Cosmetics Equipment

Clear
https://images.aaronequipment.com/ItemImages/Conveyors/Screw-Conveyors/53629001_aa.jpg

Stock No.:

53629001

Used 20" Diameter x 15' Long Inclined Auger Conveyor – 3 HP Motor | 480V | Heavy-Duty Industrial Screw Conveyor

Used- 20" Diameter x 15' Long Inclined Auger Conveyor. Driven by a 3 HP, 3/60/480V, 1735 RPM motor.

https://images.aaronequipment.com/ItemImages/Mixers/Drum-Tumble/54131001_aa.jpg

Stock No.:

54131001

Used Yargus Layco Rotary Drum Blender System – 8 Ton Capacity

Used- Yargus Layco Rotary Drum Blender System. 8 ton capacity, 60 lbs per cubic foot; 304 stainless steel construction; Stainless steel drum head; (2) 15,000 lb. trunnion rollers. 20HP electric motor, Nord gearbox. With 304 stainless steel weigh hopper (approx. 144" x 95" ), 12' L x 2' W transfer conveyor, 12' L x 2' W loadout conveyor, and control panel Built 2018. Previously used to blend aggregates.

https://images.aaronequipment.com/ItemImages/Mixers/Homogenizer-Mixers/IKA-Works_54163003_aa.jpg

Stock No.:

54163003

Used IKA Works High Shear Mixer / Homogenizer – Stainless Steel, 20 HP

Used- IKA Works Mixer/Homogenizer Model DR 2000/10. Approximately 7-1/2" diameter x 6" deep chamber. Missing internals. Top bolt on cover with 2" diameter tri-clamp opening, 2" side bottom outlet. Driven by a 20hp 3/60/575V, 3537 rpm motor. Mounted Aerni Pressure Vessel, Model AR 139 rated for 26bar (377psi) at -70 to 200 degrees C (-94 to 392 degrees F). No Manufacturers tag, frame mounted.

MFR: IKA Works

https://images.aaronequipment.com/ItemImages/Chillers/Chillers/Trane-Co-CGAM_54489001_aa.jpg

Stock No.:

54489001

Used Trane CGAM 20-Ton Liquid Chiller

Used Trane CGAM 20-Ton High Efficiency Air-Cooled Scroll Liquid Chiller, Model CGAM 020F 2W03 AXD2 A1A1 B1AX XA1C 1A4X XX8B 1A1A 3A1D 1XXC XX. R-410A Refrigerant approximately 45lb charge. Lanced Aluminum Fins. Design pressure high side: 650 psi, low side: 238 psi. (2) 5HP pumps. 3/60/460 Volt. UL Listed. Serial# U21M04243. With Trane Air Handler Model CSAA006UBL00.

MFR: Trane Co

https://images.aaronequipment.com/ItemImages/Compressors/Compressor-Air-Dryer/Quincy-QGD-20_54505001_aa.jpg

Stock No.:

54505001

Used Quincy QCD-20 Rotary Screw Air Compressor System with 120 Gallon Tank, Dryer & Oil Water Separator

Used Quincy QCD-20 Rotary Screw Air Compressor System with 120 Gallon Tank, Dryer & Oil Water Separator. Rated 125 psig. 97.2 CFM. 20 HP, 3/60/460V. With SPVG 120 gallon vertical air receiver Tank; Mikropor Model MK-US-125 Digital 125 SCFM air dryer; and Clean Resources Model IDC Pak Series oil water separator. 32,211 hours. Built 2010.

MFR: Quincy

https://images.aaronequipment.com/ItemImages/Mills/Colloid-Mill/W750H_54653001_aa.jpeg

Stock No.:

54653001

Used Gifford-Wood W750H High Shear Colloid Mill – 20 HP, 3,500 RPM Cart-Mounted Processing System

Used- Gifford-Wood High Shear Colloid Mill, Model W750H. Powered by a 20 HP, 3500 RPM, 3/60/230-460V Pacemaker motor. With control panel. Mounted on cart.

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/Blue-M-POM-371-A-2_52325002_aa.jpg

Stock No.:

52325002

Buy Used Blue M POM-371A-2 Oven – 8.25 Cu Ft, Electrically Heated

Used- Blue M Model POM-371A-2 Oven. 8.25 Cubic feet capacity. Maximum temperature 212 degrees F (100 C). Stainless steel interior, inside dimensions measure 27" wide X 20" high X 24" deep. Electrically heated, rated for 208/240 Volts, Single phase, 60 Hz. B.O.M. NO. E3-00041. Serial# P20-312.

MFR: Blue M

https://images.aaronequipment.com/ItemImages/Filters/Pressure-Leaf/US-Filter_10128057_aa.jpg

Stock No.:

10128057

Used U.S. Filter Auto Jet Self-Cleaning Pressure Leaf Filter – 200 Sq Ft

Used- U.S. Filter Company Auto Jet Self Cleaning (Rotating Leaves) Vertical , Stainless Steel. 200 square foot. Pressure Leaf Filter. Seems to have 100-120 mesh screens. This unit is insulated for chill filtering. It has 16 each 34" rotating leaves vertical mounted filtration screens on a horizontal rotating shaft. Quick opening head. 2.5" and 3.5" Inlet and 6'' diameter discharge. Driven by 1/2 hp a Duty Master Motor 1725 rpm. Requires 230/460 vac 3 ph. The Unit has 68" x 84" overall width and length and 87" overall height.

MFR: US Filter

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Groen-INA-250_10128095_aa.jpg

Stock No.:

10128095

Used Groen Inclined Agitated Kettle, 250 Gallon | Model INA-250 | 316 SS | Jacketed | 5 HP Agitator

Used Groen Inclined Agitated Kettle, 250 Gallon | Model INA-250 | 316 SS | Jacketed | 5 HP Agitator, Vertical. Approximately 54" middle diameter x 45" deep. Full jacket, upper jacket rated 40 PSI, lower jacket rated 100 PSI at 338F. Agitator driven by a 5hp 3/60/208-230/460v 1740 rpm motor. Mounted on 4 carbon steel legs. National Board #104598. Serial #104598.

MFR: Groen

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-0-499-Gal/JBT-Foodtech_10986027_aa.jpg

Stock No.:

10986027

Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer

Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer. Jacket rated 150 PSI at 366 degrees F. 36" straight side x 41" diameter tank dimensions, cone bottom. Scrape agitator. 15 HP SPX product pump. On Mettler Toledo load cells. Mounted on skid Built 2018.

MFR: JBT Foodtech

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Hamilton_11252214_aa.jpg

Stock No.:

11252214

Used Hamilton 200-Gallon Stainless Steel Agitated Kettle – 120 PSI Jacket

Used- Hamilton 200 Gallon Agitated Kettle, stainless steel construction with 3/4 jacket, rated for 120 PSI at 342 degrees F. Features top mounted full sweep agitator, currently less drive. Hinged lid top covers. Hemispherical bottom with 2-1/2" diameter center bottom outlet.

MFR: Hamilton

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer/Werner-and-Pfleiderer-UK17_44974a.jpg

Stock No.:

44974

Used Werner & Pfleiderer UK17 Double Arm Mixer – 200 Gal, Stainless Steel Clad, Jacketed

Used- Werner & Pfleiderer Double Arm Mixer, Model UK17, Stainless Steel Clad 200 Gallon. Sigma tangential blades, jacketed bowl (bottom only) 43" front-back x 53" left-right x approximately 36" deep. Geared both ends. Set up for hydraulic tilt 7.5 hp, 220/440V, 1750 rpm. No base, no drive. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Werner & Pfleiderer

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.