Chemical Equipment

Used Park Industries Fastback Flat Edge Polisher | Single Pass Stone Edge Finisher

Used- Park Industries Flat Edge Polisher, Model Fastback. Single-pass edge finisher. Feed speed of 12" min. Works with material that is 1 - 6 cm thick. 3/60/240V. 100 Full load Amps. Serial # 206829.

Used Prater Vibratory Screener/Cleaner – Model VS2-36-1EX – For Parts Only

Used- Prater Vibratory Screener/Cleaner. Model VS2-36-1EX. For Parts Only.

MFR: Prater

Used Rite Boiler Co. Model 105S Natural Gas-Fired Low Pressure Steam Boiler – 19 BHP – Built 2020

Used- Rite Boiler Co. Natural Gas-Fired Steam Boiler, Model 105S. Compact, low-pressure steam boiler designed to provide reliable and efficient steam generation for a wide range of industrial and commercial applications. Rated at 798,000 BTUH input, 15 PSI maximum allowable working pressure, 19 boiler horsepower (BHP), a 250 degrees F maximum operating temperature, and 101 sq. ft. of heating surface. Engineered for dependable performance in process heating, sanitation, humidification, and other low-pressure steam duties. The boiler operates on natural gas with a 14" W.C. maximum fuel supply pressure, 7" W.C. minimum supply pressure at flow, 3.5" W.C. maximum manifold gas pressure, and 1.5" W.C. minimum manifold gas pressure. Electrical requirements are 120 Volt, single phase, 60 Hz. Designed for indoor installation only, Serial # 33706., National Board # 19478, Built 2020.

MFR: Rite

Used ETMW Enterprises Triple Roller Bar Dough Mixer – 75L, Stainless Steel, Variable Speed

Used- ETMW Enterprises Triple Roller Bar Dough Mixer, Stainless Steel. Approximate 75 Liter. Jacketed bowl 18" front to back x 15" left to right x approximate 22" deep. Triple bar agitator, (1) fixed roller bar, counter balanced top cover, manual crank bowl tilt. Driven by a 10hp, 3/60/230/460 volt, variable speed gear motor, ratio 23.40 to 1, output rpm 26-157. Includes an operator control panel. Machine # 13002.

MFR: ETMW Enterprises

Rotex Triple Deck Screener – Model 403A-AL-MS, 30" × 60", 4 Outlets, w/ Mezzanine & Auger (Used)

Rotex Triple Deck Screener Model 403A-AL-MS with 30" x 60" screens, designed for efficient multi-stage product separation and classification. Unit features four discharge outlets, aluminum cover and screen frames for reduced weight and corrosion resistance, automatic screen tensioning, and a mild steel pan and box frame for structural durability. Equipped with a 2 hp motor rated for 208-230/460 V, 1,800 rpm. Screen weights are approximately 145 lbs on the upper deck and 45 lbs on the lower deck. Serial number R360888. Package includes a walk-around mezzanine and auger, providing a complete material handling and screening setup.

MFR: Rotex

Pre-Owned Rotex Model 242A ALSS Screener – 24" x 48" Stainless Steel Deck

Used- Rotex Screener, Model 242A ALSS, 2 Surface Model. 8 Square Foot Nominal area per surface. 304 Stainless Steel, 24" wide x 48" nominal screen size per surface (in.). Bottom stainless steel deck has 3/8" diameter holes. Aluminum cover with a 10", and 3-1/2" opening. Driven by a 1hp 3/60/208-230/460v 1730rpm motor. (2) 3-1/2" end bottom discharges, with 50" discharge height. Serial# R210886. Mounted on a carbon steel frame. Upper WT 102. Lower WT 46.

MFR: Rotex

Used Rotex Stainless Steel Sanitary Screener, Model #431-SAN-SS/SS. 40" wide x 84" long single deck. The inlet is 8" diameter. The unit has a 6” and an 8" diameter outlet. Upper Wt. 144, Lower Wt. 5...

Used-Rotex Stainless Steel Sanitary Screener, Model #431-SAN-SS/SS. 40" wide x 84" long single deck. The inlet is 8" diameter. The unit has a 6” and an 8" diameter outlet. Upper Wt. 144, Lower Wt. 55. Clamp down SS top cover, 2 bottom outlets. Approximately 24 sq.ft. screen area. The shaker is driven by 3 hp 1715 rpm motor and belt drive system. Requires 230/460v 3 ph electrical source. Mounted on a carbon steel frame. Serial #190172. Overall 132” x 60” x 38”.

MFR: Rotex

Used S.G. Frantz Co. "FerroFilter" electromagnetic separator. Model number 73F2. Serial number E1512. It is designed to separate magnetic materials from heavy slurries at a maximum flow rate of 1,300...

Used-S.G. Frantz Co. "FerroFilter" electromagnetic separator. Model number 73F2. Serial number E1512. It is designed to separate magnetic materials from heavy slurries at a maximum flow rate of 1,300 to 4,000 gph. It has stainless steel contact parts and a swing back lid for cleanout. The cooling jacket is rated for 150 psi. This unit has a 3" threaded inlet and a 3" threaded outlet. 115 vdc 45 amps of power required. This unit sits on a carbon steel stand.

Used Hewitt Robins 6' x 24' V14 Screening Plant – Model VSG-05214-01 – 3-Size Separation, Road Ready

Used- Hewitt Robins 6' x 24' V14 Screening Plant; Model VSG-05214-01; Runs on 3 phase 30 hp motor. Makes 3 sizes, current screens are heavy duty 2" screen on top deck and 3/8" Veno-harp screens set on lower deck. Fines fall to bottom discharge wide belt conveyor via a 10 hp motor; Collapses for hauling. New tires. Pulls with 5th wheel. 10 wide x 30 long x 134" high for road transport.; 20" x 36" magnet for conveyor head pulley with 2-15/16" Shaft; Last used for soft powder material.

MFR: Hewitt Robbins

Pharmaceutical Sharples SP-725 Super Helix Centrifuge

Unused- Sharples SP-725 Super Helix Centrifuge, 316/317 stainless steel. Maximum bowl speed 9000 rpm, 10,000 x "G" force, sanitary design, all contact surfaces polished and free draining, cooling jacket, clean-in-place capability, steam sterilizable to 15 psig at 260 degree, full containment for handling biological or sterile materials, 10 hp main drive with 1 hp backdrive motor. Distinguishing features: sanitary design with polished finishes, biohazard containment, steam sterilized for aseptic operation clean-in-place capabilities, continuous operation. Ideal for biotech, pharmaceutical and food applications.

MFR: Sharples

Used HTC Hydraulic Shear – 1/2" Mild Steel, 3/8" Stainless Capacity – Industrial Plate Cutting

Used- HTC Shear. 1/2" mild steel cutting capacity; 3/8" stainless steel cutting capacity. 3/230-460V. Approx. OAD: 12.5 L x 8.33 W x 9.3 H.

MFR: HTC

Used Siebtechnik H-400 Contrubex Screening Centrifuge – 15 m³/h Capacity

Used- Siebtecknik H-400 Contrubex Screening Centrifuge. 316 Stainless Steel construction (product contact areas), 15 m3/h Feed Capacity, max bowl speed 2850 rpm, base, casing, feed pipe, rinse pipe, 20hp drive motor, safety guards .

MFR: Siebtechnik