Contract Packaging Equipment

Unused Ingersoll Rand RS185i-A145 Rotary Screw Air Compressor Package – 260 HP, 1211 CFM, 2023 Build, Air Receiver Tanks, Air Dryer, Desiccant Dryer, Filtration, Oil/Water Separator

Unused- Ingersoll Rand Rotary Screw Air Compressor, Model RS185i-A145. 1211 CFM capacity; 185 psig rated operating pressure; 145 psig max. discharge pressure; 260 HP, 1792 RPM, 3/60/575V. Built 2023. With Samuel 1060 gallon air receiver tank, Samuel 120 gallon air receiver tank, Ingersoll Rand air dryer, Nano HLA 350 twin tower heatless desiccant air dryer, Nano NF 1000 filtration unit, and Beko Qwik Pure Model HLA 350 oil/water separator. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Ingersoll-Rand

Used Inox AG 1000L Mobile Pressure Tank – 316L Stainless Steel, 28.4 PSI, Horizontal

Used- Inox AG Mobile Pressure Tank, 1000 Liter (264.25 Gallon), 316L Stainless Steel, Horizontal. Approximate 31 diameter x 75 straight side, dished ends. Internal rated 2 kp/cm2 (1.96 bar/28.4 psi) at 200 degrees C. (392 F). Openings top (3) 4, 12-1/2, (2) 1-1/4, 2-1/4 end bottom outlet. Mounted on removable wood saddles with a carbon steel cart with casters. Located in the U.K. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Inox Industries

Used Thermo Scientific Single Use Bioreactor – Model HyClone 1000 Liters

Used- Thermo Scientific Single Use Bioreactor, Model HyClone, 1000 liter capacity, Stainless Steel. Open top, flat bottom shell. 38" diameter x 50" straight side. Dimple Jacket. Operating Temperature Range: Ambient to 40 +/- 0.1 Degrees C (104+/-0.2 DegreesF). 0.5psi Bag Pressure. Includes Brother 3 phase induction motor, 1/2hp 3/60/208-230/460v 1720rpm, 15:1 Ratio. Mounted on Stainless Steel Frame. Serial# H10289-03.

MFR: Thermo Scientific

Used 1000 liter single use bioreactor, Made by Thermo Scientific

Used- 1000 liter single use bioreactor, Made by Thermo Scientific, Stainless Steel. Open top, flat bottom shell. 38" diameter x 50" straight side. Dimple Jacket.Operating Temperature Range: Ambient to 40 +/- 0.1 Degrees C (104+/-0.2 DegreesF). 0.5psi Bag Pressure. Includes AB series A Drive, Brother 3 phase induction motor, 1/2hp 3/60/208-230/460v 1720rpm, 15:1 Ratio. Mounted on Stainless Steel Frame. Serial# H10289-04.

MFR: Thermo Scientific

Used Wenzhou ACE Machinery 1,000-Liter 316L Sanitary Mixing Tank – Jacketed, Insulated & Load Cell Equipped

Used- Wenzhou ACE Machinery 1,000-liter (264 Gallon) (1 cubic meter) stainless steel sanitary mixing tank with 316L stainless steel product-contact surfaces and 304 stainless steel exterior. The inner tank features a mirror-polished finish, 5 mm wall thickness, and a dimple jacket, with 2 mm outer cladding and PU foam insulation. Vessel is equipped with a 4 kW agitator operating at 36 RPM with Teflon scraper and a control box for mixing speed control. The inner vessel has a design pressure range of -0.1 MPa to 0.2 MPa, while the jacket has a design pressure of 0.35 MPa. Tank features sanitary clamps on each inlet orifice, a 3" bottom valve, load-cell connections, and one spare single-face mechanical seal. Additional equipment includes electrical upgrades, required safety equipment, condenser, controller, Rice Lake load cells, relief valve, and rotary shaft cage protection. Electrical requirements are 480 V, 3-phase, 60 Hz. Possible applications and suitable products include sanitary liquid mixing and processing of liquid products requiring agitation, heating, cooling, vacuum, pressure processing, or weight-based measurement.

Shandong HG Machinery 10,000 Liter Fermentation Tank

Unused - Shandong HG Machinery 10,000 Liter Fermentation Tank, 2641 Gallon (85 BBL), 304 Stainless Steel, Vertical. Approximately 78.74" diameter x 137.79" straight side. Dished top, 60 degree cone bottom. Jacket approximately 14m2, test pressure 0.2MPa (29 PSI). Openings top: 102mm (4"), 89mm (3.5"), 51mm (2"), Side: 540mm x 440mm Manhole (21.25" x 17.3"), 38mm (1.5"), 19mm (.75"). 1-1/2" Side cone outlet, 818mm (32.2") discharge height. 1-1/2" Center bottom outlet, approximate 60mm (2.36") discharge height. Mounted on (4) legs. Approximate 87" x 87" x 236" tall, 3400 lb

IN STOCK and NEW- Paul O Abbe Model RB-265 Ribbon Blender

NEW & IN STOCK- Paul O. Abbe Model RB-265 Ribbon Blender. In -Stock .265 Cubic Foot working capacity. 289 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 63" wide x 130" long x 67.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 26 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 14,960 pounds. Approximate overall dimensions: 81" wide x 206.5" long x 94.8" high. Controls are available upon request.

MFR: Paul O Abbe

Used Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity

Used- Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity. 10 diameter X 44 long straight side; Top Fittings: (2) 30" manways, (1) 1", (1) 2", (2) 3", (3) 4"; Has one bottom end 4" outlet; Dished ends; Ends certified by Trinity Industries; Mounted on saddles; 12-6" shipping height. Previously stored Sulfuric Acid.

High-Capacity Stainless Steel Jacketed Tank – Used. Made by Precision Stainless

High-Capacity Stainless Steel Jacketed Tank Used. Made by Precision Stainless. 103 Liter / 27.2 Gallon Capacity, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 5644-6, National Board# 3890. Used as Freeze / Thaw Vessel.

Precision Stainless Freeze/Thaw Vessel – 103 Liter, Used.

Precision Stainless Freeze/Thaw Vessel 103 Liter, Used. 103 Liter / 27.2 Gallon Capacity, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 201512-20, National Board# 8937. Used as Freeze / Thaw Vessel.

Used Precision Stainless 20” Diameter Jacketed Stainless Steel Tank

Used Precision Stainless 20" Diameter Jacketed Stainless Steel Tank. 103 Liter / 27.2 Gallon Capacity, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 7696-1, National Board# 1731. Used as Freeze / Thaw Vessel.

Used Industrial Precision Stainless Tank, Board Rated.

Used Industrial Precision Stainless Tank, Board Rated. 103 Liter / 27.2 Gallon Capacity, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 200254-27, National Board# 8628. Used as Freeze / Thaw Vessel.