Cosmetics Equipment

Clear
https://images.aaronequipment.com/ItemImages/Mixers/Likwifier/Letsch_10151481_aa.jpg

Stock No.:

10151481

Used Letsch 250 Gallon Stainless Steel Pressure Vessel / Likwifier – 316L, Jacketed, Cone Bottom, Portable

Used- Letsch Corporation Stainless Steel Pressure Vessel/Likwifier, Approximately 250 Gallon. 316L stainless steel; Jacket pressure: 32 psi @ 400F; Dish top, cone bottom; Portable, mounted on stainless steel legs on wheels; Dimensions: 48" dia. x 31" straight side; National Board: 854; Serial #: 5385; Built 1983.

MFR: Letsch

https://images.aaronequipment.com/ItemImages/Pumps/Vacuum-Pumps/Leybold-DK50_43567011_a.jpg

Stock No.:

43567011

Used Leybold-Heraeus DK50 Rotary Piston Vacuum Pump – 2 HP, Oil-Sealed, 25mm Inlet

Used- Leybold-Heraeus Rotary Piston, Oil Seal Vacuum Pump, Model DK50. 25 mm Inlet, 38 mm outlet. Driven by a 1.5 kw (2 hp), 3/50/500 volt, 1410 rpm motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Leybold

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Complete-Packaging-Line-Cosmetic/Lieder-RCC-1_72844001_aa.jpg

Stock No.:

72844001

Lieder RCC-1 Jar Filling & Capping Line – 15ml to 550ml Cosmetic Packaging Equipment

Used Lieder Maschinenbau GmbH Cosmetic Jar Filler/Line, type RCC-1. Capable of speeds from 20 up to 55 jars per minute. Filling range 15 ml-550 ml. Incl. (1) Capper, (1) Cap elevator/vibration bowl, type DSV 1200, (2) Rotary turn tables (1) Automatic CIP washing system. Incl. Electrical cabinets, pumps, sensors, valves and additional infrastructure. New year 2005.

MFR: Lieder

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Coders-Printers-Thermal-Hot-Stamp/H320_72974001_aa.jpg

Stock No.:

72974001

Industrial Hot Foil Printing Machine – Link Label H320 for Labels & Packaging

Used- Link Label Hot Foil Stamping Machine, Type H320. Speed 250 prints/minute (depending on the motive). Max. print width 11.7" (300 mm), Max. print length 11.7" (300 mm). Set of 2.92" (75 mm) friction shafts. Film transport. Servo drive incl. motor(s). Controls. Built 2016. Previous used in a contract label printing application.

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Case-Sealers-Tapers/Little-David-LDX-RTB_72988001_aa.jpg

Stock No.:

72988001

Buy Pre-Owned Little David LDX-RTB 3.0 Case Taper with 3” Tape Head

Used- Little David LDX-RTB 3.0 Random Top and Bottom Case Sealer/Taper. Capable of speeds up to 185' per minute. Set up with 3" wide tape. Case size range: 6" - infinite (length) x 5-1/2" - 26" (width) x 3-1/2" - 24.5" (depth). 1/60/115.

MFR: Little David

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Case-Erectors-Tape-Bottom-Seal/Little-David-CF-25SB_73452001_aa.jpg

Stock No.:

73452001

Used Little David CF25SB Narrow Width Case Erector & Bottom Taper – 15 CPM, AB Controls, Like New

Used Little David CF25SB Narrow Width Case Erector & Bottom Taper 15 CPM, AB Controls, Like New. Capable of 15 cases per minute. Case size range: (Length) 6"-16" x (Width) 3-1/2" - 14" x (Height) 4"-12". Allen-Bradley PLC controls. Tape Specifications: Any commercially acceptable brand of pressure sensitive tape. Width: 3"Tape Roll Diameter: 15" 3(81mm) maximum on a 3" (76mm) core Roll Length: up to 2000 yards (1829m) Machine has been minimally used and is in like-new condition. Requires 80 PSI.

