Chemical Equipment

Used Walker 500-Gallon Jacketed Stainless Steel Mix Tank | Model PZ-ST | Heated Process Vessel

Used Walker 500-Gallon Jacketed Stainless Steel Mix Tank | Model PZ-ST | Heated Process Vessel. Jacket rated 100psi at 250 degrees F. Top mounted mixer driven by a 1hp 3/60/230/460v 1730rpm motor through reducer 55.17:1 ratio. Height 86" with agitator.

MFR: Walker

Used Chester Jensen X70N50 500 Gallon Jacketed Kettle – Stainless, Scrape Agitation, VSD, Food Grade

Used- Chester Jensen, Model: X70N50 500 Gallon Jacketed Tank (Kettle), Stainless Steel, With Scrape Agitation. Center discharge: 4'' reduced to 2'' tri-clamp (with valve). Top entry scrape agitator, Motor: 5 hp, 230/460 volt, 100 rpm approximately. Stainless steel control panel. Variable speed drive. Additional port for secondary mixer. Previous use: food application. Serial# 9806-P, built 1998. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Chester Jensen

Used – Cutler-Hammer 500/575 KVA Transformer – 3-Phase, 2300 Delta HV / 480Y-277 LV

Used Cutler-Hammer 500/575 KVA Transformer 3-Phase, 2300 Delta HV / 480Y-277 LV BIL 30KV. 3 phase 60 hertz. 177 Gallon fluid capacity. 10psi max at Positive & Negative Terminals. Serial# PAI-1049. 4790 total weight.

MFR: Cutler Hammer

Unused Hanson Tank Air Tank Skid – (2) 500 Gallon Vertical Tanks, ASME Rated

Unused- Hanson Tank Air Tank Skid Consisting of (2) 500 Gallon Vertical Tanks. Each tank rated 300 psig at 400 degrees F MAWP, -20 degrees F at 300 psig MDMT. ASME rated. With skirt and angle clips. Various connections. Serial# 457626, National Board# 220075, Built 2018.

Used 500 Gallon Vertical Air Receiver Tank – 165 PSI ASME – Samuel Pressure Vessel

Used Vertical Air Receiver Tank, carbon-steel ASME-certified pressure vessel manufactured by Samuel Pressure Vessel Group. Approximate 36" diameter x 108" straight side. Dished heads. The nameplate (NB 1050683) indicates MAWP 165 PSI at 400F and MDMT 20F at 165 PSI, with design data HD-176 and SH-187, built in 2023. The vessel features a cylindrical shell with welded elliptical heads, multiple threaded and flanged nozzles for inlet/outlet/process instrumentation, and a lower skirt base with side penetrations. It is externally coated in industrial blue enamel for outdoor service and integrated into a process piping system, likely functioning as a compressed-air or process-gas receiver, buffer tank, or filtration vessel.

Used 500 Gallon Compressed Air Tank – 36" x 108" – 165 PSI Rated

Used Air Receiver Tank, 500 Gallon, Vertical. Approximately 36" diameter x 108" straight side. Dished heads. ASME-code pressure vessel is manufactured by Samuel Pressure Vessel Group, with a U-stamp and 2023 fabrication year. The vessel is rated for 165 PSI at 400F, with an MDMT of 20F at 165 PSI. Nameplate data: HD 176 / SH 187, CRN M9775.5C, Part No. A10129. The unit features a welded cylindrical shell, threaded nozzles, and welded base supports with openings for piping. The exterior is coated blue for outdoor corrosion protection.

Schutte 44-60-301B-1 Circ-U-Flow Hammermill – 500 HP Industrial Grinder

Used Schutte 44 Series Circ-U-Flow hammermill, model 44-60-301B-1, serial number 2102057. Unit is equipped with approximately 3/8" thick hammers, infeed hopper with magnets, Benshaw control panel, and 500 HP motor. 44" Diameter x 60" wide rotor, approximately 6,600 square inches of screen area, hammer tip speed of approximately 20,700 ft/min. Actual throughput is dependent on material characteristics, moisture content, feed size, screen opening, and required finished particle size. Possible applications and suitable products include high-capacity industrial grinding and size reduction of compatible bulk materials, biomass, wood products, agricultural materials, and other products suitable for hammermill processing.

