Cannabis Industry Equipment

High-Capacity Sullair Regenerative Air Dryer – Model DMD-40

High-Capacity Sullair Regenerative Air Dryer Model DMD-40, Unused in Box. Sullair Part Number 02250244-035. Vessel Diameter 5", Vessel Height 40", Vessel Thickness 1/3". Purge Exhaust Muffler 3/4". Inlet-Outlet Connection - Inches 1 1/2" NPT; Relief Valve Setting (psi) 200; Bed Velocity (fpm) 60; Sound Max dbA 85; Purge Source Dry Air; Purge Adjust CHECK VALVE; NEMA Cycle (Min) 5 min; Drying time (Min) 2.5 minutes; Regeneration Time (Min) 2 minutes; Repressurization Time (Min) 30 seconds; PERFORMANCE DATA: MAX Ambient Temp (Deg. F/ Deg. C) 122/50; MIN Ambient Temp (Deg. F/ Deg. C) 34 / 1.6 ; MAX Inlet Temp (Deg. F/ Deg. C) 122/50; Max Rated Air Flow at 100 Deg. F (38 Deg. C) ; Inlet, 100 psig (7 barg) and 100 Deg. F (38 Deg. C) Amb 40; Dryer Delta P 2; MIN Pressure (psi/bar) 58 / 4.0; MAX Pressure (psi/bar) 200 / 16; AVG Purge Rate (at -40 Deg. F) 15%; AVG Purge Rate (at -100 Deg. F) 20%; ELECTRICAL DATA: Standard Voltage 80-240V/ 50-60Hz; Full Load Amps 1; MIN. Circuit Ampacity 2; Input Power kW 0.075; Unit Average kW 0.06; DIMENSIONS & WEIGHT DATA: Single Vessel Desiccant-Lbs 20.9; Ship Weight 164.5; Length-inches 16.1; Width-inches 17.7; Height-inches 49.2; UNIT Weight-lbs 143; Total Desiccant (lbs) 41.8.Serial# 4318MD00599

MFR: Sullair

Factory-Sealed Sullair Air Dryer – Model DMD-40

Factory-Sealed Sullair Air Dryer Model DMD-40. Sullair Regenerative Air Dryer Product Series Desiccant Modular Dryer, Model DMD-40, Sullair Part Number 02250244-035. Vessel Diameter 5", Vessel Height 40", Vessel Thickness 1/3". Purge Exhaust Muffler 3/4". Inlet-Outlet Connection - Inches 1 1/2" NPT; Relief Valve Setting (psi) 200; Bed Velocity (fpm) 60; Sound Max dbA 85; Purge Source Dry Air; Purge Adjust CHECK VALVE; NEMA Cycle (Min) 5 min; Drying time (Min) 2.5 minutes; Regeneration Time (Min) 2 minutes; Repressurization Time (Min) 30 seconds; PERFORMANCE DATA: MAX Ambient Temp (Deg. F/ Deg. C) 122/50; MIN Ambient Temp (Deg. F/ Deg. C) 34 / 1.6 ; MAX Inlet Temp (Deg. F/ Deg. C) 122/50; Max Rated Air Flow at 100 Deg. F (38 Deg. C) ; Inlet, 100 psig (7 barg) and 100 Deg. F (38 Deg. C) Amb 40; Dryer Delta P 2; MIN Pressure (psi/bar) 58 / 4.0; MAX Pressure (psi/bar) 200 / 16; AVG Purge Rate (at -40 Deg. F) 15%; AVG Purge Rate (at -100 Deg. F) 20%; ELECTRICAL DATA: Standard Voltage 80-240V/ 50-60Hz; Full Load Amps 1; MIN. Circuit Ampacity 2; Input Power kW 0.075; Unit Average kW 0.06; DIMENSIONS & WEIGHT DATA: Single Vessel Desiccant-Lbs 20.9; Ship Weight 164.5; Length-inches 16.1; Width-inches 17.7; Height-inches 49.2; UNIT Weight-lbs 143; Total Desiccant (lbs) 41.8.Serial# 4318MD00596

MFR: Sullair

Used Great Western QA Series In-Line Circular Sifter and Enclosure. Approximate 24" diameter. Approximate 4 sieves. Top inlet. Bottom outlet. Mounted inside frame.

Used- Great Western QA Series In-Line Circular Sifter and Enclosure. Approximate 24" diameter. Approximate 4 sieves. Top inlet. Bottom outlet. Mounted inside frame.

