Adhesive and Sealant Equipment

Used - 4” x 120” Glass Steel Pipe for Industrial Applications

Used- 4" X 120" Glass Steel Pipe.

MFR: No

Used Baileigh PT-44-VH Plasma Cutting System – 4' x 4' Table, Auto Height Detection, Water-Cooled, 1" Steel Capacity

Used- Baileigh Plasma Cutting System Consisting Of: Baileigh PT-44-VH Plasma Table; 4' x 4' cutting area; Automatic Height Detection; Water Assist Cooling; Industrial Down Draft Table; High Quality Stepper Motors on X and Y Axis; Fully Welded Main Frame Will Support Up to 1" Thick Mild Steel; Industrial Cable Track; Hardened, Ground and Polished Slide Ways; Control Console with Hand Held Pendant. 220 volt, 60 hertz; Built 2014.

Used Park Industries Fastback Flat Edge Polisher | Single Pass Stone Edge Finisher

Used- Park Industries Flat Edge Polisher, Model Fastback. Single-pass edge finisher. Feed speed of 12" min. Works with material that is 1 - 6 cm thick. 3/60/240V. 100 Full load Amps. Serial # 206829.

Used Prater Vibratory Screener/Cleaner – Model VS2-36-1EX – For Parts Only

Used- Prater Vibratory Screener/Cleaner. Model VS2-36-1EX. For Parts Only.

MFR: Prater

Used Rite Boiler Co. Model 105S Natural Gas-Fired Low Pressure Steam Boiler – 19 BHP – Built 2020

Used- Rite Boiler Co. Natural Gas-Fired Steam Boiler, Model 105S. Compact, low-pressure steam boiler designed to provide reliable and efficient steam generation for a wide range of industrial and commercial applications. Rated at 798,000 BTUH input, 15 PSI maximum allowable working pressure, 19 boiler horsepower (BHP), a 250 degrees F maximum operating temperature, and 101 sq. ft. of heating surface. Engineered for dependable performance in process heating, sanitation, humidification, and other low-pressure steam duties. The boiler operates on natural gas with a 14" W.C. maximum fuel supply pressure, 7" W.C. minimum supply pressure at flow, 3.5" W.C. maximum manifold gas pressure, and 1.5" W.C. minimum manifold gas pressure. Electrical requirements are 120 Volt, single phase, 60 Hz. Designed for indoor installation only, Serial # 33706., National Board # 19478, Built 2020.

MFR: Rite

Rotex Triple Deck Screener – Model 403A-AL-MS, 30" × 60", 4 Outlets, w/ Mezzanine & Auger (Used)

Rotex Triple Deck Screener Model 403A-AL-MS with 30" x 60" screens, designed for efficient multi-stage product separation and classification. Unit features four discharge outlets, aluminum cover and screen frames for reduced weight and corrosion resistance, automatic screen tensioning, and a mild steel pan and box frame for structural durability. Equipped with a 2 hp motor rated for 208-230/460 V, 1,800 rpm. Screen weights are approximately 145 lbs on the upper deck and 45 lbs on the lower deck. Serial number R360888. Package includes a walk-around mezzanine and auger, providing a complete material handling and screening setup.

MFR: Rotex

Pre-Owned Rotex Model 242A ALSS Screener – 24" x 48" Stainless Steel Deck

Used- Rotex Screener, Model 242A ALSS, 2 Surface Model. 8 Square Foot Nominal area per surface. 304 Stainless Steel, 24" wide x 48" nominal screen size per surface (in.). Bottom stainless steel deck has 3/8" diameter holes. Aluminum cover with a 10", and 3-1/2" opening. Driven by a 1hp 3/60/208-230/460v 1730rpm motor. (2) 3-1/2" end bottom discharges, with 50" discharge height. Serial# R210886. Mounted on a carbon steel frame. Upper WT 102. Lower WT 46.

MFR: Rotex

Used Rotex Stainless Steel Sanitary Screener, Model #431-SAN-SS/SS. 40" wide x 84" long single deck. The inlet is 8" diameter. The unit has a 6” and an 8" diameter outlet. Upper Wt. 144, Lower Wt. 5...

Used-Rotex Stainless Steel Sanitary Screener, Model #431-SAN-SS/SS. 40" wide x 84" long single deck. The inlet is 8" diameter. The unit has a 6” and an 8" diameter outlet. Upper Wt. 144, Lower Wt. 55. Clamp down SS top cover, 2 bottom outlets. Approximately 24 sq.ft. screen area. The shaker is driven by 3 hp 1715 rpm motor and belt drive system. Requires 230/460v 3 ph electrical source. Mounted on a carbon steel frame. Serial #190172. Overall 132” x 60” x 38”.

MFR: Rotex

Used S.G. Frantz Co. "FerroFilter" electromagnetic separator. Model number 73F2. Serial number E1512. It is designed to separate magnetic materials from heavy slurries at a maximum flow rate of 1,300...

Used-S.G. Frantz Co. "FerroFilter" electromagnetic separator. Model number 73F2. Serial number E1512. It is designed to separate magnetic materials from heavy slurries at a maximum flow rate of 1,300 to 4,000 gph. It has stainless steel contact parts and a swing back lid for cleanout. The cooling jacket is rated for 150 psi. This unit has a 3" threaded inlet and a 3" threaded outlet. 115 vdc 45 amps of power required. This unit sits on a carbon steel stand.

Used Hewitt Robins 6' x 24' V14 Screening Plant – Model VSG-05214-01 – 3-Size Separation, Road Ready

Used- Hewitt Robins 6' x 24' V14 Screening Plant; Model VSG-05214-01; Runs on 3 phase 30 hp motor. Makes 3 sizes, current screens are heavy duty 2" screen on top deck and 3/8" Veno-harp screens set on lower deck. Fines fall to bottom discharge wide belt conveyor via a 10 hp motor; Collapses for hauling. New tires. Pulls with 5th wheel. 10 wide x 30 long x 134" high for road transport.; 20" x 36" magnet for conveyor head pulley with 2-15/16" Shaft; Last used for soft powder material.

MFR: Hewitt Robbins

Used HTC Hydraulic Shear – 1/2" Mild Steel, 3/8" Stainless Capacity – Industrial Plate Cutting

Used- HTC Shear. 1/2" mild steel cutting capacity; 3/8" stainless steel cutting capacity. 3/230-460V. Approx. OAD: 12.5 L x 8.33 W x 9.3 H.

MFR: HTC

Used Nash 2BA Vacuum Pump – Type ELMO-F, 1,200-13,000 ACFM, 50 PSIA

Used- Nash Vacuum Pump, Model 2BA, Type ELMO-F. Suction Capacity: 1,200 to 13,000 ACFM, 50 psia discharge pressure. 8" diameter Inlet/Outlets. Requires 500hp motor, No motor included. Serial# 518208A Reportedly rebuilt.

MFR: Siemens Allis