Chemical Equipment
Stock No.:
54687062Used Tolhurst Batch-O-Matic solid basket 48" basket centrifuge. Serial # T-99273. Used mainly with fine organic particulates. Stainless steel contact surfaces. Basket is 30" deep and has 5 flites th...
Used-Tolhurst Batch-O-Matic solid basket 48" basket centrifuge. Serial # T-99273. Used mainly with fine organic particulates. Stainless steel contact surfaces. Basket is 30" deep and has 5 flites that hold 7.25" of cake to the side of basket. Total cake volume is 16 cuft. Centrifuge is capable of handling product that weighs up to 66 lbs per cuft. Basket turns at 1080 rpm. The product is feed through the top via 2" pipe to bottom of cake area. It is need forced the basket wall with centrifugal force and is forced up and over the walls of the basket. The liquids are discharged through a 4" flanged fitting in bottom of unit. Solids are discharged through conical bottom to 6" outlet. Unit is equipped with five finger plow to clear cake material. Unit also has a CIP system. This unit is bottom driven and has center-slung suspension to handle unbalanced or liquid loads. The bowl is belt driven by hydraulic power unit. The hydraulic power unit provides 1100 psi turning at 1200 rpm with a 30 hp motor. Top has a 34" x 14" hinged access door. Unit requires 460 vac 3 ph electrical supply. May be good Parts machine.
MFR: Tolhurst
Stock No.:
54687063Used Tolhurst Batch-O-Matic solid basket 48" basket centrifuge. Serial # TA-15612. Used mainly with fine organic particulates. Stainless steel contact surfaces. Basket is 30" deep and has 5 flites t...
Used-Tolhurst Batch-O-Matic solid basket 48" basket centrifuge. Serial # TA-15612. Used mainly with fine organic particulates. Stainless steel contact surfaces. Basket is 30" deep and has 5 flites that hold 7.25" of cake to the side of basket. Total cake volume is 16 cuft. Centrifuge is capable of handling product that weighs up to 66 lbs per cuft. Basket turns at 1080 rpm. The product is feed through the top via 2" pipe to bottom of cake area. It is need forced the basket wall with centrifugal force and is forced up and over the walls of the basket. The liquids are discharged through a 4" flanged fitting in bottom of unit. Solids are discharged through connical bottom to 6" outlet. Unit is eqipped with five fingerd plow to clear cake material. Unit also has a CIP system. This unit is bottom driven and has center-slung suspension to handle unbalanced or liquid loads. The bowl is belt driven by hydrualic power unit. The hydraulic power unit provides 1100 psi turning at 1200 rpm with a 30 hp motor. Top has a 34" x 14" hinged access door. Unit requires 460 vac 3 ph electrical supply. Good Condition. (was rebuilt with in two years of the plant shutting down)
MFR: Tolhurst
Stock No.:
54687096Used 48 cu.ft. (estimated) Clow filter press. It is equipped with 52 each 1200 mm (47 5/8" x 47 5/8" x 2 1/8") non-gasketed recessed poly plates. This unit is sheathed with plastic for corrosive envi...
Used-48 cu.ft. (estimated) Clow filter press. It is equipped with 52 each 1200 mm (47 5/8" x 47 5/8" x 2 1/8") non-gasketed recessed poly plates. This unit is sheathed with plastic for corrosive environments. 4" center feed with 4 each, 2" corner returns. Built in plate shifter. Hydraulic closure via a 10 hp hydraulic power unit, 208-230/460 vac 3 ph power required. This unit was connected to a central control panel that controlled multiple machines. The control panel is not included.
MFR: Clow
Stock No.:
54469001Used Atlas Copco XAS 185 (JD) Trailered Air Compressor | 185 CFM Rotary Screw Diesel Unit
Used- Atlas Copco Trailered Rotary Screw Air Compressor, Model XAS 185 (JD). Maximum final pressure 123 PSIG at 185 CFM. Contains a 49 HP John Deere Engine. 3 cylinder. Maximum 2750 RPM. Has a 25 gallon fuel tank. 992 hours run, built 2007.
