Contract Packaging Equipment

Used Gifford-Wood Model V/P-A AGI-Mixer – 40 Gallon Vacuum Kettle, Homogenizer Mixer, Stainless Steel

Used- Gifford-Wood AGI-Mixer, Model V/P-A, Consisting of: (1) J.C. Pardo & Sons Vacuum Kettle, 40 Gallon, 316 Stainless Steel. Approximate 26" diameter x approximate 26" deep. Lift out clamp on domed top cover, hemispherical bottom. Internal rated 15 psi or full vacuum at 250 degrees F. 304 Stainless steel jacket rated 40 psi at 287 degrees F. Tilt out agitator bridge with inner bar agitator and an anchor style scrapper agitator. (1) Gifford Wood homogenizer mixer, all set up for hydraulic drive. 2" Center bottom outlet. Mounted on (4) legs. Serial# 4402, National Board# 2158. Includes an operator panel, control panel, 0.75hp circulation pump and a Watlow electric heater. Mounted on a common carbon steel base.

MFR: Gifford

Used – Atlas Copco GA30+ Rotary Screw Air Compressor – 40 HP, 210 CFM, 109 PSIG

Used Atlas Copco GA30+ Rotary Screw Air Compressor 40 HP, 210 CFM, 109 PSIG. Approximately 109psig max working pressure, 210 cfm capacity. Driven by a 30kw (40hp) motor. Mounted Control Panel.

MFR: Atlas Copco

Atlas Copco GA30+ Rotary Screw Compressor – 210 CFM, 40 HP Industrial Air System

Atlas Copco GA30+ Rotary Screw Compressor 210 CFM, 40 HP Industrial Air System. Approximately 109psig max working pressure, 210 cfm capacity. Driven by a 30kw (40hp) motor. Mounted Control Panel.

MFR: Atlas Copco

Unused Paul O. Abbe BM-223 Ball Mill – Stainless Steel Industrial Grinding Mill

Unused Paul O. Abbe Model BM-223 all-stainless-steel ball mill with a 2-degree tapered cylinder for full discharge and split, hinged clamshell dry discharge housing. Mill cylinder measures 40" diameter x 44" long inside the shell with 5/8" shell thickness, 304 stainless steel product-contact construction, and 32 RA internal finish with 180 grit polish. Welded lifter bars terminate 1.5" from the ends, with welds ground to a minimum 1/4" radius and finished pit-free. Total mill volume is 32 cubic feet / 234 gallons with an 8 cubic foot dry working volume, equal to 25% of total volume. Unit includes a 13.25" x 14.75" rectangular cover hatch, contoured stainless steel grinding cover, and stainless steel dry discharge cover with 0.25" slots. The dry discharge housing fully encloses the cylinder and incorporates the patented 2-degree taper for full discharge, stainless steel counterweights, nominal 60-degree chute/hopper, 12" square bottom discharge opening, 48" discharge height, and sliding UHMW top cover. Driven by an SEW hollow-bore 20 HP TEFC motor rated for 230/460V, 3-phase, 60 Hz operation with nominal cylinder speed of 24 RPM. Unit is supported by two welded carbon steel A-frame stands with height extensions and Sherwin-Williams Tile Clad epoxy coating. Overall dimensions are approximately 138" high x 105" long x 64" deep. Possible applications and suitable products include dry batch grinding, milling, blending, and size reduction of compatible powders, pigments, ceramics, chemicals, minerals, and other dry solid materials.

MFR: Paul O Abbe

Unused Admix Rotosolver 250RS175 40 HP High-Shear Mixer

Unused Admix Rotosolver tote-base high-shear mixer, model 250RS175, constructed with 316 stainless steel wetted parts finished to 30 Ra. Unit is equipped with a 40 HP, 1,750 RPM explosion-proof motor rated for 3-phase, 60 Hz, 230/460V electrical service and a nominal shaft speed of 1,750 RPM. Mixer features an approximately 3.15" diameter shaft, 6.89" diameter threaded Rotosolver mix head, and 10.5" diameter 4-blade upper foil secured to the shaft. Unit uses a standard Admix flange mounting arrangement and is configured for mounting on a lift stand. Net weight is approximately 1,090 lb with shipping weight of approximately 1,430 lb. Rated torque is approximately 1,432 in-lb with bending moment of approximately 4,826 in-lb. Explosion-proof motor is UL and CSA approved for Class I, Division 1, Group D or Class II, Division 2, Groups F and G. Possible applications and suitable products include high-shear dispersion, powder wet-out, emulsification, hydration, and mixing of compatible food, beverage, pharmaceutical, cosmetic, chemical, and other liquid-process products.

