Cosmetics Equipment
Stock No.:
53762002Used Sweco Model XS48S66TLUE Vibratory Screener – 48” Diameter, Stainless Steel
Used- Sweco Model XS48S66TLUE Vibratory Screener, Stainless Steel. Approximately 48" inside diameter screen. Single deck, single separation. Driven by a 2.5 HP Motor. Mounted on a Carbon Steel base. Serial# 308513-A08/05.
MFR: Sweco
Stock No.:
53762003Used Sweco 48” Vibratory Screener – Model XS48S66, Stainless Steel, Single Deck
Used- Sweco 48" Diameter Vibratory Screener, Model XS48S88, Stainless Steel. Approximately 48" inside diameter screen. Single deck, single separation. Driven by a 2.5 HP Motor. Mounted on a Carbon Steel base. Serial# 642963-B996.
MFR: Sweco
Stock No.:
53992001Used Sweco 48" Vibro-Energy Separator – 3 Deck Stainless Steel
Used Sweco Model XS48S888BVCBP4SDTL Vibro-Energy Separator, 48" Stainless Steel. Double deck, 3 Separation. Driven by 2.5 HP, 3/60/208-230 Volt, 1160 rpm motor. Mounted on stainless steel base. Serial# 185552-A01/19. Unit does not include screens.
MFR: Sweco
Stock No.:
54234013Used Sweco 48" Vibro-Energy Separator – Model XS48S88HSTL | Stainless Steel
Used Sweco 48" Diameter Vibro-Energy Separator, Model XS48S88HSTL. Stainless steel contact parts. Single deck, 2 separation. Driven by a 2.5hp, 3/60/460 volt, 1740rpm motor. No top cover. Mounted on painted carbon steel base. Serial# 188375-A01/19.
MFR: Sweco
Stock No.:
54687096Used 48 cu.ft. (estimated) Clow filter press. It is equipped with 52 each 1200 mm (47 5/8" x 47 5/8" x 2 1/8") non-gasketed recessed poly plates. This unit is sheathed with plastic for corrosive envi...
Used-48 cu.ft. (estimated) Clow filter press. It is equipped with 52 each 1200 mm (47 5/8" x 47 5/8" x 2 1/8") non-gasketed recessed poly plates. This unit is sheathed with plastic for corrosive environments. 4" center feed with 4 each, 2" corner returns. Built in plate shifter. Hydraulic closure via a 10 hp hydraulic power unit, 208-230/460 vac 3 ph power required. This unit was connected to a central control panel that controlled multiple machines. The control panel is not included.
MFR: Clow
Stock No.:
54469001Used Atlas Copco XAS 185 (JD) Trailered Air Compressor | 185 CFM Rotary Screw Diesel Unit
Used- Atlas Copco Trailered Rotary Screw Air Compressor, Model XAS 185 (JD). Maximum final pressure 123 PSIG at 185 CFM. Contains a 49 HP John Deere Engine. 3 cylinder. Maximum 2750 RPM. Has a 25 gallon fuel tank. 992 hours run, built 2007.
MFR: Atlas Copco
Stock No.:
54687011Used Krauss Maffei MT 1/200 316L Stainless Steel Mixer Vacuum Dryer
Used Krauss Maffei Mixer Vacuum Dryer MT, Model MT 1/200. Serial # 7098. National Board # 21424. Constructed of 316L stainless steel. Interior has polished surface. Conical vessel has a capacity of 49.43 cuft with working volume of 35.3 cuft. Dryer uses an 8" diameter inclined orbiting screw, driven by a 10 hp drive to gently agitate product while drying. Can dry particles up to 5 mm in size. Vessel is rated for Full Vacuum/150 psi @ 450 f on jacket and internal. Actual drying temperature maximum is 302 f. The top has an 18" manway with 6" sight glass, 18" flanged fitting, 4" sight glass, (2) 3" flanged fittings, (2) 2" flanged fittings, 6" flanged fittings and (2) 1" threaded fitting for the top jacket. The side has (2) 2" flanged fittings for the body jacket. The bottom has a 10" flanged discharge fitting with pneumatically operated flush mount valve and (2) 1" threaded fittings for bottom jacket.
MFR: Krauss Maffei
Stock No.:
40426004Unused Sonic Colloid Roto-Mill RM4 | 4" High-Shear Sanitary Colloid Mill (316L SS)
Unused Sonic Colloid Roto-Mill, Model RM4. 4" size. 316L stainless contact surfaces. 10-50 GPH gravity flow rate, 150-600 GPH pressure feed rate. Driven by a 5 HP, 3600 RPM, 3ph/230/460V motor. With controls. Mounted on cart with casters. Built 2024.
MFR: Sonic
Stock No.:
40426005Sonic RM4 Sanitary Colloid Mill | Unused 4" High-Shear Roto-Mill
Sonic RM4 Sanitary Colloid Mill | Unused 4" High-Shear Roto-Mill. 316L stainless contact surfaces. 10-50 GPH gravity flow rate, 150-600 GPH pressure feed rate. Driven by a 5 HP, 3600 RPM, 3ph/230/460V motor. With controls. Mounted on cart with casters. Built 2024.
MFR: Sonic
Stock No.:
40426006Unused Sonic RM4 Colloid Roto-Mill | High-Shear Inline Processing System
Unused Sonic RM4 Colloid Roto-Mill | High-Shear Inline Processing System. 4" size. 316L stainless contact surfaces. 10-50 GPH gravity flow rate, 150-600 GPH pressure feed rate. Driven by a 5 HP, 3600 RPM, 3ph/230/460V motor. With controls. Mounted on cart with casters. Built 2024.
MFR: Sonic
Stock No.:
40426007Sonic RM4 Mobile Colloid Mill | 4" High-Shear Emulsification System
Sonic RM4 Mobile Colloid Mill | 4" High-Shear Emulsification System. 316L stainless contact surfaces. 10-50 GPH gravity flow rate, 150-600 GPH pressure feed rate. Driven by a 5 HP, 3600 RPM, 3ph/230/460V motor. With controls. Mounted on cart with casters. Built 2024.
MFR: Sonic
