Contract Pharmaceutical Equipment

Used Lleal AME-2600-SSF Double Sigma Blade Mixer Kneader with Extruder – 1,300 Liter

Used Lleal Process Model AME-2600-SSF Carbon Steel Double Sigma Blade Mixer Kneader And Extruder With 2,600 Liter Total Capacity, 1,300 Liter Working Capacity And 270 HP Hydraulic Power System. Heavy-duty industrial batch mixer, kneader and extrusion system designed for intensive mixing, kneading, homogenizing and processing of compatible high-viscosity materials, pastes and compounds. Features a carbon steel mixing trough with approximately 2,600 liters (680 gallons) total capacity and 1,300 liters (350 gallons) working capacity, equipped with (3) carbon steel heating coils designed for thermal oil operation at temperatures up to 356 F (180 C) and maximum operating pressure of 60 psi (4 bar). Mixing chamber includes (2) carbon steel double sigma kneading blades with internal heating circuits designed for water recirculation at 356 F (180 C) and maximum pressure of 4 bar. Blades feature machined and polished surfaces, double-bearing shaft supports at both ends and variable operating speeds ranging from 0 to 25 RPM. Equipped with a carbon steel extrusion screw incorporating an internal water recirculation heating circuit, with constant screw pitch through the mixing trough and decreasing pitch through the extrusion chamber. Extrusion screw operates at variable speeds from 0 to 25 RPM. Includes a carbon steel extrusion chamber with heating jacket rated for temperatures up to 356 F (180 C) and maximum pressure of 60 psi (4 bar). Heated components, including the mixing trough, end plates and extrusion chamber, feature approximately 3" thick rock wool thermal insulation covered with stainless steel cladding. Equipped with (6) stuffing boxes containing braided Teflon packing and hard chrome-coated protective caps at the blade shaft sealing surfaces. Features an insulated carbon steel dust-tight cover with hydraulic lifting mechanism, (4) hydraulic safety seals and operation from the control panel. Mixing blades are driven by (2) hydraulic motors with planetary gear reducers, powered by a 270 HP hydraulic power pack incorporating (2) independent hydraulic pumps and separate hydraulic circuits. Extrusion screw is driven by an additional hydraulic motor with planetary gear reducer, powered by the same 270 HP hydraulic system through an independent hydraulic pump and circuit. Hydraulic power pack is equipped with an air refrigeration cooling system for temperature control. Manufactured by Lleal S.A., Badalona, Spain. Manufacturer reference OF:14162-M/97. Possible applications include high-viscosity mixing, sigma blade kneading, heated batch processing, paste homogenization and extrusion of compatible adhesives, sealants, mastics, polymer compounds, rubber-based formulations, pigment pastes, specialty chemical compounds and other suitable viscous industrial materials. Serial# 14162. Skid Order# 14/250391.

Buy Used Generac 350kW Standby Generator – 800A Breaker, Only 277 Hours

Used Generac 350 kW Standby Diesel Generator Set, Model SD0350-G36160D18GPSY, Mitsubishi 16L engine rated at 1800 RPM, Serial# 0A8829. Unit configured for 3/60/120/208V, 12 lead reconnectable to other voltages. 800 Amp main-line circuit breaker. Generac digital control panel. 24 Volt DC Battery Charger. Sound attenuated enclosure. 706 gallon UL listed sub-base fuel tank with secondary containment. 277 Hours. Serial# 2089404, Built 2006. Overall dimensions 200"L x 58"W x 118"T.

MFR: Generac

Used Ingersoll-Rand H300 Skid-Mounted Rotary Screw Air Compressor – 1264 CFM, 350 HP, Built 2014

Used Ingersoll-Rand H300 Skid-Mounted Rotary Screw Air Compressor 1264 CFM, 350 HP, Built 2014. Rated operating pressure 125 psig. Maximum pressure rating 128 psig. 350 HP drive motor. 3 phase, 60 Hz. 4000V/460V. Approximately 20,200 hours.

MFR: Ingersoll-Rand

Ingersoll-Rand H300 Industrial Rotary Screw Air Compressor – 1264 CFM, 350 HP Skid Mounted System

Ingersoll-Rand H300 Industrial Rotary Screw Air Compressor 1264 CFM, 350 HP Skid Mounted System. Rated operating pressure 125 psig. Maximum pressure rating 128 psig. 350 HP drive motor. 3 phase, 60 Hz. 4000V/460V. Approximately 20,200 hours. Built 2014.

MFR: Ingersoll-Rand

Heavy-Duty Ingersoll-Rand H300 Rotary Screw Compressor – 350 HP, 1264 CFM Plant Air System

Heavy-Duty Ingersoll-Rand H300 Rotary Screw Compressor 350 HP, 1264 CFM Plant Air System. Rated operating pressure 125 psig. Maximum pressure rating 128 psig. 350 HP drive motor. 3 phase, 60 Hz. 4000V/460V. Approximately 20,200 hours. Built 2014.

