Food and Beverage Equipment

Sharples Decanter Centrifuge, Model P-3000 Decanter.

Used- Sharples Decanter Centrifuge, Model P-3000 Decanter. Stainless steel. Reportedly, refurbished with VFD control panel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Sharples

Used Flottweg Z4D-3/409 Sedicanter® Decanter Centrifuge | 316 Stainless Steel | 7,750 RPM | 30 kW Main Drive

Used- Flottweg Model Z4D-3/409 Sedicanter Decanter Centrifuge. 316 stainless steel. Max bowl speed 7750 RPM, 30 KW (40.2hp) Main drive motor, 7.5 KW (10hp) back drive motor, gearbox, feed tube, lube system, vibration switch/isolators, guards, chutes and control panel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Flottweg

Lot of (2) Used USA Lab 100LB Jacketed Tanks – 304 Stainless Steel, 60L Capacity

Lot of (2) Used- USA Lab 100LB Jacketed Tank, 304 Stainless Steel, Vertical. Approximate capacity 60 Liter. Approximate jacket capacity 18 liter. Mounted on (4) legs with casters.

Used Krauss Maffei Conical Dryer Model TMD 0.25/160 – Stainless Steel 316Ti, ATEX

Used Krauss Maffei Conical Dryer, Model TMD 0.25/160 "Titus-Mixer-Dryer," constructed from stainless steel 1.4571 (316Ti). This unit features a working pressure of 3 Bar (43.5 PSI) (vacuum possible), jacket working pressure of 6 Bar (87 PSI), and a capacity of 380 Liters (useful capacity 250 Liters). The cone measures 1016mm (40") in diameter and 1066mm (42") in height, with a dished top and a jacketed mixing screw (6 Liters). Powered by a 4.0 kW + 1.5 kW motor, 380 Volt (explosion-proof), and a jacket volume of 96 Liters. It operates at a maximum temperature of 165C and has a 150mm (6") bottom outlet. Manufactured in 1995, the dryer is mounted on a frame, includes switchgear, and is ATEX compatible. Dimensions are 2.0m x 2.0m (6.6' x 6.6') with a total height of 3.5m (11.5'), weighing 2650 KG. Serial Number 7005/742904/3.

MFR: Krauss Maffei

1250mm Krauss Maffei 316 Stainless Steel Horizontal Peeler Centrifuge

Used- 1250mm Krauss Maffei 316 Stainless Steel Horizontal Peeler Centrifuge, Model HZ125/2.5 Si. Siphon type peeler; 2.46 square meters filter area; 323.6 liters nominal basket volume; 60 hp main drive; 2 hp hydraulic pack.

MFR: Krauss Maffei

Used Alfa Laval NX-309 Solid Bowl Decanter Centrifuge

Alfa Laval NX-309 Solid Bowl Decanter Centrifuge, stainless steel construction (Product contact areas), base, casing, gearbox, mounted on a platform, 25 hp drive motor, hydraulic back drive. misc. spare parts, push button control. Used. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Used Kiefel 40mm Blown Film Line – Model CA4, 24:1 & 30:1 L/D, 30 HP Motor

Used- Keifel 40 mm Blown Film Line, Model CA4, 24:1 L/D. Lowboy extruder having an electrically heated, air-cooled barrel. A second complete barrel, screw, and heaters are included to convert the machine to a 30:1 L/D ratio. Gearbox is belt driven by a 30 HP Reliance D/C motor with SCR control. Includes hopper, water cooled gearbox, grooved feed throat, and operator control panel with seven (7) zones of temperature control. Instrumentation includes controllers for (4) barrel zones, (3) die zones, blower control, speed control dial, and gauges for extruder Amps, RPM, pressure, and melt temperature. S/N 0205. Manufactured in 1989. Very clean. 460/3/60 input power. Includes a 3? stationary blown film die less air ring. Includes 6.1 Kw air ring blower with 4 port plenum and a 38? Kiefel Model FW 811 single position surface winder for 36? diameter rolls. Includes winder operator control panel with preset footage counter, auto fly knife, auto transfer, second pull roll assembly, and two winding shafts. S/N 0141. 460/3/60 input power. Very Clean.

Used Peerless DA650 Double Arm Mixer – 4,400 lb Capacity, 150/75 HP, Heavy-Duty Industrial Mixer

Used- Peerless Model DA650 Double Arm Mixer. 4,400 lb mixing capacity. Working capacity 89.2 cubic foot, 121 cubic foot total. Driven by a 150/75 HP, 1750 RPM motor. Tilt motor 7.5 HP. Dimensions 132" long x 60" wide x 126" high. Shipping weight 26,300 pounds.

MFR: Peerless

Used EDI 89" Ultraflex H75 Sheet Extrusion Die – Precision Industrial Die

Used- EDI 89" Ultraflex H75 Sheet Extrusion Die. 000-.075 Lip Opening with .300 Lip Length. All Flow Surfaces Ultrachrome II Plated .001-.0015 Thick. 480 Volt Single Phase Operation. 9 Zones with a total of (14) 500 Watt Heaters. Horizontal Position Die Operation. Upper & Lower Body Compound Angle Upper Body. Lower Body Extra Thick End Plate. Lower Body is Drilled and Tapped 3/8-16" (8) Positions. 1.5" on Center on Both Ends of the Lower Body for Optional Deckeling. Mfg. 2000.

MFR: EDI

Used & Refurbished Alfa Laval Decanter Centrifuge – Model NX14 Series 400

Used & Refurbished Alfa Laval Decanter Centrifuge Model NX14 Series 400. Brand new control panel included Technical information: Throughput capacity up to 6 m3/hr Effective capacity depends on the characteristics of the product and the quality of clarification required around: 2.500 lt/hr avocado oil 2.500 lt/hr seed oil 10-11 q.li olive oil 1.500-2.000 lt/hr animal fat 1.400 lt/hr sludge plastic recovery 3.000 lt/hr vegetable drink 2.500-3.000 lt/hr animal blood Bowl diameter 353 mm Bowl length 888 mm Two phase (solid/liquid); open discharge liquids, open discharge solid Main motor 15 kW (VFD) Back motor 4 kW (on-off) if requested Bowl speed 4000 rpm Gear box 2,5 kNm 2-stage 1:159 Operator safety device included Torque overload device included Manual included New control panel PLC, TOUCHSCREEN SIEMENS 3F+N+PE 400 V50 Hz: VFD on the main motor (and self-braking back motor if requested Decanter Gross measures: 2600x1600x1600h mm Decanter Gross weight: 1250 kg Control panel Gross measusres: 100x30x60h mm Control panel gross weight: 80 kg Application examples Avocado oil Edible oil Fruit juice Curds and whey Seed oil (sunflower) Plastic recovery Biogas Chamomile Vegetable drinks Sludge. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Industrial Flottweg Decanter Centrifuge – Model S3E-3/408, Surimi Use, Excellent Condition

Used Flottweg Model S3E-3/408 Sedicanter Decanter Centrifuge. 316 stainless steel. Max bowl speed 7750 RPM, 10,100 x G, rated @ 1 TPH, 4" single lead TC spray conveyor, 15 KW motor 460/3/60, 4 KW backdrive, SIMP-drive 48.7:1 gearbox, feed tube, lube system, vibration switch/isolators, guards, chutes and control panel. Unitized on a SS skid. Prior use: Surimi. Excellent running condition.

MFR: Flottweg

Used 6" PFA Jacketed Lined Column – Corrosion-Resistant, Industrial-Grade

Used- 6" PFA Jacketed Lined Column.

MFR: Unknown