Cannabis Industry Equipment

Used Shanghai Junyu JYC-500 Coating Drum for Sale – Stainless Steel, 1.5 HP Moto

Used Shanghai Junyu Food Machine Co., Lt Coating Drum, Model JYC-500, Stainless Steel. Approximately 40" diameter x 62" long. Driven by a 1.1kW (1.5hp), 1400rpm motor. Approximate 1-3/4" tall flights with 10" spacing. 19-1/2" infeed and outfeed. Control panel with Delta MS-300 drive. Mounted on a stainless steel frame. 3/60/220 Volt.

Used Great Lakes Air GN2-1800C11-XP2 Nitrogen Generator System – 3,745 SCFH, 99.5% Purity with Air Dryer & Tanks

Used- Great Lakes Air Package Nitrogen Generator, Model GN2-1800C11-XP2, Serial #42118. Rated capacity of 3,745 SCFH. Produces Nitrogen at 99.5% purity. Inlet pressure of 110 PSIG. Minimum inlet piping size 2''. Unit includes (2) Penway Inc. air receiver tanks rated at 150 psi at 450 degrees F, National Board #34983, 34984. (2) Manchester Tank 400 gallon tanks rated 200 psi at 450 degrees F. Refrigerated Air Dryer, Model GRF-250A-436, Serial #41822, 3/60/460V. Refrigeration compressor 1.5 HP. R404a refrigerant type. Built 2013. Overall dimensions: 85'' wide x 125'' long x 117'' tall.

MFR: Great Lakes

Used Unique Mixers & Furnaces MME-3 PVT Mixtruder – 6 Liter Stainless Steel Masticator Mixer Extruder

Used Unique Mixers & Furnaces MME-3 PVT Mixtruder 6 Liter (1.58 Gallons) Stainless Steel Masticator Mixer Extruder. 316 stainless steel product contact surfaces, 304 stainless steel non contact surfaces. 6 liter (1.58 gallon) total capacity, 3 liter (.80 gallon) working capacity. Masticator blades, jacketed bowl rated 4 kg/ sq centimeter (56 psi). 3 HP, 230/460 volt, 1705 rpm motor thru 17.12:1 gearbox mixer motor drive. Extruder screw driven by 3 hp, 230/460 volt, 1705 rpm thru 17.12:1 gearbox extruder motor drive. Removable end plates, flat cover, mounted on unitized base. External control panel with VFD motor controllers, order# U-2805. Built 2006

MFR: Unique

Used US Filter J-Press 800G32-20-10DYLW Filter Press – 190 Sq. Ft., 31" Plates, 3,700 PSI Clamp (2003)

Used- US Filter J-Press Filter Press Model 800G32-20-10DYLW. Approximately 190 square feet total filtration area, and 10 cubic foot cake capacity. (21) 31'' x 31'' plates. Rated to 100 psi maximum feed pressure, 100 psi air supply pressure, and 3700 psi hydraulic clamping pressure. 4100 psi relief pressure. Serial # F07571. Built 2003.

MFR: US Filter

IN STOCK- Paul O. Abbe, Model RB-10 Ribbon Blender. New.

NEW & IN STOCK- Paul O. Abbe, Model RB-10 Ribbon Blender. In -Stock .10 Cubic Foot working capacity. 11 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 22.1" wide x 38.6" long x 25" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 7.5 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 66 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 11.8" wide x 19.7" long. Approximate 3.2" wide x 9.9" flush air operated plug valve. Discharge housing is approximate 15.4" wide x 19.3" long. Approximately 35.5" discharge height. Approximate weight 1,320 pounds. Approximate overall dimensions: 36.4" wide x 76.4" long x 81.4" high. Controls are available upon request.

MFR: Paul O Abbe

Unused GEA Nu-Con DT750 Rotary Airlock Valve – Stainless Steel Sanitary Design

Unused GEA Nu-Con Rotary Sanitary Air-Lock Valve, Model DT750 EDEM. Material of construction: SS SS ICS. Serial# 2871755. No drive.

MFR: Nu-Con Engineering

Unused GEA Nu-Con DT 750 DEM Sanitary Rotary Airlock Valve with Gearmotor

Unused GEA Nu-Con Rotary Stainless Steel Air-Lock Valve, Model DT 750 DEM. Material of construction: SS SS ICS. Includes .75kW drive. Serial# 61510952.

MFR: Nu-Con Engineering

Sanitary Rotary Airlock Valve GEA Nu-Con DT 750 DEM with Variable Speed Gearmotor

Unused GEA Nu-Con Sanitary Rotary Air-Lock Valve, Model DT 750 DEM. Material of construction: SS SS ICS. Includes .75kW, 3/60/230/460 volt, 300-1800 gearmotor drive. Serial# 61510953.

MFR: Nu-Con Engineering

Unused GEA Nu-Con DT 750 DEM Rotary Airlock Valve – Stainless Steel (No Drive)

Unused GEA Nu-Con Model DT 750 DEM Rotary Air-Lock Valve. Material of construction: SS SS ICS. Serial# 61510954. No drive.

MFR: Nu-Con Engineering

Used Patterson-Kelley Twin Shell Dry Blender – 10 Cu. Ft., Stainless Steel, 1.5 HP Motor

Used- Patterson Kelley Twin Shell Dry Blender, 10 Cubic Feet, Stainless Steel. Maximum material density 90-Lb / cu. ft. Driven by a 1.5 HP, 3/60/575 volt, 1735 rpm gear motor, 21.32/1 ratio. 8" Diameter center bottom outlet. Mounted on a stand. Serial# 27643.

MFR: Patterson Kelley

Used Twin Motion 95-Gallon Stainless Steel Vacuum Mixer – Jacketed Kettle

Used- Twin Motion Vacuum Mixer, 95 Gallon, Stainless Steel. Approximate dimple jacketed mixing kettle, 30" diameter x 29" straight side, jacketed 10" up straight side, vacuum cover. Anchor style agitator with sidewall scrappers. Flat Top Lift/Lower Mechanism, driven by 10 hp, hydraulic system. Off set high speed disperser, driven by 10 hp, 3/60/230/460 volt, 1725 rpm motor. Board .90 Kw vacuum pump. Floor mounted. No manufacturers tag.

MFR: Unknown

Used Patterson-Kelley 10 Cu Ft Double Cone Vacuum Dryer – Stainless Steel, Gear Motor, On Stands

Used- Patterson-Kelley Double Cone Vacuum Dryer, 10 Cubic Feet Working Capacity, Stainless steel construction, Maximum material density 125 pounds a cubic foot. Top port, bottom outlet with valve. Shell driven by an approximate 1/2hp gear motor. Mounted on stands. Sold as is, no jacket ratings.

MFR: Patterson Kelley