Cannabis Industry Equipment
Stock No.:
53393007Atlas Copco GA30+ Rotary Screw Compressor – 210 CFM, 40 HP Industrial Air System
Atlas Copco GA30+ Rotary Screw Compressor 210 CFM, 40 HP Industrial Air System. Approximately 109psig max working pressure, 210 cfm capacity. Driven by a 30kw (40hp) motor. Mounted Control Panel.
MFR: Atlas Copco
Stock No.:
54100001GEA Ecoflex VT10 Plate Heat Exchanger For Sale – 145 PSI, 212°F Rated – Approx.
Used- GEA Ecoflex GmbH Plate Heat Exchanger, Model VT10 CDS-17. Approximately 40 square foot area. Approximate (44) Stainless steel plates 31" x 8-1/2" wide. Operating pressure 0 to 145 psi (0 to 10 bar). Operating temperature 32 to 212 degrees F (0 to 100 degrees C). 2" Inlet/outlets. Mounted in an expandable frame. Serial# 169/16856.
Stock No.:
54249001Used Kason K40-1-SS Vibroscreen Circular Sifter | 40" SS Single-Deck | 75 lbs/min | XP Motor | Built 2023
Used Kason K40-1-SS Vibroscreen Circular Sifter | 40" SS Single-Deck | 75 lbs/min | XP Motor | Built 2023. 304 stainless steel construction. Single deck, double separation. 75 lbs/min maximum sift rate. Stainless steel top cover. 3ph/230-460V, 1200 RPM XP motor. Built 2023. Previously used for flour.
MFR: Kason
Stock No.:
54512006Unused Admix Rotosolver 250RS175 40 HP High-Shear Mixer
Unused Admix Rotosolver tote-base high-shear mixer, model 250RS175, constructed with 316 stainless steel wetted parts finished to 30 Ra. Unit is equipped with a 40 HP, 1,750 RPM explosion-proof motor rated for 3-phase, 60 Hz, 230/460V electrical service and a nominal shaft speed of 1,750 RPM. Mixer features an approximately 3.15" diameter shaft, 6.89" diameter threaded Rotosolver mix head, and 10.5" diameter 4-blade upper foil secured to the shaft. Unit uses a standard Admix flange mounting arrangement and is configured for mounting on a lift stand. Net weight is approximately 1,090 lb with shipping weight of approximately 1,430 lb. Rated torque is approximately 1,432 in-lb with bending moment of approximately 4,826 in-lb. Explosion-proof motor is UL and CSA approved for Class I, Division 1, Group D or Class II, Division 2, Groups F and G. Possible applications and suitable products include high-shear dispersion, powder wet-out, emulsification, hydration, and mixing of compatible food, beverage, pharmaceutical, cosmetic, chemical, and other liquid-process products.
MFR: Admix
Stock No.:
54512007Unused Admix 40 HP Rotosolver High-Shear Mixer
Unused Admix Rotosolver high-shear mixer, model 250RS175, tote-base. Constructed with 316 stainless steel wetted parts finished to 30 Ra. Unit is equipped with a 40 HP, 1,750 RPM explosion-proof motor rated for 3-phase, 60 Hz, 230/460V electrical service and a nominal shaft speed of 1,750 RPM. Mixer features an approximately 3.15" diameter shaft, 6.89" diameter threaded Rotosolver mix head, and 10.5" diameter 4-blade upper foil secured to the shaft. Unit uses a standard Admix flange mounting arrangement and is configured for mounting on a lift stand. Net weight is approximately 1,090 lb with shipping weight of approximately 1,430 lb. Rated torque is approximately 1,432 in-lb with bending moment of approximately 4,826 in-lb. Explosion-proof motor is UL and CSA approved for Class I, Division 1, Group D or Class II, Division 2, Groups F and G. Possible applications and suitable products include high-shear dispersion, powder wet-out, emulsification, hydration, and mixing of compatible food, beverage, pharmaceutical, cosmetic, chemical, and other liquid-process products.
