Food and Beverage Equipment

Unused Tarmac Int. Inc. Heat Exchanger – 768 Sq. Ft., 1.8 MMBTU/H, Stainless Steel

Unused- Tarmac Int. Inc Heat Exchanger, (Never set up on the Hot side). Model 48-30DPL48-0.625-IU. 768 sqft. Stainless steel. Size: 48"*48"*54.25, CFM: 8100 CFM. Material: High temperature SST, Surface area: 768 Ft square. Total heat transfer rate: 1.8 MMBTU/Hour. Type: Plate/plate heat exchanger. Max Temp Hot Gas Inlet: 662 F. Efficient: 64.3%. Suitable to handle particulate gases from solid combustion and also applicable in clean combustion Outlet temp hot side: 249F , 11 GA. 304 S.S. casing with 18 GA. 304 S.S. expansion joints at 3 connections, 12 Ga. C.S. cladding with 3 x 3 x C S flanges primed and painted. STRUCTURAL STAND EQUAL TO OR LESS THAN 5 HEAT EXCHANGER ELEVATION. Year 2021. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Smithco Model 1F30-111-2 Four-Bundle Fin-Fan Cooler Package – Natural Gas & Lube Oil Air-Cooled Heat Exchanger System

Used Smithco Model 1F30-111-2 Four-Bundle Fin-Fan Cooler Package Natural Gas & Lube Oil Air-Cooled Heat Exchanger System. S/N 108432-B. Overall dimensions are 31.5' long X 11.1' wide X 12.67' tall. Unit consists of (2) lube oil coolers, Natural gas cooler #1 and Natural gas cooler #2. Lube cooler 1 has 3" 300# inlet and outlet and (98) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 330 PSIG @ -20 to 350 F. Bare Sq ft. 770.3, Extended Sq Ft. 16,310. Natural gas cooler CLR-1 has 6" 300# inlet and outlet and (34) 1.25" 304 tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 300 PSIG @ -20 to 350F. Bare Sq ft. 334, Extended Sq Ft. 6,542. Lube cooler 2 has 2" 300# inlet and outlet and (54) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 450 PSIG @ -20 to 350 F. Bare Sq. ft. 424.4 Extended Sq ft 8,986. Natural gas cooler CLR-2 has 4" 300# inlet and outlet and (26) 1.25" 304 stainless steel tubes configured in 4 rows 2 pass 30' long. Fin type L-tension aluminum. Rated -20 to 350 F. Bare Sq ft. 255.4, Extended Sq. ft. 5,003. Unit has (2) 20HP COFIMCO model 49 5000 fans 10' diameter consisting of (5) aluminum blades with adjustable pitch and 10 degree angle. Motors are 3/60/460 volt. Fans driven by belt driven speed reducer. Rated 122,800 ACFM. Galvanized structure. Built 2010, Weight 22,800#.

MFR: Smithco Engineering

Smithco Four-Bundle Air-Cooled Heat Exchanger Package for Natural Gas Compression and Lube Oil Cooling Operations

Smithco Four-Bundle Air-Cooled Heat Exchanger Package for Natural Gas Compression and Lube Oil Cooling Operations. S/N 108432-B. Overall dimensions are 31.5' long X 11.1' wide X 12.67' tall. Unit consists of (2) lube oil coolers, Natural gas cooler #1 and Natural gas cooler #2. Lube cooler 1 has 3" 300# inlet and outlet and (98) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 330 PSIG @ -20 to 350 F. Bare Sq ft. 770.3, Extended Sq Ft. 16,310. Natural gas cooler CLR-1 has 6" 300# inlet and outlet and (34) 1.25" 304 tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 300 PSIG @ -20 to 350F. Bare Sq ft. 334, Extended Sq Ft. 6,542. Lube cooler 2 has 2" 300# inlet and outlet and (54) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 450 PSIG @ -20 to 350 F. Bare Sq. ft. 424.4 Extended Sq ft 8,986. Natural gas cooler CLR-2 has 4" 300# inlet and outlet and (26) 1.25" 304 stainless steel tubes configured in 4 rows 2 pass 30' long. Fin type L-tension aluminum. Rated -20 to 350 F. Bare Sq ft. 255.4, Extended Sq. ft. 5,003. Unit has (2) 20HP COFIMCO model 49 5000 fans 10' diameter consisting of (5) aluminum blades with adjustable pitch and 10 degree angle. Motors are 3/60/460 volt. Fans driven by belt driven speed reducer. Rated 122,800 ACFM. Galvanized structure. Built 2010, Weight 22,800#.

MFR: Smithco Engineering

Used Xylem Shell & Tube Heat Exchanger – 150 PSI Pressure Rating, Built 2018

Used 2018 Xylem horizontal U-tube heat exchanger with approximately 78 square feet of heat transfer surface. Unit has (22) 304 stainless steel 3/4" diameter tubes and an approximately 8" diameter x 108" long carbon steel shell with sheathing. Shell and tubes are rated for 150 psi at -20 to 375 F. Connections include (2) 2" shell openings, (2) 2" tube openings, 3/4" vent, and (2) 1/2" drains. Serial number 285806-03, National Board number 314565. Overall dimensions are approximately 118" x 54" x 34" tall. Possible applications and suitable products include industrial heating, cooling, heat recovery, and liquid-to-liquid heat transfer service for compatible process fluids.

