Food and Beverage Equipment

Sweco LS30S 30 Inch Circular Vibratory Screener - Used Stainless Separator

Used Sweco 30" Diameter Model LS30S Circular Screener, Stainless Steel. Double Deck, 3 separation. Driven by a 1/2 HP, 3/60/230/460 Volt, 1140 rpm motor. Mounted on painted carbon steel base with casters. Serial# 589-74F.

MFR: Sweco

Used – Cumberland 14-85 Pelletizer – 14” Pelletizer with 24-Knife Rotor & 30 HP Motor

Used Cumberland 14-85 Pelletizer 14" Pelletizer with 24-Knife Rotor & 30 HP TECO/Westinghouse AC motor, bolt on blades, ABB VS AC drive in panel mounted to base, new belts, new rotor and feed roll bearings, one knurled, one poly infeed roll, manual pull roll tension, machine is bolted onto a 33"H steel stand with fork rails and diamond plate steel stairs. blades sharpened, new hardware, 64" discharge height, approximately 101" feed height, wired for 460V. Footprint is 90"L x 56"W x 119"H.

MFR: Cumberland

Used Coperion Werner & Pfleiderer ZSK 30-W9/2 Twin Screw Extruder – High-Speed Lab & Production Compounding System

Used Coperion Werner & Pfleiderer ZSK 30-W9/2 Twin Screw Extruder High-Speed Lab & Production Compounding System. (2) 30 mm diameter side by side screws, 33.3:1 L/D ratio, 8 total barrel sections, (7) heated barrels, electrically heated water cooled. Driven by a 10.4 kw(14hp) -440-volt AC drive motor via a gear box. Screw speed maximum 500 RPM. Frame mounted, Control panel. Weight 1.1 tonnes. Extruder: 2800 mm L x 850 mm W x 1300 mm H. Previously used in a compounding application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: Werner & Pfleiderer

Used APV PGX 30 Twin Screw Extruder with K-Tron T22 Feeder – Compact Pilot Compounding System

Used APV PGX 30 Twin Screw Extruder with K-Tron T22 Feeder Compact Pilot Compounding System. 30 KG (66 lbs) per hour. (2) 30 mm diameter side by side screws, 10:1 L/D ratio. Electrically heated water cooled barrel. Driven by a 4 kw (5.36hp) -440-volt AC drive motor via a gear box. Screw speed maximum 161 RPM. Frame mounted on 4 wheels. K-Tron T22 twin screw feeder. Control panel mounted on extruder. Weight approx. 400 kgs. Extruder: 1800 mm L x 800 mm W x 2200 mm H. Previously used in a compounding application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: APV

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer. 41" straight side x 45" diameter tank dimensions, flat bottom. Scrape agitation. Has SPX product pump. With stainless steel electrical control cabinet. Mounted on skid. Built 2018.

MFR: Trans-Tech

Used 300 Cubic Foot Double Ribbon Mixer

Used-300 Cubic Foot Double Ribbon Mixer, ribbons and trough are stainless steel construction. Features carbon steel jacket rated for minus 20 to 250 degrees Fahrenheit at atmospheric pressure. Manufactured by Young Industries. Internal dimensions of mixing trough measure 178" long x 44" wide x 66" deep. Driven by 30 HP motor through heavy duty gearbox. Features end bottom discharge with butterfly valve.

MFR: Young Industries

3000 Gallon Jacketed Stainless Steel Dish Bottom Mix Tank

Used- 3000 Gallon Jacketed Stainless Steel Dish Bottom Mix Tank. 8' Dia. X 7' T/T. Half Pipe Stainless Steel Jacket. 2 HP, 230/460 volt Lightnin Series 10 Mixer. 3" Center bottom outlet with valve. Has slight cone top. Mounted on legs. Last used in Health/Nutritional/Biomedical Collagen products.

Used DCI Twin Motion Kettle, 3,000 Gallon | 316 Stainless Steel | Jacketed 150 PSI | Twin Agitators with Scrapers | Built 2007 | NB# 6749

Used- DCI Twin Motion Kettle, 3,000 Gallon, 316 Stainless Steel. Approximately 84" diameter x 120" straight side, dish top, cone bottom, jacketed on side and bottom cone rated 150 PSI at 200 Degrees F. Twin motion agitation with anchor agitator with bottom and sidewall scrappers, with 20 hp, 230/460 volt Nord motor drive, off set (4) tier four blade pitched turbine blade agitator with 25 hp, 230/460 volt Nord motor drive, 24" top manway, 3" bottom outlet, on 4 legs with approximately 42" discharge height, approximately 252" overall height, serial# JS3724B , national board# 6749, built 2007.

MFR: Feldmeier

Used 75 BBL Stainless Steel Brew Kettle – 3,000 Gal, Insulated, Open Top

Used- Brew Kettle, 75 BBL (2,325 gallon) Rated Capacity, Approximately 3,000 total capacity. Stainless steel construction, vertical. Insulated, Approximately 83" diameter x 134" straight side. Flat open top with clamp on cover, flat bottom. Open top: 2", 1-1/2", Side: 20" x 16" bottom manway, 17" x 12" side manway with cover. 3" Side bottom outlet with valve, 36" discharge height. Mounted on (6) stainless steel legs. Previously used for water. No manufacturers tag or jacket rating.

MFR: Unknown

3000 Gallon Samuel Pressure Group Horizontal Carbon Steel Pressure Tank.

Unused- 3000 Gallon Samuel Pressure Group Horizontal Carbon Steel Pressure Tank. 66" diameter X 214" OAL. Internal rated 165 PSI @ -20 to 400 F. Code Stamped. Dished ends Top side has two lifting lugs, (2) 1/2" NPT, (1) 3" NPT, and (1) 6" flanged fitting. One end has 12" X 16" manway, opposite has center 2" NPT. (1) 6" side flanged opening. (1) 1" bottom end drain. Mounted on saddles. Weight 5500#. Built 2022.

Used Cherry Burrell Vertical Mixing Tank | 3,000 Gallon 304 Stainless Steel Beverage Vessel

Used Cherry Burrell Vertical Mixing Tank with approximately 3,000 Gallon capacity, constructed of 304 stainless steel. Tank measures approximately 7' 9" diameter x 12' overall height, with a dome top and dish bottom. Previously used in a beverage processing application and last in service in November 2024, this tank is configured for sanitary liquid handling with CIP and agitation. Equipped with a side-mounted 1 HP agitator, driven by a 3/60/230/460V, 850 RPM motor, providing gentle mixing for beverages, syrups, and other low- to medium-viscosity liquids. Features a side manway, 3" Tri-Clamp center bottom discharge, CIP sprayball, and top-mounted inlets for clean-in-place operation and flexible process connections. Mounted on stainless steel legs.

MFR: Cherry Burrell

Used Mueller 30,000 Gallon Stainless Steel Insulated Dairy Silo – Vertical Milk & Whey Storage Tank

Used- Mueller Stainless Steel Insulated Dairy Silo, 30,000 Gallons. 140" internal diameter x 518 1/8" height. Built 1996. Side bottom manway. Previously used for whey.

MFR: Mueller Corp