Cannabis Industry Equipment

Used AMK VIU4 4-Liter Extrusion Kneader Mixtruder – Stainless Steel Sigma Blade Mixer Extruder with Vacuum Cover

Used- 4 Liter AMK Extrusion Kneader Mixtruder, Model VIU4. Stainless steel construction, vacuum cover, approximately 8" x 8" x 7.5" deep mixing changer, tangential sigma blades driven by 2.2 kw motor drive, discharge extruder driven by 1.5 kw motor drive, jacketed bowl and extruder barrel, on base, serial# 12202. Built 1985.

MFR: AMK

Vestil Hydraulic Drum Dumper for 30 & 55 Gallon Drums – Portable Unit

Used Vestil Model HDD-26-7-P Hydraulic Drum Dumper. Maximum Capacity up to 750 Lbs. Works with 55 and 30-gallon plastic, steel and fiber drums. The unit has a solid steel chute. Portable unit with two rigid and two swivel casters with floor lock screws. All steel construction. Upper travel limit switch, emergency brass safety velocity fuse in cylinder and vertical adjustment drum restraints are standard. Chute is rotated with a hand held control on an 8 ft. long coil cord standard.

MFR: Vestil

Used Yale 2,000 lb. Capacity 24V Electric Sit-Down Forklift – Model MSW020LAN24CS083

Used- Yale Aprox. 2,000 lb. Capacity 24 V Electric Sit-Down Forklift, Model MSW020LAN24CS083, S/N N576930 with 2-Stage 126" Lift Height

MFR: Yale

Used Paul O. Abbe Lab Double Arm Mixer – Model 1BSB, 1 Gal, 316 SS, Hydraulic Tilt

Used- Paul O. Abbe Lab Double Arm Mixer, Model 1BSB, 316 Stainless Steel. 1 Gallon operating capacity (2 total). Carbon steel jacket rated 14 psi. Bowl approximate 7" left to right x 9-1/2" front to back x 6-3/4" deep, tangential sigma blades, front blade 70 to 17 rpm, rear blade 41 to 10 rpm, flat top cover, geared one end. Single ram hydraulic tilt with power pack. Mixer driven by a 2 hp, 3/60/230/460 volt, 814 rpm variable speed motor with reducer. Mounted on legs with base. Serial # A41282.

MFR: Paul O Abbe

Used Paul O. Abbe Lab Double Arm Mixer – Model 1SBM, 1 Gal, 316 SS, Hydraulic Tilt

Used- Paul O. Abbe Lab Double Arm Mixer, Model 1SBM, 316 Stainless Steel. 1 Gallon operating capacity (2 total). Carbon steel jacket rated 14 psi. Bowl approximate 7" left to right x 9" front to back x 7-3/4" deep, overlapping sigma blades, front blade 53.9 to 13.9 rpm, rear blade 53.9 to 13.9 rpm, flat top cover, geared one end. Single ram hydraulic tilt with power pack. Mixer driven by a 2 hp, 3/60/230/460 volt, 1725 rpm variable speed motor with reducer. Mounted on legs with base. Serial # A39823.

MFR: Paul O Abbe

Used Fairey Microfiltrex LTD (Porvair) Stainless Steel Dust Collector / Pulse Jet Filter System

Used- Fairey Microfiltrex LTD (Porvair) Stainless Steel Dust Collector / Pulse Jet Filter System. Vertical, 316L Stainless Steel. Vessel body 10" diameter x 24" straight side. Shell rated 90 psi / FV at 30 to 212 degrees F. 316L Heads. Jacket rated 90 psi / FV at 30 to 212 degrees R. (4) Approximate 3" diameter x 23" long filter cages. 4", (2) 1/4" Inlets. Certified by Ardeth Engineering - National Board# 623, Serial# 690, Built 1996.