Used SPX Marley NC8409U Crossflow Cooling Tower – 790 Ton/Cell | 2018 Build | 4-Cell Industrial System

Used SPX Marley NC8409U crossflow cooling tower system featuring a 4-cell industrial configuration with an approximate combined cooling capacity of 790 tons. Each cell is rated for approximately 1,650 GPM, providing a total system flow of 6,600 GPM. Designed for cooling water from 109.0 F hot water temperature to 85.0 F cold water temperature with a 76.0 F entering wet bulb temperature. Each cell is equipped with a 12' diameter, 5-blade fan driven by a 50 HP motor operating at 1,800 RPM with 60 Hz, 230/460V electrical service. Built in 2018.

MFR: SPX

Used Rosenmund 8 Square Meter Nutsche Filter – 304 Stainless Steel, Liquid Discharge

Used- Rosenmund 8 Square Meter Nutsche Filter, 304 Stainless Steel. Liquid discharge. 304 stainless steel shell, jacket, and internal. Shell rated 50 psi/FV at 370 degrees F. Half pipe and bottom plate jacket rated 150 psi/FV at 370 degrees F. Base rated 150 psi/FV at 370 degrees F. 20 hp main drive; hydraulic pack. Built 1991.

MFR: Rosenmund

Used Buhler DFMF-2-P-RF Stainless Steel Plow Mixer with HMI Controls – 12.8 Cu. Ft. Capacity

Used- Buhler Model DFMF-2-P-RF Stainless Steel Plow Mixer. Designed for efficient blending and mixing applications. The unit has an approximate full capacity of 12.8 cubic feet and a working capacity of approximately 8.5 cubic feet. Constructed of stainless steel, the mixer is non-jacketed and features a hinged cover equipped with grid safety bars for operator protection. Mixer includes an infeed opening measuring 38" long by 5.5" wide and a discharge gate measuring 41" long by 5.25" wide. The discharge height is approximately 48", the infeed height is approximately 80". The unit is powered by a 3.6 kW (4.9 HP), 480-volt, 3-phase, 60 Hz motor, and is supplied with a control panel featuring an HMI for user-friendly operation and process monitoring. Serial # 10335419, Built 2003. The mixer occupies an approximate footprint of 5' by 10', making it suitable for a variety of production environments requiring reliable and consistent mixing performance.

MFR: Buhler Inc.

Used Budzar Water-Cooled Chiller Model 2WT-930-D/AC-8-SP – 8 Ton (2019)

Used- Budzar Chiller, Model 2WT-930-D/AC-8-SP. Water cooled. 8 Ton cooling capacity. 30 GPM at 32 PSIG Zone 1 design flow rate, 19 GPM at 41 PSIG chiller pump. 9 kW heating capacity. R-407C refrigerant. 4 to 124 degrees C (39-255 degrees F) design temperature range. 3/60/460V. Serial # 201801-32852. Built 2019.

MFR: Budzar

AVA-Holland Merten GmbH Rotary Vacuum Paddle Dryer, type HTK 200.

Used- AVA-Holland Merten GmbH Rotary Vacuum Paddle Dryer, Type HTK 200. 316TI (1.4571) on product contact parts. Total capacity 8.3 cu. ft (235 liter), Working capacity 156.66 cu. ft (156.66 liter). Double jacketed. Inside operating temperature 266F (130C), Design temperature 392F (200C). Internal rated for full vacuum and 45 PSI (-1/3 bar). Jacket pressure 90 PSI (6 bar). Heated shaft speed of 107 RPM driven via a gearbox by a 5.5 Kw EExdellCT4 motor. Mechanical seal. Maier heater for the shaft heating. Frame mounted. New year 2002. Serial number # 5499/2. Overall dimensions: 111" L x 36" W x 49" H (3400 mm L x 1100 mm W x 1500 mm H). Weight approx. 1.6 tonnes. Reported in good condition. Previously used in a pilot plant for solid phase modification of wood.

Used AVA-Holland Merten HTK 200 Rotary Vacuum Paddle Dryer – 316Ti Stainless Steel

Used- AVA-Holland Merten GmbH Type HTK 200 Rotary Vacuum Paddle Dryer. 316TI (1.4571) on product contact parts. Total capacity 8.3 cu. ft (235 liter), Working capacity 5.53 cu. ft (156.66 liter). Double jacketed. Inside operating temperature 266F (130C), Design temperature 392F (200C). Internal rated for full vacuum and 45 PSI (-1/3 bar). Jacket pressure 90 PSI (6 bar). Shaft speed 107 RPM driven via a gearbox by a 5.5 Kw (7.37hp) EExdellCT4 motor. Mechanical seal. Frame mounted. New year 2002. Serial # 5499/1. Overall dimensions: 111" L x 36" W x 49" H (3400 mm L x 1100 mm W x 1500 mm H). Weight approx. 1.6 tonnes. Reported in good condition. Previously used in a pilot plant for solid phase modification of wood. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Alloy Products 8.4 Gallon Jacketed Tank – 316L Stainless Steel Pressure Vessel

Used Alloy Products 8.4 Gallon / 31.8 Liters Product Can. 316L Stainless steel. Approximate 16" diameter x 7" straight side. Dished heads. Rated 125 psi at -20 to 300 degrees F. Sidewall & bottom head jacket. Mounted on casters. Serial# C221756-1-003. Built 2014.

MFR: Alloy Products

Alloy Products 31.8 Liter Stainless Steel Tank – Jacketed Process Vessel on Casters

Used Alloy Products 8.4 Gallon / 31.8 Liters Tank. 316L Stainless steel. Approximate 16" diameter x 7" straight side. Dished heads. Rated 125 psi at -20 to 300 degrees F. Sidewall & bottom head jacket. Mounted on casters. Serial# C224599-1-0031. Built 2015.

MFR: Alloy Products