid on Carbon Steel Frame.

MFR: XChanger

Used – 304 Stainless Steel Samson Metered Pump Skid – 4 Segments, Pressure Panels, Multi-Connection

Used 304 Stainless Steel Samson Metered Pump Skid 4 Segments, Pressure Panels, Multi-Connection. Consisting of (4) metered segments. 6", 4", 2" diameter connections. 6" & 4" diameter outlets. Mounted pressure readout Panels. Approximate OAD 128" long x 86" wide x 103"T.