Contract Pharmaceutical Equipment
Stock No.:
53587001Unused Tarmac Int. Inc. Heat Exchanger – 768 Sq. Ft., 1.8 MMBTU/H, Stainless Steel
Unused- Tarmac Int. Inc Heat Exchanger, (Never set up on the Hot side). Model 48-30DPL48-0.625-IU. 768 sqft. Stainless steel. Size: 48"*48"*54.25, CFM: 8100 CFM. Material: High temperature SST, Surface area: 768 Ft square. Total heat transfer rate: 1.8 MMBTU/Hour. Type: Plate/plate heat exchanger. Max Temp Hot Gas Inlet: 662 F. Efficient: 64.3%. Suitable to handle particulate gases from solid combustion and also applicable in clean combustion Outlet temp hot side: 249F , 11 GA. 304 S.S. casing with 18 GA. 304 S.S. expansion joints at 3 connections, 12 Ga. C.S. cladding with 3 x 3 x C S flanges primed and painted. STRUCTURAL STAND EQUAL TO OR LESS THAN 5 HEAT EXCHANGER ELEVATION. Year 2021. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
53267147Used Smithco Model 1F30-111-2 Four-Bundle Fin-Fan Cooler Package – Natural Gas & Lube Oil Air-Cooled Heat Exchanger System
Used Smithco Model 1F30-111-2 Four-Bundle Fin-Fan Cooler Package Natural Gas & Lube Oil Air-Cooled Heat Exchanger System. S/N 108432-B. Overall dimensions are 31.5' long X 11.1' wide X 12.67' tall. Unit consists of (2) lube oil coolers, Natural gas cooler #1 and Natural gas cooler #2. Lube cooler 1 has 3" 300# inlet and outlet and (98) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 330 PSIG @ -20 to 350 F. Bare Sq ft. 770.3, Extended Sq Ft. 16,310. Natural gas cooler CLR-1 has 6" 300# inlet and outlet and (34) 1.25" 304 tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 300 PSIG @ -20 to 350F. Bare Sq ft. 334, Extended Sq Ft. 6,542. Lube cooler 2 has 2" 300# inlet and outlet and (54) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 450 PSIG @ -20 to 350 F. Bare Sq. ft. 424.4 Extended Sq ft 8,986. Natural gas cooler CLR-2 has 4" 300# inlet and outlet and (26) 1.25" 304 stainless steel tubes configured in 4 rows 2 pass 30' long. Fin type L-tension aluminum. Rated -20 to 350 F. Bare Sq ft. 255.4, Extended Sq. ft. 5,003. Unit has (2) 20HP COFIMCO model 49 5000 fans 10' diameter consisting of (5) aluminum blades with adjustable pitch and 10 degree angle. Motors are 3/60/460 volt. Fans driven by belt driven speed reducer. Rated 122,800 ACFM. Galvanized structure. Built 2010, Weight 22,800#.
MFR: Smithco Engineering
Stock No.:
53267156Smithco Four-Bundle Air-Cooled Heat Exchanger Package for Natural Gas Compression and Lube Oil Cooling Operations
Smithco Four-Bundle Air-Cooled Heat Exchanger Package for Natural Gas Compression and Lube Oil Cooling Operations. S/N 108432-B. Overall dimensions are 31.5' long X 11.1' wide X 12.67' tall. Unit consists of (2) lube oil coolers, Natural gas cooler #1 and Natural gas cooler #2. Lube cooler 1 has 3" 300# inlet and outlet and (98) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 330 PSIG @ -20 to 350 F. Bare Sq ft. 770.3, Extended Sq Ft. 16,310. Natural gas cooler CLR-1 has 6" 300# inlet and outlet and (34) 1.25" 304 tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 300 PSIG @ -20 to 350F. Bare Sq ft. 334, Extended Sq Ft. 6,542. Lube cooler 2 has 2" 300# inlet and outlet and (54) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 450 PSIG @ -20 to 350 F. Bare Sq. ft. 424.4 Extended Sq ft 8,986. Natural gas cooler CLR-2 has 4" 300# inlet and outlet and (26) 1.25" 304 stainless steel tubes configured in 4 rows 2 pass 30' long. Fin type L-tension aluminum. Rated -20 to 350 F. Bare Sq ft. 255.4, Extended Sq. ft. 5,003. Unit has (2) 20HP COFIMCO model 49 5000 fans 10' diameter consisting of (5) aluminum blades with adjustable pitch and 10 degree angle. Motors are 3/60/460 volt. Fans driven by belt driven speed reducer. Rated 122,800 ACFM. Galvanized structure. Built 2010, Weight 22,800#.
