Food and Beverage Equipment

Used Complete Stainless Steel Drying System with Dual 13' x 60' AEROGLIDE Triple-Pass Rotary Drum Dryers

Used- Complete Stainless Steel Drying System. Based on dual 13' X 60' AEROGLIDE triple-pass rotary drum dryers with trunnion and drives with motors. Including 70 million btu natural gas burners, max thermal output of 42.200.000 kj/h. Discharge cyclone, multi-clones, fans with motors, stack, all relating ducting and steel structure. These dryers are fired with natural gas or propane. Main cyclone at discharge of dryer has 3.66m diameter, secondary multicyclones (8/dryer) are 1.07m diameter each, stack is 37m above grade, Volumetric airflow rated 30.68 cubic meter/second.

Used Brock SQ16 Grain Dryer – 326 Bushel Capacity | 15 HP Fan | Auger & Chain Unload | 27'2" Length

Used- Brock Grain Systems Grain Dryer, Model SQ16, 326 bushel capacity. 15 HP fan, 3HP auger load, 2HP Chain unload. 16'4" column length. 27'2" overall length. 14'2 overall height. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used USA Lab UC-20/20 Refrigerated Circulator Chiller – 20L, -20°C

Used- USA Lab Refrigerated Circulator / Chiller, UC-20/20. 20L Reservoir. Refrigerating 3,000 - 10,500 BTU's. Circulating pump 100 W. Temperature range room temperature to -20 C / 4 F. Reservoir dimensions 11.8" x 11.8". Pump flow 30L/min. R404 Refrigerant.

Lot of (2) Used USA Lab 100LB Jacketed Tanks – 304 Stainless Steel, 60L Capacity

Lot of (2) Used- USA Lab 100LB Jacketed Tank, 304 Stainless Steel, Vertical. Approximate capacity 60 Liter. Approximate jacket capacity 18 liter. Mounted on (4) legs with casters.

Used USA Lab UC-20/40 Refrigerating Chiller – 20L, -40°C, 12,400 BTU

Used- USA Lab Refrigerating Chiller, Model UC-20/40. Pump flow rate 30L Per minute. 20L Reservoir. Refrigerating BTU 3,300 to 12,400. Temperature range: Room temperature to -40 C / -40 F.

Used USA Lab HC-5/10 Circulating Chiller & Heater – 5L, 30L/min Flow

Used- USA Lab Model HC-5/10 Circulating Chiller & Heater. Pump flow rate 30L/min. 5L Reservoir capacity. Refrigerating BTU's 4,500 to 1,000. Heating Power 1000 W. Batch# 20050258. 1/60/110 Volt, 20 Amp. Built 2020.

Used Maja FP100 Meat Slicer – 19 kW Stainless Steel | 130 Slices/Min | 600 mm Max Cut

Used- Maja Meat Slicer, Model FP100. Stainless steel. Cuts 40-130 slices per minute. The maximum cutting thickness is 23.4" (600 mm). Driven by a 19 KW-400Volt/50Cycle/3PH Motor. Overall dimensions 67" (2060 mm) long x 45" (1380 mm) width x 61" (1850 mm) high. Weight 1.5 tonnes. Serial # 45585. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Krauss Maffei Conical Dryer Model TMD 0.25/160 – Stainless Steel 316Ti, ATEX

Used Krauss Maffei Conical Dryer, Model TMD 0.25/160 "Titus-Mixer-Dryer," constructed from stainless steel 1.4571 (316Ti). This unit features a working pressure of 3 Bar (43.5 PSI) (vacuum possible), jacket working pressure of 6 Bar (87 PSI), and a capacity of 380 Liters (useful capacity 250 Liters). The cone measures 1016mm (40") in diameter and 1066mm (42") in height, with a dished top and a jacketed mixing screw (6 Liters). Powered by a 4.0 kW + 1.5 kW motor, 380 Volt (explosion-proof), and a jacket volume of 96 Liters. It operates at a maximum temperature of 165C and has a 150mm (6") bottom outlet. Manufactured in 1995, the dryer is mounted on a frame, includes switchgear, and is ATEX compatible. Dimensions are 2.0m x 2.0m (6.6' x 6.6') with a total height of 3.5m (11.5'), weighing 2650 KG. Serial Number 7005/742904/3.

MFR: Krauss Maffei

Used Insta-Pro Model 2000 Continuous Expeller Press – Oil Extraction

Used Insta-Pro Model 2000 Continuous Expeller Press-Used. 7.2:1 cage-length-to-cage-diameter ratio, equipped with a vertical screw feed. Equipped with a 30 HP main drive and 3 HP feed drive. Designed for mechanical oil extraction from oil seeds such as soybeans, canola, and sunflower seeds. This unit includes a belt-driven drive.

MFR: Insta-Pro

Used Insta-Pro Model 2000 RC Continuous Extruder – 125 HP Motor, High-Capacity Processing

Used- Insta-Pro Model 2000 RC Continuous Extruder. Rated capacity approximate 1,300 - 3,840 pounds per hour. Includes extruder barrel and main worm shaft assembly. Driven by 125 HP motor.

MFR: Insta-Pro

Shenzhou Desludger Disc Centrifuge, Model DHC730

Unused- Shenzhou Desludger Disc Centrifuge, Model DHC730. Stainless steel construction (product contact areas); Maximum bowl speed 4500 rpm; separator design; 7712 separation factor; 25~35 m3/h capacity (according to different materials); 55 kW (73.75hp) drive motor; control cabinet; PLC. Currently disassembled.

Unused Electromagnetic Roaster – Model TD-G650 | 650L Capacity | 0–400°C | 1 RPM | 3/50/380V | Zhengzhou Tonde

Unused- Electromagnetic Roaster, Model TD-G650. 650 liter Capacity Range. 1rpm/minute rotation range. 0-400 Degrees C temperature range. 3/50/380 volt requirements. Made by Zhengzhou Tonde