MFR: Atlas Copco
Stock No.:
54687011Used Krauss Maffei MT 1/200 316L Stainless Steel Mixer Vacuum Dryer
Used Krauss Maffei Mixer Vacuum Dryer MT, Model MT 1/200. Serial # 7098. National Board # 21424. Constructed of 316L stainless steel. Interior has polished surface. Conical vessel has a capacity of 49.43 cuft with working volume of 35.3 cuft. Dryer uses an 8" diameter inclined orbiting screw, driven by a 10 hp drive to gently agitate product while drying. Can dry particles up to 5 mm in size. Vessel is rated for Full Vacuum/150 psi @ 450 f on jacket and internal. Actual drying temperature maximum is 302 f. The top has an 18" manway with 6" sight glass, 18" flanged fitting, 4" sight glass, (2) 3" flanged fittings, (2) 2" flanged fittings, 6" flanged fittings and (2) 1" threaded fitting for the top jacket. The side has (2) 2" flanged fittings for the body jacket. The bottom has a 10" flanged discharge fitting with pneumatically operated flush mount valve and (2) 1" threaded fittings for bottom jacket.
MFR: Krauss Maffei
Stock No.:
47557001Used Brighton Corporation 49.7 Gallon Reactor – 316L Stainless Steel, Dimple Jacketed
Used- Brighton Corporation Reactor, 49.7 Gallon. 316L Stainless Steel, Vertical. 20" Diameter x 36" straight side. Removable top dished head, dished bottom. Internal rated 25 psi and Full Vacuum at 250 degrees F. 304 Stainless steel dimple jacket rated 25 psi and Full Vacuum at 250 degrees F. Openings top: (1) 4" for spray ball, (1) 4" with sight glass, (1) 3", (2) 1-1/2", (2) 1". 1-1/2" Center bottom outlet. (2) Side mounting brackets. Serial # B8432-3. National Board # 4299.
MFR: Brighton Corp
Stock No.:
40426004Unused Sonic Colloid Roto-Mill RM4 | 4" High-Shear Sanitary Colloid Mill (316L SS)
Unused Sonic Colloid Roto-Mill, Model RM4. 4" size. 316L stainless contact surfaces. 10-50 GPH gravity flow rate, 150-600 GPH pressure feed rate. Driven by a 5 HP, 3600 RPM, 3ph/230/460V motor. With controls. Mounted on cart with casters. Built 2024.
MFR: Sonic
Stock No.:
40426005Sonic RM4 Sanitary Colloid Mill | Unused 4" High-Shear Roto-Mill
Sonic RM4 Sanitary Colloid Mill | Unused 4" High-Shear Roto-Mill. 316L stainless contact surfaces. 10-50 GPH gravity flow rate, 150-600 GPH pressure feed rate. Driven by a 5 HP, 3600 RPM, 3ph/230/460V motor. With controls. Mounted on cart with casters. Built 2024.
MFR: Sonic
Stock No.:
40426006Unused Sonic RM4 Colloid Roto-Mill | High-Shear Inline Processing System
Unused Sonic RM4 Colloid Roto-Mill | High-Shear Inline Processing System. 4" size. 316L stainless contact surfaces. 10-50 GPH gravity flow rate, 150-600 GPH pressure feed rate. Driven by a 5 HP, 3600 RPM, 3ph/230/460V motor. With controls. Mounted on cart with casters. Built 2024.
MFR: Sonic
Stock No.:
40426007Sonic RM4 Mobile Colloid Mill | 4" High-Shear Emulsification System
Sonic RM4 Mobile Colloid Mill | 4" High-Shear Emulsification System. 316L stainless contact surfaces. 10-50 GPH gravity flow rate, 150-600 GPH pressure feed rate. Driven by a 5 HP, 3600 RPM, 3ph/230/460V motor. With controls. Mounted on cart with casters. Built 2024.
MFR: Sonic
Stock No.:
42948001Used Alloy Products 5-Gallon 316L Stainless Steel Pressure Tank – 135 PSI, Vertical
Used- Alloy Products Pressure Tank, Approximately 5 Gallon, 316L Stainless Steel, Vertical. 9' Diameter x 14" straight side. Dished top and bottom. Polished internal rated 135 psi at 20 to 135 degress F. Openings top (2) 7/8, (2) 3/8, 5 x 6 oval, no cover. Rubber skirt mounted.
MFR: Alloy Products
