Contract Pharmaceutical Equipment
Stock No.:
10151501Alloy Fabricators Approximately 1,950 Gallon Mix Tank with Internal Coils
Used- Alloy Fabricators Approximately 1,950 Gallon Mix Tank with Internal Coils. 304 Stainless Steel Jacketed. 78" diameter x 81" straight side; Dished top and bottom; Internal rated 15/FV at 335 degrees F; Jacket rated 44 psi at 335 degrees F; Coils rated 44 psi at 335 degrees F; (4) side wall baffles; 7.5 hp axial type agitator, 304 stainless steel, Foam breaker at top - 2 blade, 51" dia; dual hub with 3 blades - upper 50" dia; lower 30" dia, 18" dia. 2 blade radial flow at bottom. Serial # 1-151A; Built 1991.
MFR: Alloy & Steel Fab
Stock No.:
54110002Used Doyle & Roth Shell & Tube Heat Exchanger | 1963 Sq. Ft. | Alloy 400 Tubes | 300 PSI | 2006/2018
Used Doyle & Roth Shell & Tube Heat Exchanger | 1963 Sq. Ft. | Alloy 400 Tubes | 300 PSI | 2006/2018. Monel/Alloy 400 tube side construction. Full vac/300 psig shell side design pressure; 390 psig shell side test pressure; 650/15 degrees F shell side max./min. design temp.; 1 pass shell side. Full vac/250 psig tube side design pressure; 325 psig tube side test pressure; 650/15 degrees F tube side max./min. design temp.; 3 pass shell side. OAD: 32" D x approx. 248" L. (300) 1.25" D x 240" L tubes. Built 2006, Repaired by Ohmstede in 2018. NB #20179. Original SN S-1443-4, new SN 824114.
MFR: Doyle & Roth
Stock No.:
10151644Used Patterson-Kelley 2 Cu. Ft. Stainless Steel Twin Shell V-Blender – 60 Lb./Cu. Ft. Density Rating
Used- Patterson-Kelley approximately 2 cubic foot stainless steel Twin Shell V-Blender. Rated for a maximum material density of 60 lbs. per cubic foot. Unit has provision for an intensifier bar; intensifier bar is not included. Model: Twin Shell Dry Blender.
MFR: Patterson Kelley
Stock No.:
10151645Used Patterson-Kelley 2 Cu. Ft. 316 Stainless Steel V-Blender – 270 Lb./Cu. Ft. Rating with Intensifier Bar
Used- Patterson-Kelley approximately 2 cubic foot Twin Shell V-Blender constructed of 316 stainless steel. Rated for a maximum material density of 270 lbs. per cubic foot. Equipped with an intensifier bar for enhanced mixing and dispersion. Unit is mounted on a stainless steel frame with casters for portability.
MFR: Patterson Kelley
Stock No.:
11059409Used Patterson-Kelley 2 Cu. Ft. Sanitary Stainless Steel V-Blender – Pharmaceutical Finish, 25 RPM with Dispersion Bar Provision
Used- Patterson Kelly 2 Cu.Ft. Twin Shell V Blender. Sanitary, Stainless Steel with Pharmaceutical grade finish. Rated 60 Lbs./Cu.Ft. material density. Unit has provisions for Liquid/Solids dispersion Bar. (No Bar installed) Shell has chain driven 3/4 HP, 208-220/440 volt with gear reducer for 25 RPM output. Bar drive is 2 HP with belts and guard. 6" Discharge with butterfly valve. 37" floor clearance. 14" charging ports with removable vented covers. Last use was pharmaceutical.
MFR: Patterson Kelley
Stock No.:
53011006High-Efficiency APV Crepaco W20/20 Pump – 105 GPM, 3500 RPM
High-Efficiency APV Crepaco W20/20 Pump 105 GPM, 3500 RPM. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9296-95.
MFR: APV/Crepaco
Stock No.:
53011009APV Crepaco Unused W20/20 Stainless Steel Pump – 105 GPM, 95 Head Feet
APV Crepaco Unused W20/20 Stainless Steel Pump 105 GPM, 95 Head Feet. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 3hp, 3/60/230/460 volt, 3520 rpm motor. Serial# H-9317.
MFR: APV/Crepaco
Stock No.:
53011010Unused APV Crepaco W20/20 Centrifugal Pump – 5HP Motor
Unused APV Crepaco W20/20 Stainless Centrifugal Pump 5HP Motor. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 3hp, 3/60/230/460 volt, 3520 rpm motor. Serial# H-9318.
MFR: APV/Crepaco
Stock No.:
53011011Unused Industrial-Grade APV Crepaco W20/20 Centrifugal Pump
Unused- Industrial-Grade APV Crepaco W20/20 Centrifugal Pump, Stainless Steel. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 3hp, 3/60/230/460 volt, 3520 rpm motor. Serial# H-9319.
MFR: APV/Crepaco
Stock No.:
53011014Unused Reliable APV Crepaco W20/20 Pump – 2” Inlet & Outlet, 5HP Motor
Unused-Reliable APV Crepaco W20/20 Pump 2" Inlet & Outlet, 5HP Motor. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9292-95.
MFR: APV/Crepaco
Stock No.:
53011015Stainless Steel APV Crepaco W20/20 Centrifugal Pump – Unused, 105 GPM
Stainless Steel APV Crepaco W20/20 Centrifugal Pump Unused, 105 GPM. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9293-95.
MFR: APV/Crepaco
Stock No.:
53011016Unused Heavy-Duty APV Crepaco W20/20 Pump – Industrial Performance
Unused- Heavy-Duty APV Crepaco W20/20 Pump Industrial Performance. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9295-95.
MFR: APV/Crepaco
