Cosmetics Equipment
Stock No.:
53143002Unused Andritz Industrial Rotary Triple Pass Dryer – 10' x 30' Horizontal System
Unused- Andritz Industrial Rotary Triple Pass Dryer, Horizontal. First pass is 304 Stainless Steel, Second and third pass are carbon steel. Approximate 10' diameter x 30' long. Never installed. With running gear and trunnions. Requires the following: Heat source, Belt drive, Gearbox, and motor. These are not included. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Andritz
Stock No.:
54296016Used Feldmeier 1,200 Gallon Stainless Steel Tank – Vertical Cone Bottom Vessel w
Used- Feldmeier Stainless Steel Tank, Approximate 1,200 Gallon Capacity, Vertical. Approximately 58" diameter x 96" straight side. Dished top, coned bottom. Openings top: 18" manway with cover, 4", 3", (3) 2", Side: (2) 2". Bottom: 3", 1", 4" Center bottom outlet with approximately 25" discharge height. Mounted on (4) stainless steel legs. Serial# E-572-04.
MFR: Feldmeier
Stock No.:
11059407Used Alloy Fab 12,000-Gallon 304 Stainless Steel Mix Tank – 7.5 HP Agitator & Internal Heating Coils
Used Alloy Fab 12,000-Gallon 304 Stainless Steel Mix Tank 7.5 HP Agitator & Internal Heating Coils. Approximately 12' diameter x 15'8'' height, 216'' overall height. 304 Stainless steel. Flat top and bottom. Includes 7.5 HP top entering agitator. Tank has (2) loops of 2'' internal heating coils. Top ports include (1) 8'' 150lb flange, (3) 1.5'' threaded, (2) 3'' threaded, (1) 3'' vent pipe. Side ports include 19'' manway, (1) 2'' threaded, (2) 3'' threaded, (1) 1'' threaded, (2) 1/2'' threaded, and (2) 150lb flange inlet/outlets.
MFR: Alloy Fab
Stock No.:
40425063Used DCI 12,000 Gallon 304 Stainless Steel Storage Tank | Jacketed | Cone Bottom | Skirt Mounted | Built 1997
Used DCI 12,000 Gallon 304 Stainless Steel Storage Tank | Jacketed | Cone Bottom | Skirt Mounted | Built 1997. Approx. 132" inner diameter x 185" straight side, dish top, 41" deep cone bottom, (3) 28" high side jackets, (1) bottom jacket rated 150 psi at 100 f, 16" x 20" side manway, skirt mounted, approximately 333" OAH, SN 97D-56284. Built 1997.
MFR: DCI
Stock No.:
50800035Used A&B Process 12,000 Gallon Jacketed Vertical Mix Tank – 304L Stainless Steel (2019)
Used- A&B Process 12,000 Gallon Jacketed Vertical Mix Tank. Vessel rated 45 psi/FV @200 deg f. Jacket rated 100 PSI @ 200 deg F. Bottom scrape with turbine agitator. 304L stainless steel. Has spray balls. 2" fittings. 3 HP mixer. Built 2019.
MFR: A & B
Stock No.:
10151642Used Patterson-Kelley 125 Cu. Ft. Stainless Steel Twin Shell V-Blender – Dual 15 HP Drives with Intensifier Bar
Used Patterson-Kelley 125 Cu. Ft. Stainless Steel Twin Shell V-Blender Dual 15 HP Drives with Intensifier Bar. Rated for a maximum material density of 65 lbs. per cubic foot. Equipped with intensifier bar. Blender driven by a 15 HP motor with intensifier bar driven by an additional 15 HP motor. Unit is mounted on stands. Model: Twin Shell Dry Blender. Serial Number: 229056.
MFR: Patterson Kelley
Stock No.:
11059371American Process Systems FPB-125 Fluidized Paddle Blender with Choppers – 125 cu ft, 304 SS, Jacketed (Used)
Used- American Process Systems FPB-125 Fluidized Paddle Blender with Choppers 125 cu ft, 304 SS, Jacketed. Jacket rated 125 PSI @ 350 Degrees F / -20 Degrees F. Main shaft driven by 50 HP, 1775 RPMi / 49 RPMo, 230/460 V. Has (8) choppers, (4) on each side, 15 HP, 3530 RPM, 208-230/460V. Control Panel included. Jacket passed hydrotest.