MFR: Admix

Unused Admix 40 HP Rotosolver High-Shear Mixer

Unused Admix Rotosolver high-shear mixer, model 250RS175, tote-base. Constructed with 316 stainless steel wetted parts finished to 30 Ra. Unit is equipped with a 40 HP, 1,750 RPM explosion-proof motor rated for 3-phase, 60 Hz, 230/460V electrical service and a nominal shaft speed of 1,750 RPM. Mixer features an approximately 3.15" diameter shaft, 6.89" diameter threaded Rotosolver mix head, and 10.5" diameter 4-blade upper foil secured to the shaft. Unit uses a standard Admix flange mounting arrangement and is configured for mounting on a lift stand. Net weight is approximately 1,090 lb with shipping weight of approximately 1,430 lb. Rated torque is approximately 1,432 in-lb with bending moment of approximately 4,826 in-lb. Explosion-proof motor is UL and CSA approved for Class I, Division 1, Group D or Class II, Division 2, Groups F and G. Possible applications and suitable products include high-shear dispersion, powder wet-out, emulsification, hydration, and mixing of compatible food, beverage, pharmaceutical, cosmetic, chemical, and other liquid-process products.

MFR: Admix

Used Ingersoll Rand RS30i-A125 Rotary Screw Air Compressor Package – 40 HP, 184 CFM, 125 PSI

Used Ingersoll Rand RS30i-A125 Rotary Screw Air Compressor Package 40 HP, 184 CFM, 125 PSI. Rated for approximately 184 CFM with a 125 PSI maximum operating pressure. Driven by a 40 HP motor. Package includes an Ingersoll Rand D255NC refrigerated air dryer for moisture removal and improved compressed air quality, along with an air receiver tank to provide air storage, stabilize system pressure, and reduce compressor cycling. Reported 1,772 operating hours. Serial number CBV457593, built 2016. Complete compressed air package suitable for a wide range of industrial applications. Has 0 run hours since last major service was done.

MFR: Ingersoll-Rand

Used Charlotte SD-40 40 HP 316 Stainless Steel Colloid Mill

Used Chemicolloid Industries Charlotte Model SD-40 type 316 stainless steel horizontal inline colloid mill designed for processing pumpable slurry products. Unit is mounted on a common stainless steel base and driven by a 40 hp, 230/460 VAC, 3-phase, 60 Hz, 3,565 rpm motor. Rated for production rates up to approximately 1,200 gallons per hour depending on the product being processed. Equipped with an adjustable-gap rotor for controlled high-shear particle size reduction and capable of partial reduction down to approximately 3-5 microns depending on the material, application and machine configuration. Process connections are 3" OD / 2" ID threaded fittings. Last used in the food industry. Includes motor starter. Serial #4211. Possible applications include emulsification, homogenization, dispersion and particle size reduction of compatible sauces, dressings, mayonnaise, syrups, purees, creams, lotions, suspensions, slurries and other pumpable food, cosmetic, pharmaceutical and chemical products.

Used This disperser has two (2) stainless steel shafts that measure 56" long with a blade diameter of 12.5". Each shaft is driven by a 40 hp, 1765 rpm motor that requires 230/460 vac, 3 ph electricit...

Used-This disperser has two (2) stainless steel shafts that measure 56" long with a blade diameter of 12.5". Each shaft is driven by a 40 hp, 1765 rpm motor that requires 230/460 vac, 3 ph electricity. Unit is equipped with an air over oil lift. Rated for hazardous locations.

Used 2016 Carrier WeatherMaker 48A4E040 40-Ton Packaged Rooftop HVAC Unit – Gas Heat, R-410A Cooling

Used- 2016 Carrier WeatherMaker Model 48A4E040-E-521FE, 40-Ton Packaged Rooftop Gas Heat/Electric Cooling Unit, R-410A Refrigerant, 208/230V, 3-Phase, 60 Hz. Unit equipped with 20 HP indoor supply fan, (4) 1 HP condenser fan motors, dual refrigerant circuits with approximately 88 lbs total factory R-410A charge, and natural-gas heating rated 600,000 to 800,000 BTU/hr input with 648,000 BTU/hr output. Serial No. 3616U44012. Approximate base unit weight 5,334 lbs.

MFR: Carrier

Used Metal Craft TranStore 213 Gallon Tote Bin – 304 Stainless Steel

Used- Metal Craft TranStore Tote Bin, 304 Stainless steel, 213 Gallon. 9400 lb./ 4263 Kg Max. Serial# 75629-5, Built, 2017.

Used Lee 400 Gallon Jacketed Vacuum Pan. Mix Kettle with Scrape Agitation

Used- Lee 400 Gallon Jacketed Vacuum Pan. Mix Kettle with Scrape Agitation. Model 400D7S. Sanitary Vessel Rated for Full Vacuum. Jacket Rated 90 PSI at 332 Degree F. Agitator is 3/2 HP, 230/460-190/380 Volt, 1760/1460 rpm into gear box with 18:1 ratio. National Board # 6444. Kettle is 13' OAH x 5'3" OD at the jacket. 3" CBO.

MFR: Lee Ind