MFR: Fairey Microfiltrex

Aaron Process LNG-1 1-Gallon Vacuum Jacketed Stainless Steel Sigma Blade Mixer

Used Aaron Process 1-gallon laboratory double-arm sigma blade mixer, Model LNG-1, featuring a 304 stainless steel mixing bowl measuring 7" wide x 9-3/8" long x 8-3/4" deep. The vacuum-rated bowl includes a top cover with two 2" sight glasses and a jacket rated for 14.7 pounds per square inch gauge at 400 degrees Fahrenheit. Equipped with manual handle-operated tilt, a 2-horsepower TEFC DC motor rated for 180 volts, 1,750 rpm and 9.4 amps, and a 25:1 gearbox ratio. Includes a control panel with adjustable speed control, digital speed readout, start/stop controls and emergency stop. Suitable for laboratory mixing, blending and kneading applications involving small batches of viscous or paste-like products.

MFR: Aaron Process

Used Premier Mill PLM5 Planetary Mixers – 5L Jacketed, 304 SS (1 Working, 1 for Parts)

Used- (2) Premier Mill Planetary Mixers, Model PLM5, 304 Stainless Steel. 5 Liter(1.3 gallon) total capacity, 3 liter(.08 gallon) working capacity. Jacketed mixing can approximate 8-1/2" diameter x 5-1/2" deep. (1) working mixer built 2008, and (1) mixer for parts built 2005.

MFR: Premier

Unused- Caterpillar Cogeneration Natural Gas Generator System, 1.5 MW.

Unused- Caterpillar Cogeneration Natural Gas Generator System, 1.5 MW, Permanent. Caterpillar Model CG170-16 Natural Gas Engine Rated at 1556 kW, 4160 V, 3 Phase, 60 Hz at 0.8 Power Factor. Pritchard Brown Enclosure, Cannon Boiler, Boulden Radiator, WHR System, Stueler SCR System to be Installed Outside of the Enclosure, Caterpillar ISO Auxiliary Cabinet. Built 2017.80 hours of Engineering Support to site at customers location. U.S.A. locations only.

MFR: Caterpillar

Used Shanghai Junyu JYC-500 Coating Drum for Sale – Stainless Steel, 1.5 HP Moto

Used Shanghai Junyu Food Machine Co., Lt Coating Drum, Model JYC-500, Stainless Steel. Approximately 40" diameter x 62" long. Driven by a 1.1kW (1.5hp), 1400rpm motor. Approximate 1-3/4" tall flights with 10" spacing. 19-1/2" infeed and outfeed. Control panel with Delta MS-300 drive. Mounted on a stainless steel frame. 3/60/220 Volt.

Used Great Lakes Air GN2-1800C11-XP2 Nitrogen Generator System – 3,745 SCFH, 99.5% Purity with Air Dryer & Tanks

Used- Great Lakes Air Package Nitrogen Generator, Model GN2-1800C11-XP2, Serial #42118. Rated capacity of 3,745 SCFH. Produces Nitrogen at 99.5% purity. Inlet pressure of 110 PSIG. Minimum inlet piping size 2''. Unit includes (2) Penway Inc. air receiver tanks rated at 150 psi at 450 degrees F, National Board #34983, 34984. (2) Manchester Tank 400 gallon tanks rated 200 psi at 450 degrees F. Refrigerated Air Dryer, Model GRF-250A-436, Serial #41822, 3/60/460V. Refrigeration compressor 1.5 HP. R404a refrigerant type. Built 2013. Overall dimensions: 85'' wide x 125'' long x 117'' tall.

MFR: Great Lakes

Used Unique Mixers & Furnaces MME-3 PVT Mixtruder – 6 Liter Stainless Steel Masticator Mixer Extruder

Used Unique Mixers & Furnaces MME-3 PVT Mixtruder 6 Liter (1.58 Gallons) Stainless Steel Masticator Mixer Extruder. 316 stainless steel product contact surfaces, 304 stainless steel non contact surfaces. 6 liter (1.58 gallon) total capacity, 3 liter (.80 gallon) working capacity. Masticator blades, jacketed bowl rated 4 kg/ sq centimeter (56 psi). 3 HP, 230/460 volt, 1705 rpm motor thru 17.12:1 gearbox mixer motor drive. Extruder screw driven by 3 hp, 230/460 volt, 1705 rpm thru 17.12:1 gearbox extruder motor drive. Removable end plates, flat cover, mounted on unitized base. External control panel with VFD motor controllers, order# U-2805. Built 2006

MFR: Unique