Cosmetics Equipment

Used EnviroStar ES 500 Centrifugal Spray Dryer – Stainless Steel, PLC Controlled

Used EnviroStar Centrifugal Spray Dryer, Model ES 500. Stainless steel. Drying capacity up to 2.0 kg per hour. Inlet temperature 350 degrees F. Pneumatic: 5 CFM @ 45 PSI, Atomizer Cooling Water: 1/4" Poly Line @ 1 LPM. Includes rotary atomizer, Vacuum exhaust blower with collection cyclone, High efficiency collection cyclone with integrated lighting and inspection ports. Allen Bradley PLC and HMI. Integrated HEPA inlet air filtration, Electrical: Dryer main power 208/240V, 3Ph, 54A 50/60Hz. Peristaltic pump: 110V 2A or 220V 1A 50/60Hz. 304 stainless steel construction. FDA-compliant design and UL certified.

Used Sinoped LPG-5 Spray Dryer – High-Speed 25,000 RPM Food-Grade Powder Drying System (2023)

Used- Sinoped Spray Dryer, Model LPG-5. 5 kg/hour (approx. 11 lbs./hour) evaporated capacity. Approx. 3.94' diameter x 9.19' height chamber size. 25,000 RPM rotating speed. 18 kW electrical heater. 3/60/208V. Built 2023. Previously used for food/beverage emulsion powder.

Unused Paul O. Abbe BM-223 Ball Mill – Stainless Steel Industrial Grinding Mill

Unused Model BM-223 all-stainless-steel ball mill with a 2-degree tapered cylinder for full discharge and split, hinged clamshell dry discharge housing. Mill cylinder measures 40" diameter x 44" long inside the shell with 5/8" shell thickness, 304 stainless steel product-contact construction, and 32 RA internal finish with 180 grit polish. Welded lifter bars terminate 1.5" from the ends, with welds ground to a minimum 1/4" radius and finished pit-free. Total mill volume is 32 cubic feet / 234 gallons with an 8 cubic foot dry working volume, equal to 25% of total volume. Unit includes a 13.25" x 14.75" rectangular cover hatch, contoured stainless steel grinding cover, and stainless steel dry discharge cover with 0.25" slots. The dry discharge housing fully encloses the cylinder and incorporates the patented 2-degree taper for full discharge, stainless steel counterweights, nominal 60-degree chute/hopper, 12" square bottom discharge opening, 48" discharge height, and sliding UHMW top cover. Driven by an SEW hollow-bore 20 HP TEFC motor rated for 230/460V, 3-phase, 60 Hz operation with nominal cylinder speed of 24 RPM. Unit is supported by two welded carbon steel A-frame stands with height extensions and Sherwin-Williams Tile Clad epoxy coating. Overall dimensions are approximately 138" high x 105" long x 64" deep. Possible applications and suitable products include dry batch grinding, milling, blending, and size reduction of compatible powders, pigments, ceramics, chemicals, minerals, and other dry solid materials.

MFR: Paul O Abbe

Friedrich Industrial Ovens (Qty 2) – Process Heating Ovens Lot

Qty. (2) used Friedrichs ovens offered as one lot. Oven components are located at two locations, with parts stored at Rick's Shop and the main oven located at a rigging company. Lot includes only (1) control cabinet and (1) stainless steel exhaust system to be shared with the two-oven package. Possible applications and suitable products include industrial heating, drying, curing, or other compatible oven-processing applications.

New Sweco 30” Diameter Screens – Lot of Vibratory Separator Screens (Various Mesh Sizes)

New/ Unused Sweco Parts. Lot of 30" Diameter Screens with various mesh sizes.

MFR: Sweco

Used Press Technologies 120-WT Twin Wire Wedge Thickener | 10’ Belt Sludge Dewatering System

Used- Press Technologies Twin Wire Wedge Thickener, Model 120-WT. 10' wide belt. Uses (2) 40 HP dual press drive motors. Utilizes (2) 12'' wide filtrate drain troughs. Pulp is discharged through 25 HP screw conveyor. Includes all associated electrical components, transformers, pumps, motors, and valves.

