Chemical Equipment

Used Goodnature Juice and Cider Press, Model SX280. 450 gallons/hour Capacity

Used- Goodnature Juice and Cider Press, Model SX280. Rated for output of up to 450 gallons/hour (1700 liters/hour), 2-3 tons/hour. Press features "squeezebox" design plates (28") constructed of hard plastic. On/Off and Forward/Reverse Controls. 3/60/208V electrical requirements. Serial # 1088.

MFR: Goodnature

Tecnetics Industries Tecweigh Dual Volumetric Feeder System – Used

Used- Tecnetics Industries Tecweigh Dual Volumetric Feeder System with Hoppers. Includes (2) Tecweigh volumetric feeder with "Flex-Feed" hopper system, model E12, 1.2 cubic foot hopper capacity, driven by 3/4hp motor. Best Engineering Hooper, approximate 46" diameter. Both Feeder/Hoppers mounted on frame.

Used Tecweigh E12 Volumetric Feeder with Flex-Feed Hopper – Dual System

Used- Tecnetics Industries Dual Volumetric Tecweigh Feeder System with Hoppers. Includes (2) Tecweigh volumetric feeder with "Flex-Feed" hopper system, model E12, 1.2 cubic foot hopper capacity, driven by 3/4hp motor. Best Engineering Hooper, approximate 46" diameter. Both Feeder/Hoppers mounted on frame.

MFR: Technetics

Used Industrial Volumetric Feeder System – Tecnetics Tecweigh E12 with Hoppers

Used- Tecnetics Industries Tecweigh Dual Hopper Dual Volumetric Feeder System. Includes (2) Tecweigh volumetric feeder with "Flex-Feed" hopper system, model E12, 1.2 cubic foot hopper capacity, driven by 3/4hp motor. Best Engineering Hooper, approximate 46" diameter. Both Feeder/Hoppers mounted on frame.

MFR: Technetics

Used Tecnetics Tecweigh Volumetric Feeder – Model E-28 with Flex-Feed Hopper

Used- Tecnetics Industries Tecweigh Volumetric Feeder, Model E-28. Has Flex-Feed hopper system 2.8 cubic foot capacity. Screw approximate 6.5" diameter x 48" long. Driven by a 1.5hp, 1750 rpm motor. Serial# 8190C9902.

MFR: Technetics

Used Thayer Gravimetric Belt Feeder | Precision Weighing & Feeding System for Industrial Applications

Used- Thayer Gravimetric Belt Feeder. Approximate 15" wide x 42" long feed belt. Includes PI-164 programmable integrator, motorized rotary valve at belt discharge. Feeder mounted on a stand supplying approximate 42" discharge height, 12" from rotary valve. Serial# 164-1901.

MFR: Thayer

Used Thermo Fisher Scientific ULT185-5-A Ultra-Low Temperature Freezer – -80°C Compact Laboratory Freezer

Used- Thermo Fisher Scientific ULT185-5-A ultra-low temperature freezer with an operating temperature of negative 80 degrees Celsius and approximately 1.71.8 cu. ft. (50 L) of storage capacity. Designed as a compact benchtop or undercounter unit, this freezer provides ultra-low temperature storage while minimizing laboratory footprint, making it well suited for laboratories, research facilities, and clinical environments where space is limited.

Used Thermo Scientific Series 2 Water Jacketed CO2 Incubator – 184L (6.5 cu. Ft.) Capacity

Used- Thermo Scientific Series 2 Water Jacketed C02 Incubator, 184L (6.5 cu. Ft.) Capacity. Inside Glass door, 21-1/2" wide x 27" tall x 19-1/2" deep stainless steel chamber. Temperature range 5C above ambient up to 55C (131F)

MFR: Thermo Scientific

Used Thermo Revco Upright Refrigerator, Model REL3004A21, 29.2 Cu ft capacity

Used- Thermo Revco Upright Refrigerator, Model REL3004A21. 12oz charge of R-134A Refrigerant. 29.2 Cu ft capacity, 1 to 8 Degrees C Temperature Range. Approximately 29" wide x 53" tall x 26" deep chamber, with (3) 29" wide x 26" deep wire shelves. 115V, 60hz power requirements. Serial# P14R-119636-PR

MFR: Thermo Scientific

Used Travaini TRHE 32-45/C/RZ Liquid Ring Vacuum Pump – CO2 Roughing Pump System with Intervac Booster

Used- Travaini Liquid Ring Vacuum Pump, Model TRHE 32-45/C/RZ. Rated 28.8" vacuum at 11 cfm. 3 HP, 3450 RPM, 3/60/230/460V motor. With Fenwal Thermostat and Model PLT3206/5CGF Intervac pump. Approx. OAD: 60" L x 40" W x 70" H. Located 2629 Seventh Street Berkeley CA 94710; Can load; $4,000 PRD; Seller is working on getting us a video; Can accommodate inspection; no docs; was previously used as "CO2 Vacuum Roughing Pump"

MFR: Travaini

Used Thermatool Tube Cutting Machine - 2”-4.5” OD, ABB Drives, Scrap Conveyors

Used- Thermatool Tube Cut-Off Machine. OD Range: 2"-4.5", Max Wall Diameter: .235". Max Speed 250 FPM, Hydraulic Accelerator Hydraulic Clutch, Encoder, Two Scrap Goose Neck Conveyors Unico Controller, ABB Drives, spare cut off die.

Used Ultrasonic Systems Prism 400 Spray Coater – 400mm x 400mm | 600mm/s | Tilt & Rotation | Built 2023

Used- Ultrasonic Systems Spray Coater, Model Prism 400. 600mm/second (20"/sec) coating speed; 400mm x 400mm x 125mm (15.75" x 15.75" x 4.72") application area; Up to 45 degrees in two directions tilt motion; 0-90 or 0-180 degree theta rotation range; Lead screw, stepper drive Z motion; Precision ball screw X/Y platform; 16" max. X and Y axis stroke; 0-150 degrees C (32-302 degrees F) heat plate set point, configurable up to 200 degrees C (392 degrees F). With stand. 1/50-60/220V. Built 2023.

MFR: Ultrasonic