MFR: Smithco Engineering
Stock No.:
54234016Used Xylem Shell & Tube Heat Exchanger – 150 PSI Pressure Rating, Built 2018
Used 2018 Xylem horizontal U-tube heat exchanger with approximately 78 square feet of heat transfer surface. Unit has (22) 304 stainless steel 3/4" diameter tubes and an approximately 8" diameter x 108" long carbon steel shell with sheathing. Shell and tubes are rated for 150 psi at -20 to 375 F. Connections include (2) 2" shell openings, (2) 2" tube openings, 3/4" vent, and (2) 1/2" drains. Serial number 285806-03, National Board number 314565. Overall dimensions are approximately 118" x 54" x 34" tall. Possible applications and suitable products include industrial heating, cooling, heat recovery, and liquid-to-liquid heat transfer service for compatible process fluids.
Stock No.:
11252142Used Precision Stainless 316L Stainless Steel Reactor, 300 liter (79 gallon) Capacity
Used- Precision Stainless 316L Stainless Steel Reactor, 300 liter (79 gallon) Capacity. Pharmaceutical grade fermentation vessel. Internally rated for 50 PSI / Full Vacuum at 300 degrees Fahrenheit to minus 20 degrees Fahrenheit. Complete with dimpled jacket, rated for 100 PSI at 300 degrees Fahrenheit to minus 20 degrees Fahrenheit. Bottom head includes 1-1/2" center bottom outlet with tri-clamp fitting. Top head includes (2) 3", (4) 2" & (1) 1-1/2" ports. Previously used in pharmaceutical operation.
MFR: Precision Stainless
Stock No.:
11252144Used Precision Stainless 300L 316L Stainless Steel Reactor – Pharma-Grade
Used- Precision Stainless 316L Stainless Steel Reactor, 300 liter (79 gallon), pharmaceutical grade fermentation vessel. Internally rated for 50 PSI / Full Vacuum at 300 degrees Fahrenheit to minus 20 degrees Fahrenheit. Complete with dimpled jacket, rated for 100 PSI at 300 degrees Fahrenheit to minus 20 degrees Fahrenheit. Vessel measures 24-1/2" Outside diameter x 3'7" high, top head is removable. Bottom head includes 1-1/2" center bottom outlet with tri-clamp fitting. Top head includes (2) 3", (4) 2" & (1) 1-1/2" ports. Previously used in pharmaceutical operation.
MFR: Precision Stainless
Stock No.:
51258012Used SPX Marley NC8409U Crossflow Cooling Tower – 790 Ton/Cell | 2018 Build | 4-Cell Industrial System
Used SPX Marley NC8409U crossflow cooling tower system featuring a 4-cell industrial configuration with an approximate combined cooling capacity of 790 tons. Each cell is rated for approximately 1,650 GPM, providing a total system flow of 6,600 GPM. Designed for cooling water from 109.0 F hot water temperature to 85.0 F cold water temperature with a 76.0 F entering wet bulb temperature. Each cell is equipped with a 12' diameter, 5-blade fan driven by a 50 HP motor operating at 1,800 RPM with 60 Hz, 230/460V electrical service. Built in 2018.
MFR: SPX
Stock No.:
11059391Used DCI 3,000L (792 Gallon) Sanitary Stainless Steel Jacketed Reactor/Fermenter – 30 PSI / FV with Agitator
Used- DCI 3000L (792 Gallon) Sanitary Stainless Steel Jacketed Reactor/Fermenter Vessel. Internal Rated 30/FV (Full Vacuum) PSI @ 300 degrees F. Jacket Rated 100 PSI @ 300 degrees F. 11 Gallon jacket volume. Equipped with Mixer / Agitator.
MFR: DCI
Stock No.:
10151512Used Rosenmund 8 Square Meter Nutsche Filter – 304 Stainless Steel, Liquid Discharge
Used- Rosenmund 8 Square Meter Nutsche Filter, 304 Stainless Steel. Liquid discharge. 304 stainless steel shell, jacket, and internal. Shell rated 50 psi/FV at 370 degrees F. Half pipe and bottom plate jacket rated 150 psi/FV at 370 degrees F. Base rated 150 psi/FV at 370 degrees F. 20 hp main drive; hydraulic pack. Built 1991.
MFR: Rosenmund
Stock No.:
47147030Used Buhler DFMF-2-P-RF Stainless Steel Plow Mixer with HMI Controls – 12.8 Cu. Ft. Capacity
Used- Buhler Model DFMF-2-P-RF Stainless Steel Plow Mixer. Designed for efficient blending and mixing applications. The unit has an approximate full capacity of 12.8 cubic feet and a working capacity of approximately 8.5 cubic feet. Constructed of stainless steel, the mixer is non-jacketed and features a hinged cover equipped with grid safety bars for operator protection. Mixer includes an infeed opening measuring 38" long by 5.5" wide and a discharge gate measuring 41" long by 5.25" wide. The discharge height is approximately 48", the infeed height is approximately 80". The unit is powered by a 3.6 kW (4.9 HP), 480-volt, 3-phase, 60 Hz motor, and is supplied with a control panel featuring an HMI for user-friendly operation and process monitoring. Serial # 10335419, Built 2003. The mixer occupies an approximate footprint of 5' by 10', making it suitable for a variety of production environments requiring reliable and consistent mixing performance.
MFR: Buhler Inc.
