Adhesive and Sealant Equipment

Used Niro Mobile Minor Spray Dryer – Stainless Steel | With Atomizer | Serial #1952

Used Niro Mobile Minor Type HT Portable Spray Dryer, Stainless Steel. Approximate 32" diameter x 24" straight side. Drying capacity approximate 2.2-15.4 lbs (1-7 kilos) an hour. Electrically heated, temperature approximately up to 350 degrees C. Top entering Niro rotary atomizer, air driven. Includes cyclone, control panel. Center bottom outlet. On wheels. Serial# 1952.

MFR: Niro

Used York Chiller Starter/Control Panel – 4160V | 60Hz | Built 2017 | High Voltage Control

Used- York Chiller Starter/Control Panel. 4160V nominal rated voltage; 4576 max. continuous voltage; 3744V min. continuous voltage; 60Hz. Built 2017.

MFR: York

Used Battery Recycling Systems Lead Refining Kettle Air Filtration System – 30,000 CFM, 150 HP Blower, Bag House, BRS/Wirtz

Used- Battery Recycling Systems, Inc. a sub-div. of Wirtz. Complete system consisting of a Lead Refining Kettle Air Filtration System. This system captures exhaust and fumes from the lead refining process through a sanitation hood mounted on the refining kettle, directing them into a bag house air filtration unit. The setup features a multi-cell bag house configuration with drop-out boxes, approximately 60 feet of internal plant ducting connected to each kettle's sanitation hood, a specialty air recirculation blower, and an automatic filter bag cleaning system with integrated dust collection. Processed air is discharged via a chimney stack, which must be constructed on-site by the customer per BRS prints due to its size. The system operates on 460V, 3-phase, 60Hz, with 3-wire and 24 VDC control voltage. It includes standard fasteners, uses English units, requires layout approval, and features equipment painted in RAL-5015 (Sky Blue) for carbon steel components and RAL-1018 (Zinc Yellow) for safety guards. NEW YORK BLOWER BC-30 SIZE 36 BC ARR-1 POS-Z CW ROTATION TAU DISCHARGE FLANGED MOTOR; INTEGRAL TE 150HP 1800RPM 3-60-460 PREMIUM EFF. 445T BALDOR, CAPACITIES: 30000 CFM, 18IN WG, 2207RPM, 132BHP, 0.0607 LB/FT^3, 4400FT 70 F.

New MKM CD 250 Atomizer – 9000–13,000 RPM, SS316 Spray Disk, RPM Sensors, Insulated Jacket

Unused / New MK Manufacturing Co, Atomizer, Model MKM CD 250 features a feeder cover, retainer, sleeve, and feeding pipe made from SS 316 stainless steel, all tested, machined, and balanced as required, the spray disk is also SS 316, precisely machined and balanced, the main shaft is constructed from special spring steel with centerless grinding for high precision, bearing housing is fabricated from mild steel with cylindrical surfaces to accommodate bearing seats, the shaft is driven by a V-belt pulley system, operating speed ranges from 9000 to 13000 RPM and includes RPM sensors and a digital display, the atomizer jacket is insulated with ceramic wool, air purging is provided to prevent sediment buildup and ensure continuous spray dryer operation, lubrication is handled by an MKM make pump with motor, double filters, and gauges for continuous oil flow, the unit is supplied without a motor, compatible with a 25 HP, 2900 RPM flange-mounted Siemens or Hindustan motor, the atomizer pulley is made from SS 304 while the motor pulley is made from cast iron or mild steel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

New MKM CD-210 Rotary Disk Atomizer – SS316, 19,000 RPM, F-35 Compatible, Includes Toolkit

New MKM CD-210 Rotary Disk Atomizer SS316, 19,000 RPM, F-35 Compatible, Includes Toolkit. Constructed of 316 stainless steel. The atomizer features key components in SS 316 stainless steel, including the feeder cover, retainer, sleeve, feeding pipe, and spray disk (?210 mm), all precision-machined and dynamically balanced at 19,000 RPM. The main shaft is spring steel, centerless ground for high concentricity and strength. The mild steel bearing housing includes precision-machined seats for alignment. Power is delivered via a V-belt pulley system. Operating speed matches existing F-35 units, with jacket and dimensions ensuring full interchangeability. An MKM oil pump system provides continuous automatic lubrication, with oil temperature maintained below 75C at 10 TPD. RPM range: 9,00018,000; vibration remains within specified limits. Includes RPM sensor/display and a maintenance tool kit with pullers, spanners, and locknut tools. Compatible with and replacement for an F-35 atomizer. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used RefTec Shark R134a Recovery & Recycling System – AHRI 700 Standard, Single-Pass Reclaim

