Cosmetics Equipment

Used Apex Type 583 Stainless Steel Double Cone Blender – 2 Cubic Foot (58 Liter) Capacity

Used- Apex Double Cone Blender, Type 583. 2 cubic foot (58 liter) capacity. Stainless steel construction. .5 HP, 115V drive with 19:1 direct drive speed reducer. Previously used for agricultural products.

MFR: Apex

Used WSI 2.2 Meter Extended Gravity Twin Wire Mud Press, Model MM-2200-EXT

Used- WSI 2.2 Meter Extended Gravity Twin Wire Mud Press, Model MM-2200-EXT Gravity. Designed and built to receive pre-processed conditioned" mud sludge flow and remove a major portion of the water (Filtrate) from the mud. The average design flow of the 2.2 meter unit is 250 gallons per minute (gpm). Unit functions to dewater sludge by entrapping a uniform thin layer of conditioned sludge between two endless, porous synthetic belts. The feed box receives conditioned mud sludge flow from the upstream sludge conditioning system and distributes it in a uniform layer over the belt as the belt moves the sludge layer forward from feed box onto the gravity zone. The sludge moving through gravity zone is initially dewatered as gravity pulls the filtrate from the sludge layer through the porous belt to the catchment pan below. The wedge zone entraps the gravity thickened sludge forming a sludge sheet between the two belts. Filtrate (liquid extracted from the sludge) is pressed from the entrapped sludge cake as it traverses the length of the wedge zone to the Doctor blades. Mechanical pressure is applied to the belts to force a major portion filtrate from the sludge as it traverses the machine experiencing ever increasing pressure along its path to the dried sludge discharge point. Dry weight is 35,000 lbs; Serial # WBP-2.2M-25.0-004, New in 2017.

Used Stokes BB2 Rotary Tablet Press – 27 Stations, High-Speed Tablet Production

Used- Stokes Rotary Tablet Press, Model BB2. 27 Stations. Keyed upper punch guides, 3/60/220/440, rated 725-1400 tablets per minute. Maximum 5/8" diameter, maximum 11/16" depth of fill, maximum pressure 2.5 tons.

MFR: Stokes

Used Stokes BB2 Rotary Tablet Press – 27 Stations, 1,400 Tablets/Min

Used- Stokes Model BB2 Rotary Tablet Press. 27 Stations. Rated 725-1400 tablets per minute. Maximum 5/8" diameter, maximum 11/16" depth of fill, maximum pressure 2.5 tons. Keyed upper punch guides. 3/60/220/440 Volt.

MFR: Stokes

Unused APV Crepaco W30/25 Stainless Steel Centrifugal Pump – 155 GPM, 7.5 HP, 2.5" Inlet & 2" Outlet

Unused- APV Crepaco Centrifugal Pump, Stainless Steel, Model W30/25. Approximate 155 gallons per minute, 141 head feet @ 3500 rpm. Approximate 2.5" inlet, 2" outlet. Driven by a 7.5hp, 3/60/230/460 volt, 3520 rpm motor. Serial# H-9344-95.

MFR: APV/Crepaco

Used Glatt 78L Stainless Steel Tote – 20.6 Gallon, 2.7 Cubic Feet

Used- Glatt Tote, 78 Liter (20.6 Gallon), 2.7 Cubic Feet, Stainless Steel. No valve or cover.

MFR: Glatt

Used Patterson-Kelley 20 cu. ft. Stainless Steel Twin Shell “V” Blender | 3 HP Drive | Platform & Safety Fencing | Good Condition

Used Patterson-Kelley 20 cu. ft. Stainless Steel Twin Shell V" Blender | 3 HP Drive | Platform & Safety Fencing | Good Condition. The blender is chain and sprocket driven by 3 hp electric motor. The blender is designed to handle material density of up to 105 lbs/cuft. The two shells measure about 31" diameter x 53" long. This unit is set up for an intensifier bar belt driven by a 5 hp motor. THE BAR ITSELF IS MISSING. There is a 7.5" discharge with a pneumatically operated butterfly valve. Overall dimensions with carbon steel stand are 116" wide x 68" deep x 112" tall. Serial # 234005. This unit comes with fence panels for a safety and a platform with a stairway. The platform is 103" wide x 83" deep x 48.5" tall to the floor. OAD of the platform with stairway are 103" w x 112" long x 91" h. Requires 230/460 vac 3 ph electrial supply. Good condition.

