Chemical Equipment

Used 2,400 Gallon Stainless Steel Single-Wall Storage Tank

Used- 2,400 Gallon Storage Tank, Stainless Steel Single Wall, measures 69" diameter X 168" high. Includes side bottom manway with bottom outlet.

Used Stainless Steel Single Wall 2,400 Gallon Storage Tank

Used- 304 Stainless Steel Single Wall 2,400 Gallon Storage Tank, measures 69" diameter X 168" high. Includes side bottom manway with bottom outlet.

2,400 Square Feet Alfa Laval Spiral Heat Exchanger

Used- Alfa Laval Thermal Horizontal Spiral Heat Exchanger, 2400 Square Feet, Model 1-H. 316 Stainless steel product contact areas. Hot and cold side rated 125 psi at 250 degrees F. Carbon steel removable heads with 316 stainless steel clad. Openings (4) 4". Mounted on carbon steel saddles. National Board# 13862, Serial# 18229.

MFR: Alfa Laval

Used SPX Waukesha CMP Colloid Mill | Stainless Steel High Shear Milling System

Used- SPX Waukesha model CMP stainless steel horizontal colloid mill. Serial number 1000002960246. It has a conical grooved rotor and stator. The inlet and outlet are 2" sanitary threaded. This unit is all mounted on a stainless steel base. The mill is driven by a 25 hp electric motor. 575 vac 3 ph power required.

MFR: SPX

Used Waukesha MS Colloid Mill | Stainless Steel High Shear Milling System

Used Waukesha MS Colloid Mill | Stainless Steel High Shear Milling System. Serial number 1000002790489. It has a conical grooved rotor and stator. The inlet and outlet are 2" sanitary threaded. This unit is all mounted on a stainless steel base. The mill is driven by a 25 hp, 3530 rpm electric motor. 460 vac 3 ph power required.

MFR: Waukesha

Used Alfa Laval / Sharples PM-70000 Super-D-Canter Solid bowl Decanter Centrifuge

Used- Alfa Laval / Sharples PM-70000 Super-D-Canter Solid bowl Decanter Centrifuge, (same size as a P-5400), stainless steel construction (product contact areas). 5" single lead conveyor, base, casing, gearbox, 200 HP main drive motor, lubrication pump system.

MFR: Sharples

Used Fryma Koruma MZ-130/B Toothed Colloid Mill | 25 HP | 700–7000 L/hr | Sanitary | High Shear Mixer

Used- Fryma Koruma Toothed Colloid Mill, Model MZ-130/B, dispersing and homogenizing liquid to highly viscous materials. Capacity range approx.: 700 - 7,000 L/hr. Product fineness approx.: 100 - 500um. 18.5 kw (25 HP), 3 phase, 60 cycle, 208 volts on portable cart with control panel. High Shear Mixer. Last used in sanitary Pharmaceutical plant.

MFR: Fryma

Used Hoffland 25 Cu Ft Air/Hydraulic Filter Press | 50 Plate 800mm Dewatering System

Used- Hoffland Air/Hydraulic Filter Press, 25 Cubic Foot. (50) 800mm plates. Gasketed. CPVC Flanged Outlets. 169" Between Legs. OAD: 221"L x 42"W x 66"H.

MFR: Hoffland

Used Alfa Laval NX-6541 "SanX" Solid Bowl Decanter Centrifuge – Built 2020

Used- Alfa Laval NX-6541 "Sanx" solid bowl decanter centrifuge, SanX model, stainless steel construction (product contact areas), max bowl speed 3100 rpm. 25" diameter x 98.75" long bowl. 360 degree solid discharge ports, 9" single lead conveyor , base, casing, gearbox 127/1 ratio, 75 hp main drive motor, 30 hp backdrive motor, control (460/3/60). Built 2020

MFR: Alfa Laval

Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill – 25 HP Pharmaceutical & Food Grade Mill

Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill 25 HP Pharmaceutical & Food Grade Mill. Chamber: 12.5" wide x 15.37" long, with center screen support bar, screens not included. 32 milling blades, fixed blunt flat-edge/knife edge, reversible. 10" flange inlet. 16" x 19" oval discharge with banding groove, 75.5" above base elevation. Driven by a 25 HP, 3/60/230/460 Volt, 1770 RPM motor. Welded stainless steel portable base frame (4" box tubing), 42"W X 48"L. Serial# 9084.

MFR: Fitzpatrick

Used Roark Enterprises 25-Gallon Stainless Steel Receiver Tank – 150 PSI, Vacuum Rated

Used- Roark Enterprises 25 Gallon Receiver Tank, Stainless Steel Construction. Approximately 16" diameter x 32" straight side, dish top and bottom. Internal rated 150 psi and full vacuum at 150 degrees F. Serial# 95.709.ME1, National Board# 460.

MFR: Roark Enterprises

25 HP Industrial Blower by IATC – 18,000 CFM, Model BISW 365-79 CL2/B

Used- Industrial Air Technology Corp. Blower, Model BISW 365-79 CL2/B 360 CW. 18000 CFM, Serial # 60531-A. Driven by a 25 HP, 3/60/208-230/480V, 1180 RPM motor.