Contract Pharmaceutical Equipment

Stainless Hammer Mill by Fitzpatrick – Screw Feeder, Mounted on Casters

Used Fitzpatrick Hammer Mill, Swinging Hammers, with Screw Feeder (no name plate). Approximate chamber 11" x 6". Swinging hammers. Motor: 575 volt, 3500 rpm. Includes feed hopper and screw feeder, stainless steel control panel. Mounted on frame with casters. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Fitzpatrick

Used Paul O. Abbe 12" Rota-Cone Vacuum Dryer – 0.5 CuFt, T316 Stainless, Skid-Mounted with Sterlco Heater

Used Paul O. Abbe 12" Rota-Cone Vacuum Dryer 0.5 CuFt, T316 Stainless, Skid-Mounted with Sterlco Heater. Vessel Volume: .5 cuft. T316 Stainless steel. Carbon steel Jacket. $4 Polish interior (180 Grit). Operating temperature: 250 deg F (121 deg C) Speed of vessel: 9 rpm. Full Vacuum to 14.7 psi. Jacket is 14.7 psi Max. With Sterlco Sterl-Tronic Heater. Model M6016-MX, Serial# 73558, 6000 Watts. 150 psig. Serial# of POA dryer is A45546. built 1992. (Vacuum pump not included, but can be provided at extra cost).

MFR: Paul O Abbe

Used Processall Tilt-A-Mix 20 H/V 20 Liter Stainless Steel Plow Mixer

Used- Processall Tilt-A-Mix Plow Mixer, Model 20 H/V. Stainless steel construction with a 20 liter (0.7 cubic foot) capacity jacketed mixing chamber and cantilever-style plows. Equipped with a 1 HP bottom-mounted drive assembly. 3/60/208-230/460V. Mounted on portable base with casters. Serial # 51. Suitable for small-batch mixing, blending, and processing of powders, granules, and other compatible materials used in food, chemical, pharmaceutical, and specialty manufacturing applications.

MFR: Processall

Used Lancaster Products model K high shear, counter current mixer for labs or small batches. Stainless Steel 0.7 cu.ft. total capacity, 0.3 cu.ft. working capacity removable drum. This unit is equipp...

Used-Lancaster Products model K high shear, counter current mixer for labs or small batches. Stainless Steel 0.7 cu.ft. total capacity, 0.3 cu.ft. working capacity removable drum. This unit is equipped with a side scrapper and comes with two different types of blades (one is stainless steel the other is carbon steel) The control panel has adjustable speed control and a digital timer. 208 vac 3 ph power required.

MFR: Lancaster

Used Friulair Chiller | Model CWM003-UE | 0.71 Ton | R407C Refrigerant | Compact Cooling System

Used- Friulair Chiller, Model CWM003-UE. 0.71 Ton nominal capacity. V0.013 gallon Refrigerant Circuit, R407C with 33.51 oz charge. Serial# 130021582. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Munson Industrial Rotary Blender – Model MX-1-SS

Used- Munson Industrial Rotary Blender, Model MX-1-SS. 1 cubic foot capacity; Stainless steel mixing chamber; Equipped with liquid spray nozzle. Mounted on portable stand with tilt discharge capabilities. Serial# 12190.

MFR: Munson Machinery

Used AMK VIU4 4-Liter Extrusion Kneader Mixtruder – Stainless Steel Sigma Blade Mixer Extruder with Vacuum Cover

Used- 4 Liter AMK Extrusion Kneader Mixtruder, Model VIU4. Stainless steel construction, vacuum cover, approximately 8" x 8" x 7.5" deep mixing changer, tangential sigma blades driven by 2.2 kw motor drive, discharge extruder driven by 1.5 kw motor drive, jacketed bowl and extruder barrel, on base, serial# 12202. Built 1985.

MFR: AMK

Vestil Hydraulic Drum Dumper for 30 & 55 Gallon Drums – Portable Unit

Used Vestil Model HDD-26-7-P Hydraulic Drum Dumper. Maximum Capacity up to 750 Lbs. Works with 55 and 30-gallon plastic, steel and fiber drums. The unit has a solid steel chute. Portable unit with two rigid and two swivel casters with floor lock screws. All steel construction. Upper travel limit switch, emergency brass safety velocity fuse in cylinder and vertical adjustment drum restraints are standard. Chute is rotated with a hand held control on an 8 ft. long coil cord standard.

MFR: Vestil

Used Yale 2,000 lb. Capacity 24V Electric Sit-Down Forklift – Model MSW020LAN24CS083

Used- Yale Aprox. 2,000 lb. Capacity 24 V Electric Sit-Down Forklift, Model MSW020LAN24CS083, S/N N576930 with 2-Stage 126" Lift Height

MFR: Yale

Used Paul O. Abbe Lab Double Arm Mixer – Model 1BSB, 1 Gal, 316 SS, Hydraulic Tilt

Used- Paul O. Abbe Lab Double Arm Mixer, Model 1BSB, 316 Stainless Steel. 1 Gallon operating capacity (2 total). Carbon steel jacket rated 14 psi. Bowl approximate 7" left to right x 9-1/2" front to back x 6-3/4" deep, tangential sigma blades, front blade 70 to 17 rpm, rear blade 41 to 10 rpm, flat top cover, geared one end. Single ram hydraulic tilt with power pack. Mixer driven by a 2 hp, 3/60/230/460 volt, 814 rpm variable speed motor with reducer. Mounted on legs with base. Serial # A41282.

MFR: Paul O Abbe

Used Paul O. Abbe Lab Double Arm Mixer – Model 1SBM, 1 Gal, 316 SS, Hydraulic Tilt

Used- Paul O. Abbe Lab Double Arm Mixer, Model 1SBM, 316 Stainless Steel. 1 Gallon operating capacity (2 total). Carbon steel jacket rated 14 psi. Bowl approximate 7" left to right x 9" front to back x 7-3/4" deep, overlapping sigma blades, front blade 53.9 to 13.9 rpm, rear blade 53.9 to 13.9 rpm, flat top cover, geared one end. Single ram hydraulic tilt with power pack. Mixer driven by a 2 hp, 3/60/230/460 volt, 1725 rpm variable speed motor with reducer. Mounted on legs with base. Serial # A39823.

MFR: Paul O Abbe

Used Fairey Microfiltrex LTD (Porvair) Stainless Steel Dust Collector / Pulse Jet Filter System

Used- Fairey Microfiltrex LTD (Porvair) Stainless Steel Dust Collector / Pulse Jet Filter System. Vertical, 316L Stainless Steel. Vessel body 10" diameter x 24" straight side. Shell rated 90 psi / FV at 30 to 212 degrees F. 316L Heads. Jacket rated 90 psi / FV at 30 to 212 degrees R. (4) Approximate 3" diameter x 23" long filter cages. 4", (2) 1/4" Inlets. Certified by Ardeth Engineering - National Board# 623, Serial# 690, Built 1996.

MFR: Fairey Microfiltrex