MFR: Little David

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Case-Sealers-Tapers/Little-David-16A_73452002_aa.jpg

Stock No.:

73452002

Used Signode LD16A Top-Only Case Sealer – 14 CPM, Auto Flap Closer, 115V

Used Signode LD16A Top-Only Case Sealer 14 CPM, Auto Flap Closer, 115V. Capable of speeds up to 60 feet per minute or 14 cases per minute. Case size range: length 8-1/2" to 24", width 4-1/2" to 20", height 4-1/2" to 20". Has automatic indexing, automatic flap closer. Uses pressure sensitive tape with widths of 1-1/2" or 2". Maximum roll diameter up to 15". Power Requirements: 115 volts / single phase / 60 cycle. Air Requirements: 0.10 CF free air / cycle at 75 psi. Driven by a 1/3 hp, 1/60/115/208-230 volt.

MFR: Little David

https://images.aaronequipment.com/ItemImages/Boilers/Fire-Tube/FBN-1001_54419001_aa.jpg

Stock No.:

54419001

Used Lochinvar Crest FBN1001 Condensing Boiler – 1,000,000 BTU High-Efficiency Natural Gas Heating System

Used- Lochinvar Crest Condensing Boiler, Model FBN 1001. Natural gas fueled. 114.7 square feet of heating surface. 999,999 BTU/hr max input, 960,000 output. 160 psi max allowable working pressure. 210 degrees F max water temperature. 1 phase/60 Hz/120V. National Board #323810, built 2018. Overall dimensions: 30'' Width x 56.5'' Length x 78'' Tall.

https://images.aaronequipment.com/ItemImages/Boilers/Fire-Tube/FBN-1001_54521001_aa.jpg

Stock No.:

54521001

Used Lochinvar Crest Condensing Boiler Model FBN1001 – Natural Gas High-Efficiency Boiler

Used Lochinvar Crest Condensing Boiler Model FBN1001 Natural Gas High-Efficiency Boiler. 960,000 btu/hr maximum output, 1,000,000 btu/hr maximum input. Fueled by natural gas. 97 square feet of heating surface. Certified 160 psi at 210 degrees F. 1/60/120V. National Board # 174312, Serial# 3115101830529.

https://images.aaronequipment.com/ItemImages/Boilers/Fire-Tube/FBN-1001_54521002_aa.jpg

Stock No.:

54521002

Lochinvar Crest FBN1001 High-Efficiency Natural Gas Condensing Boiler for Commercial and Industrial Heating Applications

Lochinvar Crest FBN1001 High-Efficiency Natural Gas Condensing Boiler for Commercial and Industrial Heating Applications. 960,000 btu/hr maximum output, 1,000,000 btu/hr maximum input. Fueled by natural gas. 97 square feet of heating surface. Certified 160 psi at 210 degrees F. 1/60/120V. National Board # 150398, Serial# 3115101830525.

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Metal-Detectors-Tablet-Capsule/Lock-Met30_72834003_aa.jpg

Stock No.:

72834003

Used Lock MET 30+ Metal Detector – 3.75" x 1" Aperture

Used- Lock Inspection Systems LTD Metal Detector, Model MET 30+. Aperature approximately 3.75" wide x 1" tall opening. Mounted on casters. 1/60/115 volt, 0.2 amp.

MFR: Lock

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Metal-Detectors-Conveyor-Mounted/Lock-Inspection-MET_72828001_aa.jpeg

Stock No.:

72828001

Pre-Owned MET 30+ Conveyor Metal Detector – Lock Inspection Systems, 1/60/110V

Used- Lock Inspection Systems Metal Detector, Model MET 30+. Aperture size 3-1/2" x 14". Stainless steel construction & mounted on conveyor with casters. Last used in conjunction with vertical form fill and seal system. 1/60/110V.

MFR: Lock Inspection

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.