MFR: American Process Systems
Stock No.:
11690032Used Bush 125 Cubic Foot Stainless Steel V Blender | Industrial Sanitary Powder Blender
Used Bush 125 Cubic Foot Stainless Steel V Blender | Industrial Sanitary Powder Blender. This unit includes a manual Cora sanitary style 12" butterfly valve. Main painted steel support frames with extension stands, dual SS clamp type charge covers, shell driven by 10 HP motor/gear/gearbox arrangement, with electrical control panel/HMI with shell timer and VFD, with partial side loading platform.
Stock No.:
14195008Used Gemini 125 HPSS CNG Gas Compressor – 4 Stage, 300 CFM, 125 HP, Complete System with Cascade, Dryer, Dispensers
Used- Gemini Gas Compressor, Model 125 HPSS, 4 Stage 300 CFM. CNG (Compressed Natural Gas) compressor system includes a four-stage, water-cooled, reciprocating compressor designed for efficient gas compression up to high pressures. U.S. Motors 125 HP, 1760 RPM, 460 Volt motor (S/N X783119) and includes an MK-AJ 24" recapture tank (S/N 9605). It is equipped with an EI C36-0527 cooler (S/N 93483) and a three-cylinder ASME cascade system, each cylinder measuring 20" x 11'6", rated for 5,000 psig and 5,711 cu. ft., with serial numbers 43338, 43339, and 43340. The unit utilizes a Marcum 11 Valve Electro-Pneumatic PMV/SMV priority/sequence panel for flow control. Compression is handled by a Quincy F340-80 air compressor rated at 7.5 HP, 460 Volt, with a discharge aftercooler (S/N 6019514). Drying is managed by a Wilkerson DE3 Twin Tower Heatless Dryer housed in a NEMA 4 enclosure (S/N 4339311). Fuel dispensing is facilitated by two DVCO 2020D dispensers with Hansen nozzles, serial numbers 930034 and 930037.and includes an air-cooled aftercooler, inter-stage separators, and safety relief valves on all stages. The compressor is skid-mounted with an integrated control panel for monitoring and automation, and it is designed for continuous-duty operation. Suitable for vehicle fueling stations or industrial applications, the unit ensures reliable performance with built-in protection systems.
MFR: Gemini
Stock No.:
52718001Used Atlas Copco Air Compressor & Dryer System – ZE4-B & FD 1250 VSD
Used 2013 Atlas Copco oil-free rotary screw compressor and VSD dryer package with approximately 5,000 total operating hours, complete with filtration and modern controls. Consists of an Atlas Copco Model ZE4-B Low Pressure Oil-Free Rotary Screw Compressor rated at ~876 CFM, driven by a 125hp 3/60/440-460v 3560rpm air-cooled motor, 33 psig max working pressure, with Elektronikon GraphicPlus HMI and Siemens Sinamics drive (S/N APF185963); an Atlas Copco FD 1250 VSD Refrigerated Air Dryer rated at 2,646.25 CFM, 11.8kW, R404a refrigerant with Elektronikon HMI controls (S/N APF185022); and (2) Atlas Copco DD 1400FF inline air filters with housings (S/N APF185422/423). Oil-free screw technology with refrigerated drying and inline filtration makes this package well-suited to clean-air applications in pharma, food and beverage, electronics, and any process where oil carryover is unacceptable. Turnkey, ready-to-integrate compressed-air solution rather than a bare machine. System reported in excellent working condition; documentation available, photos and inspection recommended.
MFR: Atlas Copco
Stock No.:
54293003Used 1,250 Gallon 304 Stainless Steel Vertical Mix Tank – Dual Turbine Agitator,
Used 1,250 Gallon 304 Stainless Steel Vertical Mix Tank. Approximate 98" diameter x 42" straight side. Flat top, slight dish bottom. Top agitator bridge with a Chemineer 2-tier 3-turbine agitator. Driven by a 1hp, 3/60/230/460 volt, 1160rpm gear motor. Openings Top: (2) 12" manways, 1-1/2". Approximately 3" center bottom outlet. (4) internal mounted baffles. Mounted on (4) Stainless Steel Legs. No Manufacturers Tag.
