Contract Pharmaceutical Equipment

Used Charlotte SD-40 Stainless Steel Inline Colloid Mill | 40 HP High Shear Milling System

Used Charlotte SD-40 Stainless Steel Inline Colloid Mill | 40 HP High Shear Milling System. On a common stainless steel base with 40 hp, 230/460 vac, 3 phase, 60 cycle, 3,565 rpm motor. Designed for pumpable slurry products. Rated up to 1,200 gallons per hour, depending on the product being processed. Equipped with 3" OD / 2"ID treaded fittings and an adjustable gap rotor. Partial reduction down to 3-5 microns depending on materials, application and machine configuration. Last used in the food industry. Serial number 4211. This unit includes a motor starter.

MFR: Charlotte

Used Korsch PH 106/DMS Rotary Tablet Press – 6 Station, 40 KN, 32,400 Tablets/Hour

Used- Korsch Rotary Tablet Press, Model PH 106/DMS, 6 station, 40 KN compression pressure, 15 mm max tablet diameter, 15 mm max depth of fill, rated up to 32,400 tablets/hour, machine #1.0037.95.

MFR: Korsch

Used Ross HSM-40 Vacuum Double Helical Mixer Reactor – Stainless, Jacketed, Explosion-Proof

used- Ross HSM-40 Vacuum Double Helical Mixer Reactor, 316 stainless steel. This unit will mix most things that a double planetary mixer will mix, and in many cases, better and faster. Unit has air/oil lift mechanism to raise and lower the drive to allow the removal of the mix tank. Designed for operations under vacuum & a positive pressure of 35 psi @ 350f, jacket maximum allowable working pressure 100 psi @ 350f. Minimum design metal temperature 0f at 100 psi.7.5hp motor. ross metal fabricators Serial# 11801-1, National Board# 463, CRN 15925. stainless steel contact parts. jacketed mix can with provision for thermocouple, insulated with sheathing. explosion proof motor runs on 575 volts, 3 phase, 60 hz. no controls. mixer dimensions for the ross hsm-40: 43" w x 68" l x 91" h lowered position tank id is about 23 and about 27.5 deep. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Ross Industries

Used Ross HDM-40 Gallon Double Planetary Mixer – Vacuum Rated, 316SS, 15 HP (Approx.)

Used- Ross HDM-40 Gallon Double Planetary Mixer. 5 to 40-gallon working capacity. Designed to mix under a full vacuum 29-1/2" HG. An air over oil hydraulic lift system is included to raise and lower the top of the mixer with drives and mixing blades. All product contact parts 316SS with a 150-grit finish and exterior stainless with an 80-grit finish. Driven by a 15 HP (to be confirmed) motor with a mechanical variable speed drive. All carbon steel surfaces are painted with a two component epoxy. Fitted with standard rectangular profile mixing blades.Comes with a control panel suitable for 3 PH / 60HZ /480v. Vacuum hood has a 2" sight port, a light fixture, a vacuum exhaust port and a port with 80 Watts / 120 volts EX-PROOF light. Mixer comes with one mix (not jacketed) can as follows: Made from 316 SS with interior finish 150-grit and exterior finish 80-grit, internally machined for use with a discharge press, designed for vacuum mixing, bottom outlet is a 4" Tri-Clover 316L SS flush plug connection with a 4" flush plug, mounted on casters, push pull handle. Prior use for manufacturing oral care products. Approximate weight of the mixer is 6234 Lbs. Manufactured in 2003.

MFR: Ross Industries

Used Gifford-Wood Model V/P-A AGI-Mixer – 40 Gallon Vacuum Kettle, Homogenizer Mixer, Stainless Steel

Used- Gifford-Wood AGI-Mixer, Model V/P-A, Consisting of: (1) J.C. Pardo & Sons Vacuum Kettle, 40 Gallon, 316 Stainless Steel. Approximate 26" diameter x approximate 26" deep. Lift out clamp on domed top cover, hemispherical bottom. Internal rated 15 psi or full vacuum at 250 degrees F. 304 Stainless steel jacket rated 40 psi at 287 degrees F. Tilt out agitator bridge with inner bar agitator and an anchor style scrapper agitator. (1) Gifford Wood homogenizer mixer, all set up for hydraulic drive. 2" Center bottom outlet. Mounted on (4) legs. Serial# 4402, National Board# 2158. Includes an operator panel, control panel, 0.75hp circulation pump and a Watlow electric heater. Mounted on a common carbon steel base.

