Food and Beverage Equipment

Doyle and Roth Vacuum Cooler Condenser

Used- Doyle and Roth Vertical Shell and Tube Condenser, Approximate 18 Square Feet. Carbon steel shell rated 150psi / FV external at -20 to 300 degrees F. (50) 3/4" diameter x 24" long 316L Stainless Steel tubes rated 15 psi / FV at -20 to 350 degrees F. Baffle spacing 3.5". Single pass. Side lug mounted. National Board# 20757, Serial# S1998.

MFR: Doyle & Roth

Used Kohler 180 kW Natural Gas Generator | Detroit Diesel Series 50 Engine | 352 Hours | Model 180RZDB | Built 2000

Used- Kohler Natural Gas Generator, rated at 180 kW, built in 2000 with 352 hours. Package information: Kohler 180RZDB ser no. 2066339. Engine information: Detroit Diesel 50-Series ser no. 04R0047875.

MFR: Kohler

Used PHT 180-Ton Stainless Steel Industrial Ice Generator – 36 Ice Plates with Ammonia Pump & Receiver

Used-PHT Stainless Steel Ice Generator. 180 ton capacity. 480V. SN 921602. Built 1997. Includes: 400 psig receiver tank, -20 degrees F at 250 PSI MAWP; Nikkiso Model HQ23C-B2 ammonia pump; and (4) ice banks with (9) ice plates each. (36) ice plates total.

Used 1999 PHT 180-Ton Stainless Steel Ice Generator – 36 Ice Plates with Nikkiso Ammonia Pump

Used-PHT Stainless Steel Ice Generator. 180 ton capacity. 480V. SN 991625. Built 1999. With 300 PSIG receiver tank, rated -20 degrees FG at 250 PSI MAWP. Nikkiso Model HQ23C-B2 ammonia pump. (4) Ice banks with (9) ice plates each. (36) ice plates total.

Used 2012 PHT 180-Ton Stainless Steel Ice Builder – 36 Ice Plates, Nikkiso Ammonia Pump & 510-Gallon Receiver

Used-PHT Stainless Steel Ice Builder. 180 ton capacity. 480V. SN 11634. Built 2012. With 510 gallon, 300 PSIG receiver tank, rated -20 degrees F at 250 PSI MAWP. Nikkiso Model HQ23C-B2 ammonia pump. (4) ice banks with (9) ice plates each. (36) ice plates total.

Used 2000 PHT 180-Ton Stainless Steel Ice Generator – 36 Ice Plates with Cornell Ammonia Pump & 516-Gallon Receiver

Used-PHT Stainless Steel Ice Generator. 180 ton capacity. 480V. SN 991627. Built 2000. 516 gallon receiver tank, 300 PSIG, -20 degrees F at 250 PSI MAWP. Cornell Model A222590-55X1-A00 ammonia pump. (4) Ice banks with (9) ice plates each. (36) ice plates total.

Unused CMS 180.8 Sq. Ft. 316L Stainless Steel Vertical Shell and Tube Condenser

Unused CMS Heat Transfer Division 180.8 Square Foot 316L Stainless Steel Vertical Shell And Tube Heat Exchanger With 150 PSI Pressure Rating, Built 2017. Industrial vertical shell and tube heat exchanger designed for vapor condensation, chemical process cooling and industrial heat transfer applications. Features approximately 180.8 square feet of heat transfer surface area with (85) straight tubes constructed of 316L stainless steel, each measuring 3/4" in diameter. Shell and tubes are constructed of 316L stainless steel and rated for a maximum allowable working pressure of 150 psi and full vacuum at operating temperatures ranging from -20 F to 500 F. Vertical configuration designed for installation in process systems requiring vapor condensation and heat removal. Process connections include (2) 2" shell-side openings, (3) 4" shell and head openings, and (3) 3/4" auxiliary nozzles. Originally designed as a Dehydretor Column Condenser. Manufactured in 2017 by CMS Heat Transfer Division, Inc., Bohemia, New York, for Cincinnati Heat Exchangers. Serial #2740.4. National Board #1832. Possible applications include vapor condensation, dehydretor column overhead cooling, chemical process condensation, distillation overhead vapor recovery, solvent vapor condensation, industrial process cooling, heat recovery and thermal management of other compatible chemical vapors and process fluids.

Used Toshiba 1800 HP 3-Phase Induction Motor, Model 3UJML162971 – High-Power Industrial Motor

Used Toshiba 1800HP 3-Phase Induction Motor, Model # 3UJML162971. 3/60/2300-4160V. 3540 RPM. Suitable for altitude. Serial # 140702955, Built 2014.

MFR: Toshiba

Used 18,000 Gallon Reco Industries Vertical Stainless Steel Tank – Insulated Bulk Storage Vessel

Used 18,000 Gallon Reco Industries Vertical Stainless Steel Tank Insulated Bulk Storage Vessel. SA36 Stainless steel. Approximately 11' 6'' diameter x 24' tall. Insulated. Vertical.

MFR: Reco

Used Lundberg Carbon Steel Vertical Tank, Approx. 18,000 gallon capacity

Used- Lundberg Carbon Steel Vertical Tank, Approx. 18,000 gallon capacity. Slight cone top, flat bottom; 12 diameter X 22 high straight side; Multiple top fittings and side bottom outlets; 24" side bottom manway. Insulated and covered with sheathing. Includes ladder with safety cage. Built 2017. Previously stored 50% caustic.

Used Alloy Manufacturing Co. 1821 gallon vertical INCONEL 600 tank. INCONEL 600 is used in applications which require resistance to corrosion and heat. This tank has a flat top and a sloped bottom. T...

Used-Alloy Manufacturing Co. 1821 gallon vertical INCONEL 600 tank. INCONEL 600 is used in applications which require resistance to corrosion and heat. This tank has a flat top and a sloped bottom. The tank diameter is 76", the overall height is 125", the straight side height is 90", and the slope is 6". The top has an 18" manway, a 2" flange, a 2" Tri-clamp, and a 1" NPT. The side has (3) 1/2" NPT, (1) 1/2" flange, and (1) 2" NPT. The bottom has a 2" diameter flanged discharge 10.5" from the ground. The overall dimensions are 80" diameter x 125" tall. Last used for beverage alcohol.

Used Doyle & Roth Shell and Tube Heat Exchanger – 1,824 Sq Ft, 304 Stainless Tubes

Used Doyle & Roth Shell And Tube Heat Exchanger With 1,824 Square Feet Of Heat Transfer Surface Area And 304 Stainless Steel Tubes, Built 1992. Designed for indirect heat transfer between separate shell-side and tube-side process streams through the tube walls. Features (929) 304 stainless steel tubes measuring 3/4" in diameter x 10' long. Tube-side rating is 86 pounds per square inch and full vacuum at 400 degrees F. Carbon steel shell is rated for 150 pounds per square inch at 150 degrees F. The stainless steel tube bundle provides the heat transfer surface, while the carbon steel shell contains the surrounding process or utility stream. National Board number 15755. Serial number J-6759-4. Possible applications include liquid-to-liquid process cooling, temperature control and heat recovery involving compatible process fluids and cooling water, subject to separate shell-side and tube-side pressure-temperature limits, materials compatibility and thermal design requirements.

MFR: Doyle & Roth