Used- RefTec Shark Recovery and Recycling System. Cleans dirty R134a back to ARI 700 standard reclaimed gas in a single pass. Removes oil, acids, moisture and hard particulates from even the dirtiest of gases. For every 1% of contamination the Shark Reclaim Unit removes, 2% of efficiency has been restored. R134a Rates : 5.34lbs/min (2.42kgs/min) direct liquid; 2.89lbs/min (1.31kgs/min) vapor; 2.03lbs/min (.92kgs/min) recycle; Certified by AHRI 740, ETL, UL-1963.

Used Aeromatic Aeroglide C1 120-65 RGC Fluid Bed Dryer – 5,000 lbs/hr, Stainless Steel, Natural Gas, Built 2005

Used- Aeromatic Aeroglide Dryer, Model C1 120-65 RGC. Up to 5000 lbs/hr (dependent on product); Drying Bed Area 350 sq. ft. drying area; 140 sq. ft. cooling bed area; 9'9" bed width; 152.4mm (6") max. first stage bed depth; 152.4mm (6") max. second stage (cooling) bed depth; Food grade 304 stainless steel construction; Natural gas fueled. 3/60/460V. SN 05153-02. Built 2005.

MFR: Aeromatic

Used Carrier Fluid Bed Dryer – Model FTDAD/C2460S, Gas-Fired, 24" x 5.5' Heated Section, Carbon Steel

Used- Carrier Fluid Bed Dryer, Model FTDAD/C2460S. 24" wide x 56 heated section and 2 cooling section. Gas fired. Carbon steel wetted parts. 316 strokes. 890 rpm, 460 volt. Built 2012.

MFR: Carrier

Unused Triveni Steam Turbine Generator – Model TST-2100LR, 9.8 MW, 1800 RPM

Unused Triveni Steam Turbine Generator Model TST-2100LR, 9.8 MW, 1800 RPM. 38.57 bar at 395 degrees C (743 degrees F.) inlet, 57 t/h. 0.288 bar at 68.2 degrees C (154.76 degrees F.) exhaust. 19.7 bar at 316.1 degrees C (600.98 degrees F.) bleed. 1800 RPM. Built 2018.

Used Grieve HC-550 Industrial Oven – Electric, 550°F Max Temp | 30kW

Used Grieve Model HC-550 industrial electric airflow cabinet oven designed for drying, curing, baking, preheating, heat treating, and general thermal processing applications. This Grieve HC-550 oven is rated for 30 kW electric heat input and has a maximum operating temperature of 550F. The unit operates on 460-volt, 3-phase, 60 Hz power and draws 41 amps during operation. It is equipped with a 1.5 HP largest motor load, 5 kA symmetrical short-circuit current rating, and NEMA Type 1 enclosure for basic electrical protection. Built in 2011, Serial / Electrical Drawing Number 103340A0611, this industrial cabinet oven may be suitable for manufacturing, metal parts drying, coating and paint curing, adhesive curing, plastics and composites processing, electronics thermal processing, aerospace and automotive components, laboratory heating, research and development, and other controlled heating applications. This used Grieve industrial oven may be relevant for buyers searching for a used Grieve HC-550 oven, electric cabinet oven, industrial drying oven, airflow cabinet dryer, 550F oven, 30 kW industrial oven, 460V 3-phase oven, heat treating oven, curing oven, or thermal processing oven. Aaron Equipment freight specialists can assist with door-to-door transportation, export documentation, customs paperwork, and equipment logistics.

VDL Industrial Rotary Airlock (Built 2022) – B-HT350EX00 for Sale

Used VDL Industrial Products Rotary Air lock, Model B-HT350EX00. Driven by 0.37kW / 0.50 HP, 3/60/277/480 volt, 1730/15 rpm motor. Serial# U-221467/B. Built 2022.

Used Quincy Mist Eliminator Air Treatment Unit

Used Quincy Air Treatment Unit - Mist Eliminator. Industrial compressed-air vessel, identified as Unit 3, is a vertical steel separator/filter housing designed for inline air-treatment service within a multi-compressor system. The unit features a bolted top cover with multiple service ports, heavy-duty welded legs, and integrated inlet/outlet connections sized for high-flow compressed-air applications. Internal rated 150 psi at -20 to 300 degrees F. Mounted on (3) legs. National Board & Serial# 890143. Built 2022.