Contract Packaging Equipment

Used Neuman & Esser 3V1-370/260/120 Reciprocating Gas Compressor – 3 Stage | 64 Nm³ Capacity | 140 kW | Built 1999

Used- Neuman & Esser Reciprocating Gas Compressor, Type 3V1-370/260/120, Model V. 3 stage; 1 crank; 64.0 Nm^3 capacity; 0 bar g suction pressure; 42 bar g final pressure; 980 RPM compressor speed; 100mm stroke; 140kW BHP. Serial# 990 685 , Built 1999.

MFR: Neuman & Esser

Used Donaldson Torit Dust Collector – Model CPV-1, 700 CFM

Used- Donaldson Torit Dust Collector, Model CPV-1. Up to 700 cfm, 90-100 psig. (1) filter pack. 1.5 HP. 3/60/208-460V motor. With hopper

MFR: Donaldson

Used Donaldson Torit CPV-1 Industrial Dust Collector with Hopper

Used Donaldson Torit CPV-1 Industrial Dust Collector with Hopper. Up to 700 cfm, 90-100 psig. (1) filter pack. 1.5 HP. 3/60/208-460V motor.

MFR: Donaldson

Pre-Owned Donaldson Torit CPV-1 Dust Collector – 700 CFM

Pre-Owned Donaldson Torit CPV-1 Dust Collector 700 CFM, 90-100 psig. (1) filter pack. 1.5 HP. 3/60/208-460V motor. With hopper

MFR: Donaldson

Donaldson Torit CPV-1 Compact Dust Collector for Industrial Use

Donaldson Torit CPV-1 Compact Dust Collector for Industrial Use. Up to 700 cfm, 90-100 psig. (1) filter pack. 1.5 HP. 3/60/208-460V motor. With hopper

MFR: Donaldson

Used Donaldson CPV-1 Dust Collector with Filter Pack & Hopper

Used Donaldson CPV-1 Dust Collector with Filter Pack & Hopper. Up to 700 cfm, 90-100 psig. (1) filter pack. 1.5 HP. 3/60/208-460V motor. With hopper

MFR: Donaldson

Donaldson Torit CPV-1 Industrial Dust Collector – Used & Reliable

Donaldson Torit CPV-1 Industrial Dust Collector Used & Reliable. Up to 700 cfm, 90-100 psig. (1) filter pack. 1.5 HP. 3/60/208-460V motor. With hopper

MFR: Donaldson

Used Fitzpatrick Fitzmill VFS-D6A Hammer Mill for Sale – 1000 kg/hr

Used- Fitzpatrick Fitzmill, Model VFS-D6A-PCS-LB / VFS D6-PCS-0401 Hammer Mill. Throughput rates of 200 - 1,000 kg/hr (depending on product). 10" gravity Feed hopper with 3" diameter x 18" long metering screw. 6" wide x 10" diameter Chamber with (16) 4" long x 1" wide x 3/16" thick blades on a fixed blade rotor. Direct drive. XP Controls, Allen Bradley SLC 5/03 PLC, A/B HMI, A/B Powerflex 70 drive. Stainless steel construction. Mounted on casters. Serial# 11839.

MFR: Fitzpatrick

Industrial Water Temperature Controller – Delta T ESW-09C 9KW

Used Delta T Systems Model ESW-09C Water Temperature Control Unit. 9 KW Heating capacity. 3/4 HP Pump. Approximate temperature range 32F to 230F (0C to 110C). Mounted on casters for mobility. Serial# 202167-1-1-1. 3/60/208 Volt, 35.5 Amp.

AGI 18.5" Wide Mobile Inclined Conveyor – Stainless Steel Frame

Used- AGI Industrial Mobile Inclined Cleated Conveyor System. Approximate 18-1/2" wide x 6 ft long, cleated belt. Cleat 8" x 2" tall. Driven by .5hp, 3/60/460 volt, 1730/58 rpm gear motor. Control panel with Allen Bradley powerflex 525 drive. Adjustable height. Mounted on stainless steel frame with casters. Serial# 2395-01. 3/60/460 Volt. Built 2022.

Used Olson / V-RAM Double By-Products Pumping System | 5,000 lbs/hr | Dual 50 HP Hydraul

Used Olson Mfg. Co. dba V-RAM Pumps Double By-Products Pumping System. (2) Identical Stainless Steel Pumps, approximately 5000 lbs/hr working capacity, with 679 max psi per each pump. 30-1/2" long x 14" wide x 15-1/2" deep infeed. Approximately 54" long trough with 11" ram head. 6" diameter outlet with gate valve, 10" discharge height. Includes Double B-Style Hydraulic Unit skid with air cooler. (2) 50hp 3/60/230/460v 1775rpm motors. Includes Control Panel.

Valmet Pre-Compression Plug Feeder & Shredder System – 1000 BDST/D Biomass Capacity

Unused Valmet Plug Screw Feeder with Pre-Compression Screw and Shredder. Designed for infeed raw material chips density 100 kg/m3, moisture content 20-48%, design flow rate 530 dry tons per day soft wood chips, (500BDST/D); Max capacity 1000 BDST/D; Turndown rate 50%. Valmet plug screw feeder: Fed by a pre-compression screw section, and 48" shredder at outlet; 850 HP Siemens motor 1750 rpm 460v 3/60; Gear Reducer ratio 25:1. Nominal speed 69 rpm, range 35-105 rpm; Inlet 35.83" x 25.79". Pre-compression screw: Materials of construction stainless steel 304L for all contact parts; Sits on top of plug screw at 90 degrees with s 24" diameter top force feed; Capacity Volume/Revolution inlet/discharge: 45 L / 22.5 L. Capacity / revolution at 110 kg/m3 = 5.46 BDST/D and net max capacity at 110 kg/m3 = 530 BDST/D; 250 HP motor 1750 rpm 460v 3/60 v-belt drive to gear reducer V-belt reduction 1:52; Gear reducer SEW Eurodrive ratio 18:1. Final rpm nominal speed 65 rpm, range 45-97 rpm; Outlet: 35.83" x 25.79". T-Pipe 48" Shredder: Fed from plug screw feeder 24" biomass inlet; MAWP 350 psig at 800F; 100 HP motor 1750 rpm 460v 3/60; Gear reducer 8.9:1 for nominal 197 rpm; Outlet 24" flange 600#. All equipment never used, new in 2020. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.