Contract Pharmaceutical Equipment
Stock No.:
52730016Pre-Owned 360” Long x 36” Wide Belt Conveyor for Sale
Used- Belt Conveyor. Approximate 360" long x 36" wide. Driven by motor through reducer. No Manufacturer tag.
MFR: No
Stock No.:
53493002Used Gryphon Biomass Hot Air Belt Dryer Model A.318 – Gas-Fired, Automated Hemp Dryer
Used- Gryphon Biomass Hot Air Belt Dryer. Model A.318 gas fired recirculating counter current air dryer; Approx. 213 lbs/hr water evaporation rate; 18 L x 3 W dryer section; Used for drying hemp w/ inlet moisture of 50-80% and outlet moisture of 7% to 11% moisture running at 3,000 lbs per 24 hours inlet and approximately 1,000 pounds per 24 hours dry mass outlet; 1.5 MMBTU nat. gas burner w/ all gas train valves, firing controls and Honeywell fire eye safeties; Supplemental electric heaters in each section; 2500 scfm blower with AB PowerFlex 753 VFD drive; Model HPSM254 AirPro high pressure radial shrouded fan, 600 RPM, 40HP, Built 2008; (6) PowerFlex 525 VFD drives; Condenser coils; Infeed sifter and lid lift assembly; 23.625" W cleated feed belt; CTS cooling tower and condenser unit; Full automation; Software plc controlled air volume, temperature and cycle time. Automated washing of chambers, air filter, and belt. Spares included: (4) condenser filters, dryer belt, bed skirts & spacers. Built 2019. Previously used for hemp.
Stock No.:
54550001Used ALAR AV360 Industrial Wastewater Filter System
Used Alar Engineering Corporation Auto-Vac, Model 360. Mid-sized, skid-mounted rotary vacuum drum precoat filter designed for industrial wastewater treatment and sludge dewatering applications. The system operates by drawing liquid through a filter aid media using a non-segmented drum design, enabling high-efficiency solids separation and capturing particles down to approximately 0.5 to 1 micron. The unit features a 3' diameter by 6' long stainless steel drum with a nominal filtering area of 56.5 sq. ft. and is engineered for durable, corrosion-resistant performance in demanding process environments. Total connected power is 20 HP. The system is additionally equipped with (2) 3,000-gallon holding tanks, a 2-stage pump, and a spare pump, providing operational redundancy and continuous processing capability. Approximate shipping weight is 6,200#, with a maximum system height of 8 6" and an overall skid footprint of 9'-0" wide by 16'-8" long. Well-suited for high-solids wastewater streams, the Auto-Vac is designed to deliver reliable automated filtration, sludge dewatering, and consistent effluent clarification while reducing disposal costs and labor requirements in industrial processing environments. Serial #12895. Last used to treat waste water for an automobile re-manufacturing facility.
MFR: Alar Engineering
Stock No.:
54687009Used Liberty Coppersmith 365 Gallon Copper Pot Still System
Used Liberty Coppersmith 365 Gallon Copper Pot Still System, Built 1947. Copper pot still is rated for 25 psi internal pressure and features a jacket covering the bottom dish of the kettle with a hammered copper finish. Kettle measures approximately 36" diameter x 54" straight side with a 24" dome top and 24" dish bottom. Includes copper shell-and-tube condenser, 45 gallon, 10 gallon and 5 gallon stainless steel collection tanks for heads, hearts and tails, (2) remote thermometers for pot and vapor temperature, stainless steel walkway with steps, copper process piping and brass spirits safe for product testing. Complete system is mounted on a stainless steel skid measuring approximately 6' x 10' with an overall height of approximately 13'8" to the top of the condenser. Drawing #47214. Serial #L2359. Built 1947. Possible applications include batch pot distillation of compatible fermented spirit products and use as an operational vintage display or centerpiece in a craft distillery.
MFR: Liberty
Stock No.:
48918012Used Carrier AquaSnap 30RB 270 Air-Cooled Liquid Chiller – 360-Ton Capacity
Used- Carrier AquaSnap Air-Cooled Liquid Chiller, Model 30RB270. Rated for approximately 360 tons of cooling capacity. Factory-packaged unit equipped with nine (9) high-efficiency hermetic rotary scroll compressors utilizing environmentally friendly Puron R-410A refrigerant. Features include a shell-and-tube direct expansion evaporator, ComfortLink microprocessor controls with plain-English diagnostics, demand limiting, compressor wear minimization, and factory-installed thermal-dispersion flow switches. The unit incorporates Carrier's Novation aluminum microchannel condenser coils and AeroAcoustic low-noise fan system for efficient heat transfer and quiet operation. Designed for industrial and commercial process cooling applications, the AquaSnap platform offers full-load efficiency ratings up to 10.31 EER and part-load efficiency ratings up to 14.3 IPLV, with operation in ambient temperatures ranging from 32 degrees F to 125 degrees F. Constructed on a heavy-duty galvanized steel frame with simplified single-point electrical connection and integrated control transformer. Previously installed in a sand processing plant for sand cooling service, this chiller is well suited for a variety of manufacturing, HVAC, and industrial temperature control applications.