MFR: Admix
Stock No.:
54595001Used Ingersoll Rand RS30i-A125 Rotary Screw Air Compressor Package – 40 HP, 184 CFM, 125 PSI
Used Ingersoll Rand RS30i-A125 Rotary Screw Air Compressor Package 40 HP, 184 CFM, 125 PSI. Rated for approximately 184 CFM with a 125 PSI maximum operating pressure. Driven by a 40 HP motor. Package includes an Ingersoll Rand D255NC refrigerated air dryer for moisture removal and improved compressed air quality, along with an air receiver tank to provide air storage, stabilize system pressure, and reduce compressor cycling. Reported 1,772 operating hours. Serial number CBV457593, built 2016. Complete compressed air package suitable for a wide range of industrial applications. Has 0 run hours since last major service was done.
MFR: Ingersoll-Rand
Stock No.:
54687124Used This disperser has two (2) stainless steel shafts that measure 56" long with a blade diameter of 12.5". Each shaft is driven by a 40 hp, 1765 rpm motor that requires 230/460 vac, 3 ph electricit...
Used-This disperser has two (2) stainless steel shafts that measure 56" long with a blade diameter of 12.5". Each shaft is driven by a 40 hp, 1765 rpm motor that requires 230/460 vac, 3 ph electricity. Unit is equipped with an air over oil lift. Rated for hazardous locations.
Stock No.:
54687143Used 11,400 cfm @ 12" SP New York Blower Co series 20 GI, Painted stainless steel housing and wheel. Blower has a 19.5" diameter inlet and 17"w x 20.5"h outlet. The fan has 6 heavy blades. The 40 hp ...
Used-11,400 cfm @ 12" SP New York Blower Co series 20 GI, Painted stainless steel housing and wheel. Blower has a 19.5" diameter inlet and 17"w x 20.5"h outlet. The fan has 6 heavy blades. The 40 hp motor turns 1770 rpm. Requires 230/460 vac 3 phase electrical supply. Overall size is about 72" wide x 68" long x 98" tall blower only does not include transition duct. Shop no.806572 100. Wheel size 364 LS. Year built 2007.
MFR: New York Blower
Stock No.:
54689001Used 2016 Carrier WeatherMaker 48A4E040 40-Ton Packaged Rooftop HVAC Unit – Gas Heat, R-410A Cooling
Used- 2016 Carrier WeatherMaker Model 48A4E040-E-521FE, 40-Ton Packaged Rooftop Gas Heat/Electric Cooling Unit, R-410A Refrigerant, 208/230V, 3-Phase, 60 Hz. Unit equipped with 20 HP indoor supply fan, (4) 1 HP condenser fan motors, dual refrigerant circuits with approximately 88 lbs total factory R-410A charge, and natural-gas heating rated 600,000 to 800,000 BTU/hr input with 648,000 BTU/hr output. Serial No. 3616U44012. Approximate base unit weight 5,334 lbs.
MFR: Carrier
Stock No.:
51722004Used Metal Craft TranStore 213 Gallon Tote Bin – 304 Stainless Steel
Used- Metal Craft TranStore Tote Bin, 304 Stainless steel, 213 Gallon. 9400 lb./ 4263 Kg Max. Serial# 75629-5, Built, 2017.
Stock No.:
11059226Used Lee 400 Gallon Jacketed Vacuum Pan. Mix Kettle with Scrape Agitation
Used- Lee 400 Gallon Jacketed Vacuum Pan. Mix Kettle with Scrape Agitation. Model 400D7S. Sanitary Vessel Rated for Full Vacuum. Jacket Rated 90 PSI at 332 Degree F. Agitator is 3/2 HP, 230/460-190/380 Volt, 1760/1460 rpm into gear box with 18:1 ratio. National Board # 6444. Kettle is 13' OAH x 5'3" OD at the jacket. 3" CBO.
MFR: Lee Ind
