Adhesive and Sealant Equipment

Unused Binder BF 115-UL Incubator – 4.1 Cu Ft, 115V, 212°F, Stainless Steel Chamber

Unused- Binder Incubator, Model BF 115-UL, 4.1 Cubic Feet Capacity. 0.4 kw, 115 volt heater, rated to 212 degrees F, approximately 15.5" deep x 23.75" wide x 8" high stainless steel chamber with glass internal door, stainless steel lined external door with controls, serial# 11-20029, new 2011.

MFR: Binder

Used Wheelabrator 4-Wheel Wire Mesh Belt Shot Blast Machine – Continuous Feed Surface Preparation System

Used Wheelabrator continuous-feed wire mesh belt shot blast machine for cleaning, descaling, deburring, surface preparation, and finishing of compatible metal components. Features a 27-inch wire mesh conveyor belt, 27-inch-wide 16-inch-high work opening, and approximately 24-inch-wide 14-inch-high single-pass cleaning envelope. System is equipped with four 13-inch blast wheels, each rated at 10 HP, and operates at an approximate line speed of 6 feet per minute. Pitless design helps simplify installation by avoiding the need for a below-grade foundation pit. Components travel continuously through the blast chamber for multi-angle abrasive coverage. Suitable for compatible fabricated parts, castings, stampings, forgings, weldments, and machined components. Buyer should verify the complete included scope, electrical requirements, media-recovery and dust-collection equipment, blast-wheel condition, liner wear, mesh-belt condition, safety systems, and performance using representative parts before purchase.

Used Lucas Horizontal Precision 41 Boring Mill | 4" Spindle | #6 Morse Taper | 60" X-Axis Travel | Rotary Table Included

Used Lucas Horizontal Precision 41 Boring Mill | 4" Spindle | #6 Morse Taper | 60" X-Axis Travel | Rotary Table Included. 24" spindle feed W-axis. 48" vertical Y-axis travel. 57" Z-axis saddle travel with the backrest installed, 77" saddle travel w/o backrest. 60" cross travel with 36" x 74" table. Approx. 48" vertical head travel (Y-axis). Approx. 36?48? spindle travel (W-axis/Z-axis). Approx. 48?60? table cross travel (X-axis). Saddle/depth travel varies between 48?58?. 34?48? W x 62?68" table size. Scales on X, Y, Z. Manual Shifting for feeds, speeds, and backgear. 15-1550 Spindle RPM, Approx. 15 HP spindle motor, 3/60/220VAC. Rotary table included.

Used Brabender Farinograph – Double Arm Mixing Head | Dough Testing | SALE SUBJECT TO SELLER'S APPROVAL

Used- Brabender Farinograph With Double Arm Mixing Head. ** SALE SUBJECT TO SELLER'S APPROVAL **

MFR: Brabender

Used C.W. Brabender Plasti-Corder Mixer Extruder System, Model DR-2072 Drive System, 7.5 hp, dc motor.

Used- C.W. Brabender Plasti-Corder Mixer Extruder System, Model DR-2072 Drive System, 7.5 hp, dc motor.

MFR: Brabender

Used Carver RS6-A 3X2X6 DI Vacuum Pump – 40HP, 3545 RPM, Base Mounted

Used- Carver Model RS6-A 3X2X6 DI Vacuum Pump. Driven by a 40hp, 3/60/230/460 volt, 3545rpm motor. Base mounted. Built 2022.

MFR: Carver

Used Carver RS6-A 3X2X6 DI Vacuum Pump – 40HP, High-Speed Industrial Pump

Used- Carver Vacuum Pump, Model RS6-A 3X2X6 DI. Driven by a 40hp, 3/60/230/460 volt, 3545rpm motor. Base mounted. Built 2022

MFR: Carver

Used Cepheid GeneXpert System with GX-Hub & IVD Computer Package – Molecular Diagnostic PCR Testing Platform

Used- Cepheid GeneXpert system with GX-Hub and IVD computer package including the GX-Hub, Cepheid IVD touchscreen workstation, GeneXpert Dx / IVD operating software and licensing, and associated cables, interface hardware, and accessories. This configuration provides the primary system hardware together with the dedicated IVD computer and the required connection components as configured.

Used Cleaver Brooks Steam Boiler, Model CB-100-70-150ST. Rated 2,343,000 BTU/hour. 150 PSI max. working pressure. 70 HP. 3/60/230V. Serial# T3376-1-1, Built 2012.

Used- Cleaver Brooks Steam Boiler, Model CB-100-70-150ST. Rated 2,343,000 BTU/hour. 150 PSI max. working pressure. 70 HP. 3/60/230V. Serial# T3376-1-1, Built 2012.

MFR: Cleaver Brooks

Used Weldomat AG CH3-2437 Contact Welding Machine – Dual Units | 600 Contacts/Min | Tape & Wire Welding

Used- Weldomat Automatic Contact Welding Machine with (2) Welding Units; Model AG CH3-2437;Suitable for welding solid and bimetal contacts off tape reel onto stip; Up to 600 contacts per minute; 300 contacts per welding unit; Horizontal tape fee; (2) welding units in machine; Tape width 1.20-3.50mm; tape height 0.30-1.00mm; cross section 0.05-2.60 square mm; round wire 1.00-2.20mm; range of contact length 0.60-3.50mm

Used CJRTec 100 Ton CNC Conveyor Beam Press – 63" x 50" Table | Die Mount System, Waste Recovery | 2015

Used- CJRTec 100 Ton CNC Conveyor Beam Press/Die Press; Extended Table 63" x 50"; 2 Roll Pre-Feed Stand; Waste Recovery Cart; Die Mounting System. Mfg. 2015.

Used Herr-Voss Coil Line Arbor with Coil Car – 10,000 lb Capacity | 18–24" Coil ID | Control Box Included

Used- Herr-Voss Coil Line Arbor and Coil Car; 18-24" coil ID capability; 10,000 pound capacity, arbor moves back and forward to adjust for camber; Includes control box for Coil Car and Paper winder.