MFR: Great Western

Used Stainless Steel Sanitary Vibratory Scale Feeder – 132” x 24” Dimple Pan | Rotary Scale Feed | Poultry

Used-Stainless Steel Sanitary Vibratory Scale Feeder; Dimple pan measures 132 inches long X 24 inches wide X 10 inches deep; Infeed height 36 inches; Discharge height 32 inches; Overall dimensions are 132 inches long X 34 inches wide X 43 inches high; Last used to feed a rotary scale doing chicken breasts.

Used Waukesha Cherry-Burrell Thermutator – Model 624DE | 400 PSI | 400°F | Sanitary Heat Exchanger | Dairy Grade

Used- Waukesha Cherry Burrell Thermutator Model 624DE; Product 400 PSI, 400 deg F; Media 250 PSI, 400 deg F; complete with start/stop controls; Overall dimensions 72 inches wide X 72 inches long X 30 inches high; Last used in a dairy application.

MFR: Cherry Burrell

Unused Stancor S3000HH Submersible Dewatering Pump – 30HP, 4” NPT Discharge

Unused - Stancor High Head Submersible Dewatering Pump, Model S3000HH. ESA Approved. 575V / 30A / 30HP / 3 Phase. Maximum Volumetric Flow Rate: 500 US gpm, Maximum Head: 380 feet, Discharge: 4" NPT. Weight: 320 lbs - Dimensions (Diameter x Height): 16-1/8" x 39-1/8".418. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Unused Stancor S3000HH High Head Submersible Dewatering Pump – 30HP, 500 GPM

Unused - Stancor Model S3000HH High Head Submersible Dewatering Pump. ESA Approved. 575V / 30A / 30HP / 3 Phase. Maximum Volumetric Flow Rate: 500 US gpm, Maximum Head: 380 feet, Discharge: 4" NPT. Weight: 320 lbs - Dimensions (Diameter x Height): 16-1/8" x 39-1/8".418. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Buy Used Cherry Burrell Tank – Industrial Storage & Processing

Used- Cherry Burrell Tank, Stainless Steel, Vertical. Flat open top. Provision for side entering clamp on agitator, no agitator. Bottom outlet. Mounted on (4) legs. Serial# E-227-92.

MFR: Cherry Burrell

Used Bertoli Giotto PX32011 High Pressure Pump – Stainless Steel | 3/60/460V | Baby Food Grade Application

Used- Bertoli Giotto Series Model PX32011 Stainless Steel High Pressure Pump. Last used in baby food nutritional operation. 3/60/460V

Used Storage Bin, 304 Stainless Steel, 600 gallons

Used- Storage Bin, 304 Stainless Steel, Approximately 600 gallons, Vertical. Approximately 47" diameter x 76" straight side, 32" long cone. Dish Top, Coned Bottom. Openings top: 16" manway with (2) 1-1/2", 1" threaded openings on flange, (2) 4" with sight glass, 2-1/2" side top opening. 16" Diameter center bottom outlet. Side lug mounted.

Used Evoqua/Siemens 1500mm Filter Press – Heavy-Duty Industrial Filtration

Used- Evoqua/Siemens Model 1500N32-64/90-125/175SYLC Automatic Filter Press. Features (65) 1500 mm x 1500 mm (approximately 60" x 60") sidebar suspended filter plates with automatic plate mover/plate shifter for reduced manual handling. Equipped with Siemens PLC-based controls and CNC-style automation for automated cycle control. Heavy-duty construction with an approximate structural weight of 52,000 lbs. Manufactured in 2008. Suitable for municipal and industrial sludge dewatering, mining and mineral slurry dewatering, chemical and specialty chemical filtration, food and beverage process and by-product filtration, and pulp and paper slurry and wastewater treatment. Designed for high-capacity solid/liquid separation in demanding industrial applications.

MFR: Siemens Allis

OG-375 oxygen concentrator

Used- OG-375 oxygen concentrator Industrial design uses steel zeolite towers and rebuildable solenoid valves for a easy to maintain system that will never wear out or become obsolete. Features Produces 375 SCFH oxygen at up to 45 PSI Industrial heavy-duty design and quality oxygen concentrator Energy efficient oxygen concentrators require less compressed air for operation High oxygen outlet pressure 45 PSI standard, up to 65 PSI outlet pressure available Completely rebuild-able and easy to maintain design will offer many years of operation More Information Weight 1.35 lbs (0.61 kg) Dimensions 30" x 36" x 84" (76.2 x 91.4 x 213.4 cm) LxWxH Warranty 1 Year Max Pressure 45 PSI (3.16 Bar) Higher pressure systems available Oxygen Connection 3/8-inch NPT Inlet/Outlet Connections 3/8-inch NPT Integrated Compressor No 68 CFM @ 90 PSI required Oxygen Flow Rate 176.98 LPM (375 SCFH) The OG-375 will require an air tank and an oxygen tank for proper operation.