Food and Beverage Equipment

Buy Used Stainless Steel FMC Vibrating Conveyor with Dimpled Trough

Used- FMC Model EL 2412/08 X 70 Link-Belt Vibrating Conveyor. Stainless steel construction. Dimpled trough approximate 96" long x 24" wide x 8" deep with 11-3/4" diameter discharge. Driven by 1hp motor. Serial# 806532 12/99. 3/60/460 Volt.

MFR: Heat & Controls

Used Fortress Technology Metal Detector – Model Phantom | 10.5" x 13" Aperture | Ferrous & Non-Ferrous | Food & Pharma Safe

Used- Fortress Technology Metal Detector, Model Phantom. 10.5" H x 13" W aperture. 3phase 220volt 5 amp electrical requirements. OAD: 7 L x 2.5 W x 4 H. Works for Ferrous and non-Ferrous metals. Food and Pharmaceutical safe.

Pre-Owned Frazier Bucket Elevator with 10" x 5.5" Buckets – Formerly Used for Candy & Mints

Used Frazier and Son Whiz-Lifter Bucket Elevator. Bucket size 10" wide x 5-1/2" x 3" deep. Infeed height - 14". Infeed length - 25 1/2". Discharge height - 149". Discharge length - 63 1/2". Overall height - 160". Overall length - 85". Horizontal reach (dimension from back of elevator vertical shaft to center of discharge spout) - 50". Overall footprint dimensions - 85"L x 21"W x 160"H. Serial# 80-3-750. Last running candies/mints.

MFR: Yamato

Unused 2021 Fuji Machinery FW3410/B Alpha 8 Automatic Box Motion Wrapper – High-Speed Horizontal Flow Wrapper

Unused 2021 Fuji Machinery FW3410/B Alpha 8 Automatic Box Motion Wrapper High-Speed Horizontal Flow Wrapper. Right handed unit. Includes 2021 Markem Imaje SmartDate X65 Thermal Transfer Printers (New in Box). Capable of speeds from 10 - 150 packages per minute (depending on application). Cut off length: 130mm - 430mm, largest product size: 200mm/100mm.

MFR: Fuji

Fuji FW 3410/Ba7 Box Motion Flow Wrapper – Up to 150 PPM

Used Fuji Horizontal Box Motion Flow Wrapper, Model FW 3410/Ba7. Machine is rated for speeds from 10 to 150 packages per minute (depending on package and product size). Has a product size range of: 0.25" to 3.93" in height, 0.25" to 11" wide, 5.11" to 16.92" in length. Film width up to 25" wide. Has an integrated control panel with a Proface color touchscreen HMI, Yaskawa MP2200 PLC, Yaskawa Servo Drives. Includes Markem Smart Date X60 printer. Infeed conveyor 9-1/2" wide x 35" long. Outfeed conveyor 9-1/2" wide x 98" long. 3/60/220V. OAD: 189"L x 50"W x 76"H.

MFR: Fuji

Unused Fulton VSRT-125 Steam Boiler | 125 HP Vertical Tubeless High Efficiency Boiler

Installed, tested, and not used afterward ******* Used Fulton VSRT-125 Vertical Tubeless Steam Boiler rated at 125 boiler horsepower with a steam output of approximately 4,300 lb./HR and a fuel input of about 5.0 MMBTU/hr. 193.2 sq/ft heating surface. It utilizes a two-pass vertical design with a spiral rib heat exchanger and a fully water-backed pressure vessel with no refractory. Typical thermal efficiency is in the 8286% range with steam quality =99.75%. The unit is equipped with a fully modulating, linkage less burner capable of up to a 10:1 turndown ratio and is configured for natural gas, propane, or dual fuel, with NOx emissions typically below 20 ppm depending on setup. Maximum operating pressure is typically rated up to 150 PSIG (design pressure may vary by unit). Approximate dimensions are 100" deep, 75" wide, and 140" high, with an operating weight approximately 19,000 lbs. Serial# F10116417A, National Board# 11514, built 2024.

MFR: Fulton

Used Furis FRS-590 Automatic Bath Bomb Packaging Line – 150 PPM – PVC, POF, PE Films

Used- Furis Machinery Automatic Bath Bomb Packaging Line, Model FRS-590. Consisting of Automatic feeder; Packing machine; and Shrink tunnel. Set up for 40-75mm bath bombs. Rated at speeds of 30-150 pieces/min. 450mm maximum film width. PVC, POF, & PE film types. Previously used for bath bombs.

Used GEA Powerpak 540 Thermoforming Packaging Machine – Rigid/Tyvek, Medical Grade

Used- GEA Powerpak 540 Thermoforming Packaging Machine; Web width of machine - 540mm; Packaging material - Forming: Rigid, PETG up to .040"; Non forming - Tyvek; Dieset configuration - 4- up, (2tracks x 2row) 3- up, (3tracks x 1row); 10 to 12 cycles per minute; 208 Volts, 3 Phase, 60 Cycle; Compressed Air -100 PSI;Water - 45 Liters per Hour/12 Gallons per Hour; Forming Web Width - 540mm +2 / -0; Non- Forming Web Width - 530mm + 2 -1mm; Film Cores- 3" and 6"; Forming Film Roll Size - 500mm Max OD; Non Forming Roll Size - 500mm Max OD; Vacuum Pumps - Busch 1144 BV forming vacuum pump; Mfg. 2016; Last used on Medical Products.

Used GEA Westfalia Desludger Disc Centrifuge – Model MSA-90-01-076

Used GEA Westfalia Desludger Disc Centrifuge Model MSA-90-01-076, stainless steel construction (product contact areas), max bowl speed 5920 rpm, light and heavy phase centripetal pump liquid discharge, 18.5 kW drive motor (220-380/3/50), control panel. Previously used in a dairy cream application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: GEA Westfalia

GEA Westfalia SA7-06-076 Desludger Disc Centrifuge. Used.

Used-GEA Westfalia SA7-06-076 Desludger Disc Centrifuge, 316 stainless steel construction (product contact areas), maximum bowl speed 8400 rpm, clarifier design (liquid/solids separation), centripetal pump liquid discharge, direct drive, by an approximate 6.6 hp drive motor, control panel. Frame mounted. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: GEA Westfalia

GEA Westfalia Separator, used.

Used- GEA Westfalia Separator; Model OSD 2-02-137; 10,000 RPM; 1 Liter Volume; .5 Liter Solids holding. 0.8 kW(1.07hp) 3/50/60 Hz motor. Maximum Separating temperature 212 degrees F; 25" Long x 25" Wide x 33" High; Approximately 154 lbs. Last used for R&D purposes. Serial# 9077-113

MFR: GEA Westfalia

Used – GEA Westfalia MSD-60-01-076 Desludger Disc Centrifuge – Stainless Steel, Dairy Application

Used GEA Westfalia MSD-60-01-076 Desludger Disc Centrifuge Stainless Steel, Dairy Application, max bowl speed 6540 rpm, separator design, 11 kW (14.75hp) drive motor (220-380/3/50). Previously used in a dairy cream application. Previously used in a dairy/cheese application. Overall dimensions: 1250 mm (4) x 950 mm (29") x 1500 mm (49") high. Weight 765 kgs (1683 LBS).

MFR: GEA Westfalia