Food and Beverage Equipment

Used Stainless Steel Sanitary Vibratory Scale Feeder – 132” x 24” Dimple Pan | Rotary Scale Feed | Poultry

Used-Stainless Steel Sanitary Vibratory Scale Feeder; Dimple pan measures 132 inches long X 24 inches wide X 10 inches deep; Infeed height 36 inches; Discharge height 32 inches; Overall dimensions are 132 inches long X 34 inches wide X 43 inches high; Last used to feed a rotary scale doing chicken breasts.

Used Waukesha Cherry-Burrell Thermutator – Model 624DE | 400 PSI | 400°F | Sanitary Heat Exchanger | Dairy Grade

Used- Waukesha Cherry Burrell Thermutator Model 624DE; Product 400 PSI, 400 deg F; Media 250 PSI, 400 deg F; complete with start/stop controls; Overall dimensions 72 inches wide X 72 inches long X 30 inches high; Last used in a dairy application.

MFR: Cherry Burrell

Unused Stancor S3000HH Submersible Dewatering Pump – 30HP, 4” NPT Discharge

Unused - Stancor High Head Submersible Dewatering Pump, Model S3000HH. ESA Approved. 575V / 30A / 30HP / 3 Phase. Maximum Volumetric Flow Rate: 500 US gpm, Maximum Head: 380 feet, Discharge: 4" NPT. Weight: 320 lbs - Dimensions (Diameter x Height): 16-1/8" x 39-1/8".418. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Unused Stancor S3000HH High Head Submersible Dewatering Pump – 30HP, 500 GPM

Unused - Stancor Model S3000HH High Head Submersible Dewatering Pump. ESA Approved. 575V / 30A / 30HP / 3 Phase. Maximum Volumetric Flow Rate: 500 US gpm, Maximum Head: 380 feet, Discharge: 4" NPT. Weight: 320 lbs - Dimensions (Diameter x Height): 16-1/8" x 39-1/8".418. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Buy Used Cherry Burrell Tank – Industrial Storage & Processing

Used- Cherry Burrell Tank, Stainless Steel, Vertical. Flat open top. Provision for side entering clamp on agitator, no agitator. Bottom outlet. Mounted on (4) legs. Serial# E-227-92.

MFR: Cherry Burrell

Used Bertoli Giotto PX32011 High Pressure Pump – Stainless Steel | 3/60/460V | Baby Food Grade Application

Used- Bertoli Giotto Series Model PX32011 Stainless Steel High Pressure Pump. Last used in baby food nutritional operation. 3/60/460V

Used Storage Bin, 304 Stainless Steel, 600 gallons

Used- Storage Bin, 304 Stainless Steel, Approximately 600 gallons, Vertical. Approximately 47" diameter x 76" straight side, 32" long cone. Dish Top, Coned Bottom. Openings top: 16" manway with (2) 1-1/2", 1" threaded openings on flange, (2) 4" with sight glass, 2-1/2" side top opening. 16" Diameter center bottom outlet. Side lug mounted.

US Centrifuge; Model A262. Used.

Used- US Centrifuge, Model A262; Capable of running up to 40 gallons/minute; Bowl volume 4 Gallons; Maximum Bowl speed 2500 RPM; Bowl diameter 18"; Max "G" Force @ OD 1600 x one gravity; Maximum Operating temperature 160 degrees F; Maximum Particle size 1/4"; Feed Pressure 5 PSI @ 40 gpm; Stainless Steel bowl; unit housed in a 8'x10' container; 50" Long x 34.25" Wide x 50" High (without stand, approximately 90" with stand); Approximately 3,000 lbs (5,000 with container); Last used for manure separation pilot project.

MFR: US Centrifuge

Used Anhydro Spray Dryer, Type 111 AK Series | 66–132 lbs/hr | 304 Stainless Steel | Cyclone, Slurry Tank, Pump & Controls | Ceramic Application | Built 1995

Used- Anhydro Spray Dryer, type 111 AK Series. Capacity 66-132 lbs/hr. (30-60 kgs/hr.) end product. 304 stainless steel on product contact parts, fluid atomizer type nozzle. Incl. (1) Cyclone, (1) 115-liter (30-Gallon) slurry tank with agitator, (1) Seepex Model 006- 12 Progressive cavity pump, (1) Electric burner, (1) Control Panel. Complete with mezzanine and additional infrastructure. Previously used in a ceramic application. New 1995. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Anhydro

Wolfking B400-HD Meat Grinder – 200 HP, 16” Screw, 14” Die Plate

Used- Wolfking Meat Grinder, Model B400-HD, 304 Stainless Steel. Trough 47" wide x 50" long x 18" deep. Carbon Steel Crushing screw approximately 16" diameter x 52" long. Driven by an approximate 200 HP (149kW) 3/60/460 volt, 1785 rpm motor. 14" Diameter die plate with 3/8" diameter holes. Mounted on frame with casters.. Serial# 62226.

MFR: Wolfking

Used Evoqua/Siemens 1500mm Filter Press – Heavy-Duty Industrial Filtration

Used- Evoqua/Siemens Model 1500N32-64/90-125/175SYLC Automatic Filter Press. Features (65) 1500 mm x 1500 mm (approximately 60" x 60") sidebar suspended filter plates with automatic plate mover/plate shifter for reduced manual handling. Equipped with Siemens PLC-based controls and CNC-style automation for automated cycle control. Heavy-duty construction with an approximate structural weight of 52,000 lbs. Manufactured in 2008. Suitable for municipal and industrial sludge dewatering, mining and mineral slurry dewatering, chemical and specialty chemical filtration, food and beverage process and by-product filtration, and pulp and paper slurry and wastewater treatment. Designed for high-capacity solid/liquid separation in demanding industrial applications.

MFR: Siemens Allis

OG-375 oxygen concentrator

Used- OG-375 oxygen concentrator Industrial design uses steel zeolite towers and rebuildable solenoid valves for a easy to maintain system that will never wear out or become obsolete. Features Produces 375 SCFH oxygen at up to 45 PSI Industrial heavy-duty design and quality oxygen concentrator Energy efficient oxygen concentrators require less compressed air for operation High oxygen outlet pressure 45 PSI standard, up to 65 PSI outlet pressure available Completely rebuild-able and easy to maintain design will offer many years of operation More Information Weight 1.35 lbs (0.61 kg) Dimensions 30" x 36" x 84" (76.2 x 91.4 x 213.4 cm) LxWxH Warranty 1 Year Max Pressure 45 PSI (3.16 Bar) Higher pressure systems available Oxygen Connection 3/8-inch NPT Inlet/Outlet Connections 3/8-inch NPT Integrated Compressor No 68 CFM @ 90 PSI required Oxygen Flow Rate 176.98 LPM (375 SCFH) The OG-375 will require an air tank and an oxygen tank for proper operation.