Contract Pharmaceutical Equipment

R.A Jones (Aerofill) Model 1695 | 18-Head Rotary TTV Gasser Shaker

Used- (Aerofill) R.A Jones Model 1695 Ultraflex Rotary 18 Head TTV "Gasser Shaker". Capable of speeds up to 275 cans per minute (depending on application). Container size range: 1-3/8" - 3" or 35mm - 76.2mm (diam) x 5" - 10" (height) including spray tip stem. Includes Allen Bradley CompactLogix L24ER PLC, A/B panelview plus 700 HMI. Conveyor 3-1/2" wide x 107" long. 5HP 3/60/230/460V. Has a 10HP Hydraulic power pack. 3/60/480V. Multi head gasser shaker for high speed product absorption within aerosol containers, using either carbon dioxide (CO2) or nitrous oxide (N2O). This may be accomplished via pressurized gas or via equilibrium. The absorption of the gas into the product is enhanced by mechanically agitating the container during the filling process. Currently set up for 2-1/8" internal diameter x 5-1/4" tall and was last used in a dairy beverage operation.

MFR: Aerofil

Used Aesus Delta Chuckcap Automatic Single Chuck Capper – 60 CPM

Used- Aesus Model Delta Chuckcap Automatic Single Chuck Capper. Capable of speeds up to 60 containers per minute. Has intermittent motion carton indexing with two station tightener (1 pre-spin station, 1 final torqueing station). Cap size range: 0" to 5" diameter x 0" to 1" thick (with changeparts). Bottle size range: 0" to 10" diameter x 0" to 12" tall. Allen Bradley Mircologix 1400 PLC, A/B Panelview Plus 600 HMI, Panasonic servo drives. Pneumatic height adjustment. Includes cap sorting elevator (oversized), for flat caps up to 5" diameter. Last used in nutritional supplement packaging operation. 1/60/208 Volt.

MFR: Aesus

Buy Unused Aesus Premier Shrink Sleeve Applicator — 150 CPM Capability

Unused- Aesus Continuous Motion Full Body Shrink Labeler, Model Premier Shrink. Capable of up to 150 CPM. Size range from 1-1/8" diameter up to 4.9" (198mm) diameter. Maximum lay flat 200mm. 5" Inside diameter sleeve roll core. 16" Outside diameter sleeve reel holder. Conveyor belt 4" wide. Allen Bradley Micrologix 1400 PLC, A/B panelview plus 7 HMI, Panasonic servo drive. End of film sensor, photo registration. Dual rotating sleeve applicator. Includes Aseus Deltaveyor 4" wide x 22' long, serial# 881760623. 3/60/208-240 Volt, 13 Amp. Serial# 889970523.

MFR: Aesus

Buy Used Aesus Model Delta Cap-4 Inline Spindle Capper – Up to 120 BPM

Used Aesus Model Delta Cap-4 Inline Spindle Capper. Speeds up to 120 bpm (cap bottle dependent) and includes 4 pairs of easy adjust cap tightening stations. Approximate container height 2" to 14" tall. Cap size range 13mm to 93mm. With 4-1/2" wide conveyor. Cap sorting elevator. Indexing wheel. Dual sided belts. HMI, Omron Sysmac CJ1M CPU11 PLC. Motorized height adjustable stand. Currently setup with 35.75mm caps. 1/60/208V.

MFR: Aesus

Used AFM TS-CH100-V1B Stainless Steel Tamper Evident Neckbander – Up to 120 Containers Per Minute

Used AFM TS-CH100-V1B Stainless Steel Tamper Evident Neckbander Up to 120 Containers Per Minute. Bander is rated for speeds from 20-120 containers per minute (depending on application). Has film requirements of: 5mm to .07mm (thickness) with a layflat of 40mm-150mm and a cut length of 20mm-50mm. Has stepper motor controls and butterfly mandrel. Set up for unregistered clear film. Built 2016. 1/60/220V.

AJAX A200 Series Boiler for Sale – 50 HP, 90% Thermal Efficiency – 2,000,000 BTU

Used AJAX Natural Gas Boiler, Atlas A200 Series, Model: Atlas A200. Heating Surface: 42.4 sq. ft. Maximum Input: 2,000,000 BTU/hr, Output: 1,800,000 BTU/hr. Thermal Efficiency: 90%, Burner Output: 1,307,692 BTU/hr, Horsepower: 50 HP, Gross Input Pressure: 4.0" W.C. Max Allowable Working Pressure (MAWP): 160 PSIG. Honeywell Sola Hydronic control, Honeywell HMI. Voltage: 120V, 60Hz, 1 Phase, Full Load Amps: 5A, Control Voltage: 24V. Serial# 71628.

MFR: Ajax

Alfa Laval SRPX-417-HGV-14CH Desludger DIsc Centrifuge. Used.

Used- Alfa Laval SRPX-417-HGV-14CH Desludger DIsc Centrifuge. Stainless steel (product contact areas), separator design (liquid/liquid/solids separation), bottom feed. Hermetic design, maximum bowl speed 3900 rpm, centripetal pump liquid discharge, 30 kW drive motor (380/3/50). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Used Alfa Laval PX-60-VGD-140G Desludger Disc Centrifuge

Used-Alfa Laval PX-60-VGD-140G Desludger Disc Centrifuge, stainless steel construction (product contact areas), max bowl speed 6240 rpm, separator design (liquid/liquid/solids separation), 18.5 kW drive motor misc. discharge sludge expansion tank, tools. Mfg. 2003. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Alfa Laval BRPX-309 Desludger Disc Centrifuge. Used.

Used-Alfa Laval BRPX-309 Desludger Disc Centrifuge, Stainless steel construction (product contact areas), clarifier design, centripetal pump liquid discharge, approximately 20hp/15 kW, 230/460/3/60 drive motor motor.

MFR: Alfa Laval

Alfa Laval SPQX-512-S-31CG-60 Nozzle Disc Centrifuge. Used.

Used-Alfa Laval SPQX-512-S-31CG-60 Nozzle Disc Centrifuge, stainless steel construction (product contact areas), clarifier design (liquid/solids separation), centripetal pump liquid discharge, approx: 50 hp drive motor, belt drive.

MFR: Alfa Laval

Used Alfa Laval BRPX 417XGV-71C-50 Desludger Disc Centrifuge – Stainless Steel, 37 kW, Reconditioned

Used- Alfa Laval BRPX 417XGV-71C-50 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), Concentrator design (liquid/solid separation), centripetal pump liquid discharge, 37 KW (49.6hp) 3/50/380 drive motor. Reported reconditioned and in good working condition. Including set of tools and manual. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Used – Alfa Laval SWPX 810-SGV-34-CGL Desludger Disc Centrifuge – Stainless Steel, Food Grade

Used- Alfa Laval SWPX 810-SGV-34-CGL Desludger Disc Centrifuge. Stainless steel construction (product contact areas), Clarifier design (liquid/solid separation), Max bowl speed 7200 RPM. 30 KW 400/3/50 drive motor. incl. foundation frame, set of tools and manual. Previously used in a food application. New 2011. Reported rebuild. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Alfa Laval