Chemical Equipment

Used Carver RS6-A 3X2X6 DI Vacuum Pump – 40HP, High-Speed Industrial Pump

Used- Carver Vacuum Pump, Model RS6-A 3X2X6 DI. Driven by a 40hp, 3/60/230/460 volt, 3545rpm motor. Base mounted. Built 2022

MFR: Carver

Used Cepheid GeneXpert System with GX-Hub & IVD Computer Package – Molecular Diagnostic PCR Testing Platform

Used- Cepheid GeneXpert system with GX-Hub and IVD computer package including the GX-Hub, Cepheid IVD touchscreen workstation, GeneXpert Dx / IVD operating software and licensing, and associated cables, interface hardware, and accessories. This configuration provides the primary system hardware together with the dedicated IVD computer and the required connection components as configured.

Used Cleaver Brooks Steam Boiler, Model CB-100-70-150ST. Rated 2,343,000 BTU/hour. 150 PSI max. working pressure. 70 HP. 3/60/230V. Serial# T3376-1-1, Built 2012.

Used- Cleaver Brooks Steam Boiler, Model CB-100-70-150ST. Rated 2,343,000 BTU/hour. 150 PSI max. working pressure. 70 HP. 3/60/230V. Serial# T3376-1-1, Built 2012.

MFR: Cleaver Brooks

Used Weldomat AG CH3-2437 Contact Welding Machine – Dual Units | 600 Contacts/Min | Tape & Wire Welding

Used- Weldomat Automatic Contact Welding Machine with (2) Welding Units; Model AG CH3-2437;Suitable for welding solid and bimetal contacts off tape reel onto stip; Up to 600 contacts per minute; 300 contacts per welding unit; Horizontal tape fee; (2) welding units in machine; Tape width 1.20-3.50mm; tape height 0.30-1.00mm; cross section 0.05-2.60 square mm; round wire 1.00-2.20mm; range of contact length 0.60-3.50mm

Used CJRTec 100 Ton CNC Conveyor Beam Press – 63" x 50" Table | Die Mount System, Waste Recovery | 2015

Used- CJRTec 100 Ton CNC Conveyor Beam Press/Die Press; Extended Table 63" x 50"; 2 Roll Pre-Feed Stand; Waste Recovery Cart; Die Mounting System. Mfg. 2015.

Used Herr-Voss Coil Line Arbor with Coil Car – 10,000 lb Capacity | 18–24" Coil ID | Control Box Included

Used- Herr-Voss Coil Line Arbor and Coil Car; 18-24" coil ID capability; 10,000 pound capacity, arbor moves back and forward to adjust for camber; Includes control box for Coil Car and Paper winder.

Used Cole-Parmer 7554-90 Peristaltic Pump – Includes #1718-21 Pump Head | Process Equipment

Used- Cole-Parmer 7554-90 Peristaltic Pump, With #1718-21 Head.

MFR: Cole Parmer

Used Vincent CP-6 Horizontal Screw Press – 6" Diameter Dewatering Press with 5 HP Drive, Refurbished Available

Used Vincent CP-6 Horizontal Screw Press 6" Diameter Dewatering Press with 5 HP Drive, Refurbished Available. Approximately 6'' diameter x 32'' long screw. Approximate capacity 300-1000 pounds per hour, 20 rpm screw. Driven by a 5 HP, 3/60/230/460V Nord motor. Fed through reducer, ratio 68.63:1. With 320 micron perforated screen. Serial #11384-C.

MFR: Vincent

Used Vincent CP-6 Horizontal Screw Press – 6" Dewatering Press, 300–1,000 Lb/Hr

Used- Vincent Horizontal Screw Press, Model CP-6. 6" diameter x 32" screw. Approximate capacity 300-1000 pounds per hour. 20 rpm screw. Driven by a 5 HP, 3/60/230/460V Nord motor. Fed through reducer, ratio 91.81:1. With 152 micron perforated screen. Serial #14375-D. Built 2019.

MFR: Vincent

Industrial Flow Meter - Micro Motion D100S-SS, 48 GPM, 400 lb/min

Used- Micro Motion Flow Meter, Model D100S-SS. 316 Stainless Steel Product Contact Areas. Rated volume 0 to 48 gallons per minute, mass 0 to 400 pounds per minute. 1" inlet/outlet, temp range: -40 degrees C to 60 degrees C. Tube pressure 2250 max.

MFR: Micro Motion

Used Cornell Versator Deaerator / Defoamer – Model D-26 (Pharmaceutical Service)

Used Cornell Versator Deaerator / Defoamer Model D-26 (Pharmaceutical Service). Stainless steel contact parts. Driven by 25 HP, 230/460 v, 1770 RPM motor mounted on stainless steel base with 7.5 HP Model LT 0170 Busch vacuum pump and (2) Teco controllers. Last used in sanitary application in pharmaceutical plant.

MFR: Cornell

Used Cornell Industrial Versator Deaerator / Defoamer – Model D-26 (Explosion Proof)

Used Cornell Industrial Versator Deaerator / Defoamer Model D-26 (Explosion Proof). Stainless steel contact parts. Driven by explosion proof, 15 HP, 230/460V, 1765 RPM motor mounted on base with 7.5 HP Model LT0170 Busch vacuum pump. Last used in sanitary application in pharmaceutical plant.

MFR: Cornell