Contract Packaging Equipment

Used American Process TD-24 Mixer - 24 Cu. Ft. Capacity, Fixed Plows

Used- American Process Model TD-24 Cylindrical Plow Mixer, Approximate 24 Cubic Feet Working Capacity, Stainless Steel. Non-jacketed chamber 30" diameter x 84" long, shaft with fixed plows and end scrapers. Driven by a 30 hp, 3/60/460 volt, 1780 rpm motor thru a Sew reducer, ratio 15.77 to 1. Openings top, (2) side access doors, center bottom outlet. Serial # 4431.

MFR: American Process Systems

Unused Paul O. Abbe OPCM-67 Ceramic Ball Mill – 250L, 3 HP, 34 RPM

Unused- Paul O Abbe One Piece Ceramic Ball Mill, Model OPCM-67. 250 liter, 19% alumina content. Approximate 24.8" diameter x 31.9" long. 6.7" inlet/outlet, 39" discharge height from the top of the base plate to hatch. Driven by a 3 hp direct shaft mounted motor. 34 rpm maximum vessel rotation. Mounted on painted carbon steel stands on a painted carbon steel base. Serial# 196635OPCM.

MFR: Paul O Abbe

Used 2,400 Gallon Stainless Steel Single-Wall Storage Tank

Used- 2,400 Gallon Storage Tank, Stainless Steel Single Wall, measures 69" diameter X 168" high. Includes side bottom manway with bottom outlet.

Used Stainless Steel Single Wall 2,400 Gallon Storage Tank

Used- 304 Stainless Steel Single Wall 2,400 Gallon Storage Tank, measures 69" diameter X 168" high. Includes side bottom manway with bottom outlet.

Used Fryma Koruma MZ-130/B Toothed Colloid Mill | 25 HP | 700–7000 L/hr | Sanitary | High Shear Mixer

Used- Fryma Koruma Toothed Colloid Mill, Model MZ-130/B, dispersing and homogenizing liquid to highly viscous materials. Capacity range approx.: 700 - 7,000 L/hr. Product fineness approx.: 100 - 500um. 18.5 kw (25 HP), 3 phase, 60 cycle, 208 volts on portable cart with control panel. High Shear Mixer. Last used in sanitary Pharmaceutical plant.

MFR: Fryma

Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill – 25 HP Pharmaceutical & Food Grade Mill

Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill 25 HP Pharmaceutical & Food Grade Mill. Chamber: 12.5" wide x 15.37" long, with center screen support bar, screens not included. 32 milling blades, fixed blunt flat-edge/knife edge, reversible. 10" flange inlet. 16" x 19" oval discharge with banding groove, 75.5" above base elevation. Driven by a 25 HP, 3/60/230/460 Volt, 1770 RPM motor. Welded stainless steel portable base frame (4" box tubing), 42"W X 48"L. Serial# 9084.

MFR: Fitzpatrick

Used Roark Enterprises 25-Gallon Stainless Steel Receiver Tank – 150 PSI, Vacuum Rated

Used- Roark Enterprises 25 Gallon Receiver Tank, Stainless Steel Construction. Approximately 16" diameter x 32" straight side, dish top and bottom. Internal rated 150 psi and full vacuum at 150 degrees F. Serial# 95.709.ME1, National Board# 460.

MFR: Roark Enterprises

Unused Wildcat 25 kW Natural Gas/Propane Generator | Model BS0025LPAO | Kubota WG1605 Engine | Built 2022

Unused Wildcat 25 kW Natural Gas/Propane Generator | Model BS0025LPAO | Kubota WG1605 Engine | Built 2022. Rated 25kW. 42.5kW (approx. 56 HP) at 3600 RPM. Meccalte model ECP28 L4 alternator. On casters. OAD: 60" x 30" W x 52" H.

Used Kaeser ASD 25 Rotary Screw Air Compressor | 25 HP | 112 CFM @ 125 PSIG | Si

Used Kaeser ASD 25 Rotary Screw Air Compressor | 25 HP | 112 CFM @ 125 PSIG | Sigma Control 2. Unit is driven by a 25hp 3/60/208-230/460v 3550rpm motor. Equipped with a Kaeser Sigma Control 2 controller with RFID capability. Hours at time of inspection indicate approximately 39,567 run hours and 30,258 load hours. Enclosure is Type 1, designed for indoor industrial use. Nameplate data includes drive motor FLA of 63/59/30 amps (depending on voltage). Unit appears complete with integrated cooling and controls, as shown. Suitable for a wide range of industrial compressed air applications. Serial# 1125, built 2012.

MFR: Kaiser

Kaeser ASD 25 Industrial Rotary Screw Air Compressor with Sigma Control 2 | 25 H

Kaeser ASD 25 Industrial Rotary Screw Air Compressor with Sigma Control 2 | 25 HP | 112 CFM. Rated for 125 PSIG at 112 CFM. Unit is driven by a 25hp 3/60/208-230/460v 3550rpm motor. Equipped with a Kaeser Sigma Control 2 controller with RFID capability. Hours at time of inspection indicate approximately 42,000 run hours and 33,000 load hours. Enclosure is Type 1, designed for indoor industrial use. Nameplate data includes drive motor FLA of 63/59/30 amps (depending on voltage). Unit appears complete with integrated cooling and controls, as shown. Suitable for a wide range of industrial compressed air applications. Serial# 1124, built 2012.

MFR: Kaiser

Used Kaeser AS 25T Rotary Screw Air Compressor with Integrated Dryer | 125 PSIG,

Used Kaeser Rotary Screw Air Compressor, Model AS 25T. Includes integrated refrigerated Dryer. Rated 125psig at 111 CFM. Driven by a 25hp, 3/60/208-230/460 volt, 3560rpm motor. Tier 1 Sound Enclosure. Kaeser Sigma Controller. Serial # 1400, Built 2008.

MFR: Kaeser

Used Meprotec Komet Steril Inline vertical coloid mill. Constructed of 316 stainless steel. It has a 250 liter(66 gallon) mixing tank. This homogenizer is equipped with mechanical gap distance adj...

Used-Meprotec Komet Steril Inline vertical coloid mill. Constructed of 316 stainless steel. It has a 250 liter(66 gallon) mixing tank. This homogenizer is equipped with mechanical gap distance adjustment from 3 mm to 18 mm. Homogenizer has a 2" twist style impeller. Homogenizer also has a liquid seal system. Has a 2" sanitary discharge that goes to a pneumatically operated 3 way ball valve for discharge and recirculation options. Top has a 2" sanitary fitting for recirculating material, a 3" sanitary fitting for dry material infeed and a 2.5" sanitary fitting liquid material infeed. Unit is belt driven by 25 hp electric motor. Requires 460 vac 3 ph electrical supply. Hopper and mill are supported by 3" arms with load cells. Unit also has a pneumatic 2" 3 way diverter valve. No name plate data available. Manual available. Good Condition