MFR: Ingersoll-Rand

Used 2020 Caterpillar D3506C 350 kW Diesel Generator Set

Used 2020 Caterpillar 350 kW diesel generator set, model D3506C, powered by a CAT C13 diesel engine, serial number PW30188. Generator operates at 1800 RPM and is rated for 3-phase, 60 Hz, 480V electrical service. Unit has 779 operating hours and is equipped with a weather enclosure and sub-base fuel tank. Possible applications and suitable uses include standby or backup electrical power for industrial plants, manufacturing facilities, warehouses, commercial buildings, and other 480V 3-phase operations. Built 2020.

MFR: Caterpillar

Used Crepaco 3500-Gallon Stainless Steel Tank – Vertical for Sale

Used- Crepaco 3,500-gallon vertical tank constructed of 304 stainless steel, measuring approximately 96" diameter x 118" straight side. Tank features a dished top with dent, coned bottom, fixed stainless steel agitator bridge, (1) internal baffle, and (1) spray ball. Top openings include (2) 1-1/2" openings, (1) 2-1/2" opening, (1) 4" drive opening, and (1) 12" manway with cover. Side includes (1) 20" x 16" oval manway with cover, with a 2" center bottom outlet for product discharge. Tank is supported by (6) stainless steel legs. Serial #C6934, Built 2000. Possible applications and suitable products include beverage batching, liquid food storage, ingredient blending, chemical intermediates, wash-water/CIP storage, and non-pressure bulk liquid storage.

MFR: Crepaco

Used 3,500 Gallon Vertical Mixing Tank | 304 Stainless Steel Beverage-Grade Vessel

Used 3,500 Gallon Vertical Mixing Tank | 304 Stainless Steel Beverage-Grade Vessel. 7'9" D x 12' OAH. Dome top, sloped bottom. Side manhole. Side discharge outlet. Side-mounted agitator. Has CIP sprayball. Inlets at top of tank. On stainless steel legs. Previously used in a beverage application.

Used Bird 36x72 Decanter Centrifuge | Heavy-Duty Continuous Solid–Liquid Separation System

Used Bird 36x72 Decanter Centrifuge | Heavy-Duty Continuous SolidLiquid Separation System. 316 Stainless steel construction. Max bowl speed 1190 RPM. 150 HP motor. 36'' x 72'' bowl dimensions.

MFR: Bird

Used Balemaster BB Series Model Q6 Auto-Tie Baler – 30"x36" Bale, 20 HP, 3000 PSI, Touchscreen PLC, 1995

Used- Balemaster BB Series Model Q6, J.2.7, U, Z.7, J, I.2, Q.W Auto-Tie Baler. Bale section measures 30" x 36". Feed chute 28" x 32". 20 HP hydraulic package with 6" diameter hydraulic cylinder. Ram rated at 85 lbs. per square inch at 3000 psi. Charging chamber is 25.3 cubic feet. PLC control with touch screen operator interface. Machine weighs 14,900 pounds with oil and no bale. Limited use. Serial# B0234-06-4298527. Manufactured in 1995.

MFR: Balemaster

Used DCR Construction Acid Reduction Column – 304 Stainless Steel, 49’ Height, 50 PSI

Used DCR Construction acid reduction column, 304 stainless steel, vertical design. Approx. 36" diameter x 297" straight side with 2:1 elliptical top and bottom heads, giving approx. 49' overall height. Internal rating 50 psi at -20 to 250 F. Top openings include 18" vapor outlet, 6" liquid inlet, 24" manway with cover and davit arm, 12" packing dump, 8" vapor inlet, and (4) 3" nozzles. Bottom openings include 24" manway with cover and davit arm and 4" liquid bottom outlet. Mounted on approx. 183" tall carbon steel skirt. Serial 4411 7798, National Board #216, built 2007.Suitable for acid reduction/scrubbing or other gas/liquid contact applications in chemical processing, where 304 stainless construction and 50 psi rating are required. Multiple manways and packing dump facilitate packing installation and maintenance. Subject to buyer engineering and regulatory validation. Capacity and rating: 36" diameter, 49' height, 50 psi rating, 2007 build.Corrosion resistance: 304 stainless, acid reduction service. Maintenance access: dual manways and packing dump.

MFR: DCR Construction

Pre-Owned Alar Auto-Vac 340 – 37.7 Sq Ft Filtering Area, 304SS Drum

Used- Alar Auto-Vac Rotary Vacuum Filter System, Model 340. 36" Diameter x 48" face 304SS drum, approximately 37.7 square feet nominal filtering area. Drum driven by an approximate .4hp, 1750 rpm gear motor, 288 to 1 ratio. Dry solids discharge with adjustable knife. Bottom holding tank with rake agitator, driven by a .33hp, 3/60/208-230/460 volt, 1140rpm motor. Receiver tank with pump, pump driven by a 1-1/2hp, 3/60/208-230/460 volt, 3450rpm motor. Control panel with Allen Bradley SLC PLC. Total connected horsepower 13. All unitized on a common carbon steel frame. Serial# 13121.

MFR: Alar Engineering