MFR: Gifford

Precision Stainless 150 Liter (40 Gallon) 316L Stainless Steel Reactor Vessel.

Used- Precision Stainless 150 Liter (40 Gallon) 316L Stainless Steel Reactor Vessel. Rated for a maximum allowable working pressure (MAWP) of 45 PSI Full Vacuum at 300 degrees Fahrenheit. Jacket rated for 100 PSI at 300 degrees Fahrenheit. Multiple top inlets, clamps and probes, dished bottom. Forklift ready, mobile on casters. Manufactured in 1991. National Board Number 3424, Serial number 5203-4. Previously used in biotech operation.

MFR: Precision Stainless

Precision Stainless Reactor 150 Liter (40 Gallon) 316L Stainless Steel Vessel

Used- Precision Stainless 40 Gallon (150 Liter) 316L Stainless Steel Reactor Vessel. Rated for a maximum allowable working pressure (MAWP) of 45 PSI. Full Vacuum at 300 degrees Fahrenheit. Jacketed for 100 PSI @ 300 degrees Fahrenheit. Multiple top inlets, clamps and probes, dished bottom. Forklift ready, mobile on casters. Previously used in biotech operation.

MFR: Precision Stainless

Precision Stainless 150 Liter (40 Gallon) 316L Stainless Steel Vertical Reactor

Used- Precision Stainless Vertical 150 Liter (40 Gallon) 316L Stainless Steel Reactor Vessel. Rated for a maximum allowable working pressure (MAWP) of 45 PSI. Full Vacuum at 300 degrees Fahrenheit. Jacket rated for 100 PSI at 300 degrees Fahrenheit. 316L internal vessel, 304L jacket construction. Multiple top inlets, clamps and probes, dished bottom. Forklift ready, mobile on casters. Manufactured in 1991. Serial number 5203-3. National Board Number 3423. Previously used in biotech operation.

MFR: Precision Stainless

Precision Stainless Reactor 150 Liter (40 Gallon) 316L Stainless Steel Vessel

Used- Precision Stainless 150 Liter (40 Gallon) Reactor, 316L Stainless Steel, Vertical. Rated for a maximum allowable working pressure (MAWP) of 45 PSI / Full Vacuum at 300 degrees Fahrenheit. Jacket rated for 100 PSI at 300 degrees Fahrenheit. 316L internal vessel, 304L jacket construction. Multiple top inlets, clamps and probes, dished bottom. Forklift ready, mobile on casters. Manufactured in 1991. Serial # 5203-2. Previously used in biotech operation.

MFR: Precision Stainless

Used – Atlas Copco GA30+ Rotary Screw Air Compressor – 40 HP, 210 CFM, 109 PSIG

Used Atlas Copco GA30+ Rotary Screw Air Compressor 40 HP, 210 CFM, 109 PSIG. Approximately 109psig max working pressure, 210 cfm capacity. Driven by a 30kw (40hp) motor. Mounted Control Panel.

MFR: Atlas Copco

Atlas Copco GA30+ Rotary Screw Compressor – 210 CFM, 40 HP Industrial Air System

Atlas Copco GA30+ Rotary Screw Compressor 210 CFM, 40 HP Industrial Air System. Approximately 109psig max working pressure, 210 cfm capacity. Driven by a 30kw (40hp) motor. Mounted Control Panel.

MFR: Atlas Copco

GEA Ecoflex VT10 Plate Heat Exchanger For Sale – 145 PSI, 212°F Rated – Approx.

Used- GEA Ecoflex GmbH Plate Heat Exchanger, Model VT10 CDS-17. Approximately 40 square foot area. Approximate (44) Stainless steel plates 31" x 8-1/2" wide. Operating pressure 0 to 145 psi (0 to 10 bar). Operating temperature 32 to 212 degrees F (0 to 100 degrees C). 2" Inlet/outlets. Mounted in an expandable frame. Serial# 169/16856.