MFR: Schutte

Schutte 44 Series Industrial Hammer Mill with 1/2" Hammers

Used Schutte Circ-U-Flow hammermill, 44 Series, model 44-60-301B-1, serial number 2105014. Unit is equipped with approximately 1/2" thick hammers, control panel, and 500 HP motor and is currently not installed. 44" Diameter x 60" wide rotor, approximately 6,600 square inches of screen area, hammer tip speed of approximately 20,700 ft/min. Actual throughput is dependent on material characteristics, moisture content, feed size, screen opening, and desired finished particle size. Possible applications and suitable products include high-capacity industrial grinding and size reduction of compatible biomass, wood products, agricultural materials, and other bulk materials suitable for hammermill processing.

MFR: Schutte

Used Generac SD0500 500 kW Diesel Generator – 277/480V 3-Phase with Daewoo P180LE Engine

Used- Generac Diesel Generator, Model SD0500. Rated 500kW. 3 Phase, 277/480V. Daewoo Model P180LE engine. 10A UL Listed Battery Charger. 792 hours. Serial# 2083641.

MFR: Generac

Used Accudyne 500-Ton Heated Platen Hydraulic Shuttle Press – 36" x 36" Platens, 400°F, Rebuilt 2021

Used- Accudyne 500 Ton Heated Platen Hydraulic Shuttle Press. 36" x 36" platens, powered shuttle table, up-acting hydraulic cylinder, and separate programmable control panel with HMI. Press features a 20" main cylinder stroke, 20" daylight opening, and maximum operating temperature of 400 F. Hydraulic power unit is driven by a 20 HP, 1,800 RPM, 3-phase motor. Electrical data plate indicates 208 volts, 60 Hz, 3-phase power, 166 total amps, 35 kVA maximum power consumption, and 5 kA SCCR. Approximate machine weight is 27,000 lbs. Serial # 21004. Rebuilt in 2021. This heavy-duty heated platen press combines 500 tons of pressing capacity with a powered shuttle table for efficient loading and unloading between press cycles. Possible applications include compression molding, laminating, bonding, forming, and other heated pressing operations for composite, rubber, plastic, laminate, and similar products.

Used Industrial Filter & Pump 304 stainless vertical leaf filter. Type 122.332. Series 60-3.5-19. The filter has (19) 44" x 44" filter leaves with a total surface area of 500 sq ft and has a maximum ...

Used-Industrial Filter & Pump 304 stainless vertical leaf filter. Type 122.332. Series 60-3.5-19. The filter has (19) 44" x 44" filter leaves with a total surface area of 500 sq ft and has a maximum working pressure of 70 psi @ 180° F. Serial # F15401. Good condition Built 1970.

MFR: Industrial Filter

Used D&W Welding & Fab Co. stainless 500 gallon dimpled jacketed pressure vessel. National Board stamped for shell at FV, 75 PSI at 350 degree F and jacket for 150 PSI. Vessel built in 1972. 48" diam...

Used-D&W Welding & Fab Co. stainless 500 gallon dimpled jacketed pressure vessel. National Board stamped for shell at FV, 75 PSI at 350 degree F and jacket for 150 PSI. Vessel built in 1972. 48" diameter x 64" straight side with bottom and side dimpled jackets. Bottom has 2" valve. Top has one 16" x 12" manway, two 4" lap joint flange nozzles, two 2" lap joint flange and one 5" flange with Lightnin mixer Model N33G-33, serial number 727652, 1/3 HP 115 volt. Inside of vessel has four baffles. Four mounting chairs on the side.

MFR: D & W Welding