Stock No.:
53959001Used Paul O Abbe Rota-Cone Vacuum Dryer, 240 Cu Ft Capacity – Model 108 RCVD, Stainless Steel, Fully Refurbished
Used- Paul O Abbe Rota-Cone Vacuum Dryer, Model 108 RCVD. 304 stainless steel. 240 cubic feet working capacity, 365 cubic feet total capacity. #4 Polished internal 108 diameter, rated 30 psi at 500 deg F to full vacuum. Carbon steel jacket rated 40 psi at 500 deg F coincident with full vacuum on internal. 20" diameter top port with cover, 12" center bottom outlet. Driven by a 10 hp, 3/60/230/460 volt gear motor with brake, ratio 82.6 to 1. Approximate 4 rpm cone. Mounted on carbon steel stands. Includes Wintek Vacuum Pump Skid, Mokon Chiller and Mokon hot water circulating unit. 2016 refurbishment included: General clean up; New Vacuum Line; New Oil Feed Box; New Drive & Idler Side Bearings; New Gear Wheel; New Spray Line; New Pinion Gear; New Gear Guard; New Valve w/ Gear Wheel Operator; New Gearmotor w/ Brake; Polished product contact areas to 180 Grit. 260" L x 120" W x 170" H. Approx. 18,000 lbs.
MFR: Paul O Abbe
Stock No.:
54244001Used Precision Stainless 37 Cu Ft (300 Gallon) Jacketed Double Ribbon Blender | 150 PSI Jacket | 5 HP Drive | Bottom Knife-Gate Discharge
Used Precision Stainless 37 Cu Ft (300 Gallon) Jacketed Double Ribbon Blender | 150 PSI Jacket | 5 HP Drive | Bottom Knife-Gate Discharge. Heavy-duty U-shaped trough with dual-ribbon agitator for fast, uniform blending, Jacket rated to 150PSI @ 400 Deg F. Drive Motor: 5 HP, 460/230V, 5 EW-EURO DRIVE, 3- phase AC motor, 480V, Iron Horse ACN, VFD Bottom discharge with knife-gate valve for efficient product release Polished interior finish for easy cleaning and sanitary operation Ideal for food, chemical, pharmaceutical, or cosmetic powder applications Dimensions: 8 L x 43" W x 58"H Weight (lb.): 3,200 lbs
MFR: Precision Stainless
Stock No.:
88940Industrial Vacuum Belt Filter - Pannevis RT, 316 SS & Polypropylene
Used- Pannevis Horizontal Vacuum Belt Filter, Type RT, 316 Stainless Steel/Polypropylene Construction. Approximate 5.3 square meter filtration area. Filter 960 x 5600mm. Vacuum tray. Driven by a .75 kw, 3/50/380 volt varispeed motor. Mounted on a carbon steel frame. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Pannevis
Stock No.:
54687104Used 370 square feet Isotherm 304 stainless steel shell and tube heat exchanger. Heat exchanger built by Isotherm of Arlington, TX in 2000. Model number IX-1215L for non-lethal, non-corrosive servic...
Used-370 square feet Isotherm 304 stainless steel shell and tube heat exchanger. Heat exchanger built by Isotherm of Arlington, TX in 2000. Model number IX-1215L for non-lethal, non-corrosive service. Serial number 00038X. National Board number 66. Shell MAWP is 100 PSI @200 degree F. Tube MAWP is 250 PSI @ 200 degee F. Unit has 154- 16 gauge SA249-TP304 straight tubes 14'- 8 5/8" long. Shell is 12-3/4" diameter times 14'-8 5/8" long of SA312-TP304. Both heads are 304 stainless steel. Shell side nozzles are two 4" RFSO flanges, one 1" threaded coupling, and one 3/4" threaded coupling. Tube side nozzles are two 3" tubes, two 1-1/4" tubes and two 1/4" couplings.The tube side tubes are brazed into the head and appear to be copper. Fittings or attachment to piping required. Unit has two saddle supports.
Stock No.:
10715053In STOCK AND New- Paul O. Abbe, Model RB-375 Ribbon Blender
NEW & IN STOCK- Paul O. Abbe, Model RB-375 Ribbon Blender.In -Stock . 375 Cubic Foot working capacity. 441 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 67.7" wide x 157.5" long x 78.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 20 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 5.5" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 20,944 pounds. Approximate overall dimensions: 91.9" wide x 237.1" long x 104.7" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
54697002Used CMS 38.3 Sq. Ft. 316L Stainless Steel Shell and Tube Heat Exchanger
Used CMS Heat Transfer Division 38.3 Square Foot 316L Stainless Steel Horizontal Shell And Tube Heat Exchanger With 160 PSI Pressure Rating. Industrial shell and tube heat exchanger designed for liquid-to-liquid heat transfer, process cooling and industrial temperature control applications. Features approximately 38.3 square feet of heat transfer surface area with (22) straight tubes constructed of 316L stainless steel, each measuring 3/4" in diameter. Shell and tubes are constructed of 316L stainless steel and rated for a maximum allowable working pressure of 160 psi and full vacuum at operating temperatures ranging from -20 F to 400 F. Process connections include (2) 3" shell-side openings, (2) 3" tube-side openings and (4) 3/4" auxiliary nozzles. Originally designed as an industrial cooler, Equipment Tag E-600. Manufactured by CMS Heat Transfer Division, Inc., Bohemia, New York, for Cincinnati Heat Exchangers. Serial #3194.1. National Board #2247. Possible applications include liquid-to-liquid cooling, industrial process temperature control, circulating water cooling, lubricating oil cooling, hydraulic fluid cooling, chemical process cooling, heat recovery and thermal management of other compatible industrial liquids.
