Cosmetics Equipment

Used JV Northwest 1,300-Gallon Single-Wall Tank – 316 Stainless Steel

Used- JV Northwest Single-Wall Tank, 1,300-gallon. Constructed of 316 stainless steel. 78" diameter x 60" straight side; flat top, dish bottom design; Bottom head includes a 2" diameter center bottom outlet; Top ports include (1) 2" diameter tri-clamp fitting; Tank is mounted on (4) stainless steel legs and includes a bridge mount for agitation or other top-mounted equipment; Shell Thickness: 2.3mm/0.090 inches. Previously used in cosmetics applications.

MFR: JV Northwest

Used – 50 Ton Horizontal Liquid Carbonic CO2 Tank – Bulk Cryogenic Storage

Used 50 Ton Horizontal Liquid Carbonic CO2 Tank Bulk Cryogenic Storage. SA-516-70 Shell & Heads. 78" diameter x 598" Straight Side. MAWP: 360psi at -20 to 650 degrees F. 15" diameter manway. Product: Carbon Dioxide. National Board# 4230, Serial# 59980, Built 1978.

MFR: Liquid Carbonics

Used Approx. 13,000 Gallon Pittsburgh Tank Corporation Carbon Steel Vertical Mix Tank

Used- Approx. 13,000 Gallon Pittsburgh Tank Corporation Carbon Steel Vertical Mix Tank. Flat top and bottom. 11-6" diameter X 17 high straight side. Has side bottom manway. Has (4) internal baffles. Has stainless steel (4) blade agitator, driven through Chemineer Drive. Insulated and covered with sheathing. Includes ladder with safety cage and top handrail.

MFR: Pittsburgh-Des Moines

Used Winkworth ZX500-6 Z-Blade Mixer-Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units

Used Winkworth ZX500-6 Z-Blade Mixer/Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units. 500 liter (132Gal) working capacity with a 778 liter total capacity (product dependent). 304 stainless steel chamber measures approx. 1,090mm long x 956mm wide x 735mm deep. Unit has vacuum rated domed hood/lid. 304 stainless steel external jacket. Each Z-blade driven by 30kw (40hp) motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Motors are dual rated 50/60 Hz. Blade Bowl Clearance Straight side 3mm , End 4mm. Cooling Jacket Design Pressure Min Atmos Max 3.5 bar.G Design Temp Min 10C Max 250C Test Pressure 6.7 bar.G Design & Manufacturing Code SEP (Sound Engineering Practise). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Winkworth

Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom

Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom. 13,200 gallon/50 cubic meter capacity. 9'3" diameter x 36' overall height. 24" x 36" side manway. 8" center bottom outlet port. 6" internal feed line. Cone bottom. With removable caged ladder. On (4) leg frame.

MFR: ER

IN STOCK AND NEW- Paul O. Abbe Model RB-135 Ribbon Blender.

NEW & IN STOCK- Paul O. Abbe Model RB-135 Ribbon Blender. In -Stock .135 Cubic Foot working capacity. 146 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 49.6" wide x 105.5" long x 53.6" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 40 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 33 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 8" discharge height. Approximate weight 7,920 pounds. Approximate overall dimensions: 64.8" wide x 158.3" long x 84.7" high. Controls are available upon request.

MFR: Paul O Abbe

J.H. Day 135 Cu Ft Ribbon Blender, Stainless Steel, (2) Bag Dump Stations, XP Motor

Used J.H. Day stainless steel double spiral ribbon blender with approximate 135 cu ft capacity. Equipped with top cover, (2) bag dump stations, 30 HP explosion-proof motor and reducer, and center bottom outlet with valve. Serial #85051.

Used Cummins DQGAB 1500 kW Diesel Generator – Tier 2, PMG, Sound Enclosure, UL2085 Fuel Tank

Used-1500 kW standby (1350 kW prime) Cummins diesel generator set model DQGAB, SN-G110233080. Cummins QSK50-G4 engine rated 2220 HP at 1800 RPM, SN-25366503, EPA Tier 2 emissions. 3/60/277/480V, 12 lead reconnectable to other voltages. 2500 Amp main-line circuit breaker. PMG - Permanent magnet generator. Oversized generator end rated 1612 kW. UL 2200 listed package. Engine cooling high ambient air temperature. PowerCommand digital control panel. Battery charger. Coolant heater. Sound attenuated enclosure. 5181 gallon UL2085 listed sub-base fuel tank with secondary containment. 770 Hrs. Year 2011. Passed load test 1/3/2025. Overall dimensions enclosure with genset 150W x 397L x 153H, 51,000 lbs, fuel tank 144W x 397L x 37H 25,389 lbs.

MFR: Cummins

Used Teledyne Readco Continuous Compounder Processor – 28" x 97" Barrel, 125 HP Motor

Used- Teledyne Readco Continuous Compounder Processor. Size approximately 28" diameter x 97" long barrel, Each screw is approx. 14" Diameter. stainless steel contact parts, non-jacketed. 15" x 26" feed section. 6" x 26" discharge section driven by a 125 HP Westinghouse electric motor 3/60/230/460 Volt, 1780 RPM, Dodge TXM gearbox ratio 20.55:1, final output 85 RPM. Includes a removable top cover.

MFR: Teledyne Readco

Used Motan 14 m³ Stainless Steel Mixing Silo System – Complete with Paul Groth Elevator, FAS Conveyors & Blowers

Used- Moton Mixing Silo, 14 m3 volume. Stainless steel, on 4 legs, bottom canter product discharge, control panel. Incl. (1) Paul Groth elevator, type BE 180. (1) Air blower, (1) FAS feeding & discharging conveyers, (1) Blower, piping and additional infrastructure.

Used 14,000 Gallon 316L Stainless Steel Vertical Tank – Erected Steel Products, API-650, Built 2012

Used-14,000 gallon Erected Steel Products 316L Stainless Steel Vertical Tank. 13' diameter X 15' high straight side. Rated ATMOS @ 20 to 160 F. S/N 1168. API-650 standard. Slight cone top, flat bottom with ramped side opposite where agitator was mounted (agitator no longer available). Top fittings: 20" manway, (1) 6" vent, and (1) 12". 24" side bottom manway, (1) 2" (1) 3", (1) 6", (3) 8", (3) 10" and (1) 12" side top inlets (2) 8" side bottom outlets. Built 2012.

Used 14,000 Gallon 316L Stainless Steel Vertical Tank – Erected Steel Products, API-650, Agitated, Built 2012

Used-14,000 gallon Erected Steel Products 316L Stainless Steel Vertical Tank. 13' diameter X 15' high straight side. Rated ATMOS @ 20 to 160 F. S/N 1169. API-650 standard. Slight cone top, flat bottom with ramped side opposite where the agitator was mounted (agitator no longer available). Top fittings: 20" manway, and (1) 6" vent. 24" side bottom manway. (1) 12" and (1) 24" side top inlets. (1) 6" , (1) 8", and (1) 10" side inlets. (1) 2.5", (2) 8", (1) 3", and (1)4" side bottom outlets. Built 2012.