MFR: Patterson Kelley

Used Patterson-Kelley 20 Cu. Ft. Stainless Steel V-Blender – 5 HP Drive with 2 HP Intensifier Bar

Used Patterson-Kelley 20 Cu. Ft. Stainless Steel V-Blender 5 HP Drive with 2 HP Intensifier Bar. Machine rated 65# per cubic foot. On stand with 5 HP, 230/460 volt drive motor and intensifier bar 2 HP motor. (2) 18" loading covers with (1) 8" discharge port with air operated butterfly valve. Last used on starch.

MFR: Patterson Kelley

Used Toshin TDS75-100MF Double Arm Dispersion Mixer – 75L Capacity, 100 HP, Stainless Steel. Chewing Gum.

Used- Toshin Double Arm Dispersion Mixer, Model TDS75-100MF, Stainless Steel. 75 Liter (19.8 gallon) working capacity, 150 liter (39.6 gallon) total. Jacketed bowl approximate 22" left to right x 23" front to back x approximately 20" deep rated 213 maximum psi at 302 degrees F. Cored masticator blades, front rotor 27 rpm, rear rotor 23 rpm, geared one end, top air operated pressure cap, air operated dust hood, motorized bowl screw tilt with a 2.2kw motor. Mixer driven by a 75kw (100hp), 3/60/480 volt, 1760 rpm motor thru a reducer no ratio. Includes an operator panel and control panel. Mounted on a base. Serial # 916. For Chewing Gum.

MFR: Toshin

Used Toshin Co. Double Arm Mixer / Hybrid Kneader - Dispersion Mixer – 75L, 100 HP, Stainless Steel. Chewing Gum.

Used- Toshin Model TDS75-100MF Double Arm Dispersion Mixer, Stainless Steel. 75 Liter (19.8 gallon) working capacity, 150 liter (39.6 gallon) total. Jacketed bowl approximate 22" left to right x 23" front to back x approximately 20" deep rated 213 maximum psi at 302 degrees F. Cored masticator blades, front 27 rpm, rear 23 rpm, geared one end, top air operated pressure cap, air operated dust hood, motorized bowl screw tilt with a 2.2kw motor. Mixer driven by a 75 kw (100 hp), 3/60/480 volt, 1760 rpm motor thru a reducer ratio 20.272 to 1. Includes an operator panel and control panel. Mounted on a base. Serial # 1298. For Chewing Gum.

MFR: Toshin

Used CB Mills Batchranger Disperser – 20 HP, Air Tilt, Hoist Mounted

Used- CB Mills Batchranger Stand-Alone Hoist Mounted Disperser, Model FDD-611. Air operated tilt. Enclosed shear grid/stator and high pressure impeller. Driven by a 20hp, 3/60/230/460 volt, 1755 rpm xp motor. Mounted on painted carbon steel hoist. Serial# 2985-0000.

Used Lowe Industries C-20 Heavy-Duty 316 Stainless Steel Ribbon Blender – 20 Cubic Foot Cosmetic & Industrial Blender

Used Lowe Industries C-20 Heavy-Duty 316 Stainless Steel Ribbon Blender 20 Cubic Foot Cosmetic & Industrial Blender. Trough measures 60" long X 27' wide X 27" deep. Rotation is CCW. Serial# 787. Center discharge. Mounted on stainless steel structure with side catwalk. Built in 1992. Previously used in cosmetics.

MFR: Lowe