Food and Beverage Equipment

Alfa Laval NX-414-B-31G Decanter Centrifuge – High-Speed Solid-Liquid Separator

Used Alfa Laval NX-414-B-31G high-speed solid-liquid decanter centrifuge. Stainless steel product-contact areas. Maximum bowl speed 4000 rpm with single row of lined solids discharge ports; includes base, casing, gearbox, and feed pipe. Sold without stand and without controls. Removed from service in 2017 after use on organic soybean oil degumming

MFR: Alfa Laval

Used Dorr Oliver 12L Solid Bowl Decanter Centrifuge – Stainless Steel, 5000 RPM, Reconditioned

Used- Dorr Oliver 12L solid bowl Decanter Centrifuge, Stainless steel construction (product contact areas), max bowl speed 5000 rpm, 2.5" double lead conveyor, centripetal pump liquid discharge, base, stainless steel solids discharge chute, bowl cover, 35:1 ratio cyclo gearbox. 15 hp drive motor (460/3/60), vibration switch, belt guard. (Reported to be reconditioned and unused since)

MFR: Dorr Oliver

Used Carrier Fluid Bed Dryer – Model FTDAD/C2460S, Gas-Fired, 24" x 5.5' Heated Section, Carbon Steel

Used- Carrier Fluid Bed Dryer, Model FTDAD/C2460S. 24" wide x 56 heated section and 2 cooling section. Gas fired. Carbon steel wetted parts. 316 strokes. 890 rpm, 460 volt. Built 2012.

MFR: Carrier

Unused Triveni Steam Turbine Generator – Model TST-2100LR, 9.8 MW, 1800 RPM

Unused Triveni Steam Turbine Generator Model TST-2100LR, 9.8 MW, 1800 RPM. 38.57 bar at 395 degrees C (743 degrees F.) inlet, 57 t/h. 0.288 bar at 68.2 degrees C (154.76 degrees F.) exhaust. 19.7 bar at 316.1 degrees C (600.98 degrees F.) bleed. 1800 RPM. Built 2018.

Used Tenrite Model TDM Cutting/Decalyx Machine – 60 kg/hr, Straight & V-Cut, 25mm Depth, 230V, Built 2024

Used- Tenrite Model TDM Cutting/Decalyx Machine. Rated approx. 60 kg/hour (approx. 132 lbs.). Straight cut and V-cut capable. 25mm max. cutting depth. 50/230V. Built 2024. Previously used for strawberries.

Used Pieralisi Jumbo 3 Containerized Mobile Decanter Centrifuge System | 3350 RPM | 350L Viscotherm Pump | 70 BAR | Stainless Construction | Built 2007

Used Pieralisi Jumbo 3 Containerized Mobile Decanter Centrifuge System | 3350 RPM | 350L Viscotherm Pump | 70 BAR | Stainless Construction | Built 2007. Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04172.

MFR: Pieralisi

Used Pieralisi Jumbo 3 Mobile Decanter Centrifuge | Containerized System | 3350 RPM | 350L 70 BAR Viscotherm Pump | Built 2007

Used Pieralisi Jumbo 3 Mobile Decanter Centrifuge | Containerized System | 3350 RPM | 350L 70 BAR Viscotherm Pump | Built 2007 Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04171.

MFR: Pieralisi

Used Pieralisi Jumbo 3 Industrial Decanter Centrifuge | 3350 RPM | Containerized Stainless System with Viscotherm Pump | Built 2007

Used Pieralisi Jumbo 3 Industrial Decanter Centrifuge | 3350 RPM | Containerized Stainless System with Viscotherm Pump | Built 2007. Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04385.

MFR: Pieralisi

Used Pieralisi Jumbo 3 Oilfield Decanter Centrifuge System | Mobile Containerized Unit | 350L 70 BAR Pump | Drilling Mud Service

Used Pieralisi Jumbo 3 Oilfield Decanter Centrifuge System | Mobile Containerized Unit | 350L 70 BAR Pump | Drilling Mud Service. Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04444, built 2007.

MFR: Pieralisi

Used Pieralisi Jumbo 3 Mobile Decanter | Containerized Centrifuge System for Sludge & Wastewater | 3350 RPM | Built 2007

Used Pieralisi Jumbo 3 Mobile Decanter | Containerized Centrifuge System for Sludge & Wastewater | 3350 RPM | Built 2007. Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04388.

MFR: Pieralisi

Used Tomoe PTM500 Decanter Centrifuge with Fully Tiled Conveyor

Used- Tomoe Decanter Centrifuge, Model PTM500. Fully tiled conveyor for added wear protection and bearing lubrication system. Machine mass is 6,600 kg (approximately 14,551 lbs). Suitable for continuous solids-liquid separation, dewatering, clarification, and classification applications including ethanol processing, spent grains, industrial slurries, and similar process products. Built 2012.

MFR: Tomoe

Used Grieve HC-550 Industrial Oven – Electric, 550°F Max Temp | 30kW

Used Grieve Model HC-550 industrial electric airflow cabinet oven designed for drying, curing, baking, preheating, heat treating, and general thermal processing applications. This Grieve HC-550 oven is rated for 30 kW electric heat input and has a maximum operating temperature of 550F. The unit operates on 460-volt, 3-phase, 60 Hz power and draws 41 amps during operation. It is equipped with a 1.5 HP largest motor load, 5 kA symmetrical short-circuit current rating, and NEMA Type 1 enclosure for basic electrical protection. Built in 2011, Serial / Electrical Drawing Number 103340A0611, this industrial cabinet oven may be suitable for manufacturing, metal parts drying, coating and paint curing, adhesive curing, plastics and composites processing, electronics thermal processing, aerospace and automotive components, laboratory heating, research and development, and other controlled heating applications. This used Grieve industrial oven may be relevant for buyers searching for a used Grieve HC-550 oven, electric cabinet oven, industrial drying oven, airflow cabinet dryer, 550F oven, 30 kW industrial oven, 460V 3-phase oven, heat treating oven, curing oven, or thermal processing oven. Aaron Equipment freight specialists can assist with door-to-door transportation, export documentation, customs paperwork, and equipment logistics.