MFR: Press Technology

Used DCI 50,000 Gallon Stainless Steel Silo | Vertical Dairy & Water Storage Tank

Used DCI Silo, 50,000 Gallon, Stainless Steel, Vertical. Approximately 12' 6" diameter x Overall height of 50'. Last stored water and before that, milk. Wt. Approximately 35,000 lbs. Need to confirm. Serial# 95-D-51150.

MFR: DCI

Used Crepaco 50,000 Gallon Stainless Steel Silo | Vertical Dairy & Water Storage Tank

Used Crepaco Silo, 50,000 Gallon, 11' 6" Diameter x 70' Long. Vertical, Slight crinkle on top head (inside). Vessel is in good working condition. Last held water and before that milk. Approximately 35,000 lbs.

MFR: Crepaco

Unused Admix 425 Fast Feed Continuous Mixer

Unused Admix "Fast Feed" Mixer, Model 425. Speeds up to 500 lbs./minute depending on model configuration and powder type. 3.4 Cubic foot hopper. 2" Inlet/ 2" outlet. 7.5HP pump. 7.5HP Mixer. Dimensions approximate 60" x 33" X 37"T.

MFR: Admix

Unused Goulds 3196 316 Stainless Steel ANSI Centrifugal Pump

Unused Goulds 3196 ANSI centrifugal pump, size 1.5 x 3-6, with 316 stainless steel construction, 316 stainless steel shaft, shaft sleeve, and seal gland. Pump features flood-oil lubrication, a Rexnord ES-e coupling, aluminum non-sparking coupling guard, and cast-iron baseplate. Driven by a 7.5 HP, 3,600 RPM, 3-phase, 60 Hz, 230/460-volt explosion-proof P.E. motor with Class F insulation and 1.15 service factor. Rated operating condition is 150 GPM at 40 pounds per square inch for Ethanol SDA 40B - 200.

MFR: Goulds

Goulds 3196 1.5 x 3-6 Stainless Steel Process Pump

Unused Goulds 3196 ANSI centrifugal pump, size 1.5 x 3- 6, featuring 316 stainless steel construction, 316 stainless steel shaft, shaft sleeve, and seal gland. Equipped with flood-oil lubrication, Rexnord ES-e coupling, aluminum non-sparking coupling guard, and cast-iron baseplate. Driven by a 7.5 HP, 3,600 RPM, 3-phase, 60 Hz, 230/460-volt explosion-proof P.E. motor with Class F insulation and a 1.15 service factor. COS: 100 GPM at 40 pounds per square inch for Ethanol SDA 40B - 200.

MFR: Goulds

Used American Extrusion International One-Pass Oven Dryer, Model 1P1036SAE – Continuous Stainless Steel Dryer Rated Up to 1,000 Lbs/Hour

Used American Extrusion International One-Pass Oven Dryer, Model 1P1036SAE Continuous Stainless Steel Dryer Rated Up to 1,000 Lbs/Hour. Designed for continuous drying applications with production rates of up to 1,000 pounds per hour, depending on product characteristics and application requirements. The unit features a single-pass design with an operating temperature of approximately 350F (50F) and an adjustable product residence time ranging from 1.5 to 8 minutes. Equipped with a Pentair, Model N360846G050 air conditioning system rated for 7777/8166 BTU per hour cooling capacity, the system operates within a temperature range of 50F to 131F and utilizes R134A refrigerant. The refrigeration system is rated for a maximum high-side pressure of 404 PSIG and a low-side pressure of 181 PSIG. Additional features include a user-friendly touchscreen HMI for process monitoring and control, stainless steel construction for durability and sanitation, and leveling feet for stable installation. Overall dimensions are approximately 250" long, 82" wide, and 94" high, 6000#. Electrical requirements are 460 volts, 3 phase, 60 hertz. Serial # 1954-1P1036SAE, Built 2014. This oven dryer was previously utilized in a snack food drying application.