Contract Pharmaceutical Equipment

Used Carrier Ampli-Flow Vibrating Feeder – Model FC2410051/4304, Stainless Steel

Used- Carrier Vibrating Equipment Ampli-Flow Vibrating Feeder, Model FC2410051/4304, Stainless Steel. 24" wide x 72" long, single deck with scalper type insert. Driven by an approximate 1 hp motor.

MFR: Carrier

Used - American Process TD-24 Cylindrical Plow Mixer, 24 Cu. Ft., Stainless Steel

Used- American Process Cylindrical Plow Mixer, Model TD-24, Approximate 24 Cubic Feet Working Capacity, Stainless Steel. Non-jacketed chamber 30" diameter x 84" long, shaft with fixed plows and end scrapers. Driven by a 30 hp, 3/60/460 volt, 1780 rpm motor thru a Sew reducer, ratio 15.77 to 1. Openings top, (2) side access doors, center bottom outlet. Serial # 4433.

MFR: American Process Systems

Used American Process TD-24 Mixer - 24 Cu. Ft. Capacity, Fixed Plows

Used- American Process Model TD-24 Cylindrical Plow Mixer, Approximate 24 Cubic Feet Working Capacity, Stainless Steel. Non-jacketed chamber 30" diameter x 84" long, shaft with fixed plows and end scrapers. Driven by a 30 hp, 3/60/460 volt, 1780 rpm motor thru a Sew reducer, ratio 15.77 to 1. Openings top, (2) side access doors, center bottom outlet. Serial # 4431.

MFR: American Process Systems

Unused Paul O. Abbe OPCM-67 Ceramic Ball Mill – 250L, 3 HP, 34 RPM

Unused- Paul O Abbe One Piece Ceramic Ball Mill, Model OPCM-67. 250 liter, 19% alumina content. Approximate 24.8" diameter x 31.9" long. 6.7" inlet/outlet, 39" discharge height from the top of the base plate to hatch. Driven by a 3 hp direct shaft mounted motor. 34 rpm maximum vessel rotation. Mounted on painted carbon steel stands on a painted carbon steel base. Serial# 196635OPCM.

MFR: Paul O Abbe

Used 2,400 Gallon Stainless Steel Single-Wall Storage Tank

Used- 2,400 Gallon Storage Tank, Stainless Steel Single Wall, measures 69" diameter X 168" high. Includes side bottom manway with bottom outlet.

Used Stainless Steel Single Wall 2,400 Gallon Storage Tank

Used- 304 Stainless Steel Single Wall 2,400 Gallon Storage Tank, measures 69" diameter X 168" high. Includes side bottom manway with bottom outlet.

2,400 Square Feet Alfa Laval Spiral Heat Exchanger

Used- Alfa Laval Thermal Horizontal Spiral Heat Exchanger, 2400 Square Feet, Model 1-H. 316 Stainless steel product contact areas. Hot and cold side rated 125 psi at 250 degrees F. Carbon steel removable heads with 316 stainless steel clad. Openings (4) 4". Mounted on carbon steel saddles. National Board# 13862, Serial# 18229. Year 1987.

MFR: Alfa Laval

Used Alfa Laval / Sharples PM-70000 Super-D-Canter Solid bowl Decanter Centrifuge

Used- Alfa Laval / Sharples PM-70000 Super-D-Canter Solid bowl Decanter Centrifuge, (same size as a P-5400), stainless steel construction (product contact areas). 5" single lead conveyor, base, casing, gearbox, 200 HP main drive motor, lubrication pump system.

MFR: Sharples

Used Fryma Koruma MZ-130/B Toothed Colloid Mill | 25 HP | 700–7000 L/hr | Sanitary | High Shear Mixer

Used- Fryma Koruma Toothed Colloid Mill, Model MZ-130/B, dispersing and homogenizing liquid to highly viscous materials. Capacity range approx.: 700 - 7,000 L/hr. Product fineness approx.: 100 - 500um. 18.5 kw (25 HP), 3 phase, 60 cycle, 208 volts on portable cart with control panel. High Shear Mixer. Last used in sanitary Pharmaceutical plant.

MFR: Fryma

Used Hoffland 25 Cu Ft Air/Hydraulic Filter Press | 50 Plate 800mm Dewatering System

Used- Hoffland Air/Hydraulic Filter Press, 25 Cubic Foot. (50) 800mm plates. Gasketed. CPVC Flanged Outlets. 169" Between Legs. OAD: 221"L x 42"W x 66"H.

MFR: Hoffland

Used Alfa Laval NX-6541 "SanX" Solid Bowl Decanter Centrifuge – Built 2020

Used- Alfa Laval NX-6541 "Sanx" solid bowl decanter centrifuge, SanX model, stainless steel construction (product contact areas), max bowl speed 3100 rpm. 25" diameter x 98.75" long bowl. 360 degree solid discharge ports, 9" single lead conveyor , base, casing, gearbox 127/1 ratio, 75 hp main drive motor, 30 hp backdrive motor, control (460/3/60). Built 2020

MFR: Alfa Laval

Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill – 25 HP Pharmaceutical & Food Grade Mill

Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill 25 HP Pharmaceutical & Food Grade Mill. Chamber: 12.5" wide x 15.37" long, with center screen support bar, screens not included. 32 milling blades, fixed blunt flat-edge/knife edge, reversible. 10" flange inlet. 16" x 19" oval discharge with banding groove, 75.5" above base elevation. Driven by a 25 HP, 3/60/230/460 Volt, 1770 RPM motor. Welded stainless steel portable base frame (4" box tubing), 42"W X 48"L. Serial# 9084.

MFR: Fitzpatrick