Adhesive and Sealant Equipment

Used Fette 3090 Turret – 61 Station – 16mm Max Tablet Diameter – Keyed Upper Punch Guides – On Cart

Used- Fette 3090 turret, 61 station, designed for 16 mm max tablet diameter, 28 mm max depth of fill, keyed upper punch guides on cart.

Used Fette 3090i Turret – 73 Station – 13 mm Max Tablet Diameter – 18 mm Max Fill Depth

Used- 73 station Fette turret for model 3090I press, 13 mm max tablet diameter, 18 mm max depth of fill.

Used Fette 3090i Tablet Press Turret – 73 Station – Keyed Upper Punch Guides – On Cart

Used- Fette tablet press turret for 3090i press, 73 station, keyed upper punch guides on cart.

Used 2020 Lewco NS-SC4TV 4-Tote / IBC Steam Heater – 4,000 Lb. Capacity Per Tote, 125–300°F

Used- Lewco Drum and Tote Heater, Model NS-SC4TV. (4) Tote or IBC tank capacity, 4,000 lbs limit per tote. Saturated steam heating, 20 to 200 PSIG. Operating temperature between 125 to 300 degrees F. Includes controls, fan, and TCU. 3/60/480V. Serial # S2426-001-01, built 2020.

Used Ashbrook-Simon-Hartley Aquabelt Gravity Belt Thickener Type AB Size 4 – Municipal & Industrial Sludge Thickening System

Used Ashbrook-Simon-Hartley Aquabelt Gravity Belt Thickener Type AB Size 4 Municipal & Industrial Sludge Thickening System. Designed for continuous gravity thickening of municipal and industrial wastewater sludges. Unit features an approximately 3.2 meter wide x 9.425 meter long drainage belt supported by a galvanized steel frame and includes a feed tank along with an FRP exhaust hood for odor and vapor containment. Previously installed in a municipal wastewater treatment facility and removed from service following a process change. Suitable for increasing sludge solids concentration ahead of belt filter presses, centrifuges, digesters, and other downstream sludge dewatering equipment.

MFR: Ashbrook

Used Ashbrook-Simon-Hartley Aquabelt Type AB Size 4 Gravity Belt Thickener for Municipal & Industrial Sludge

Used Ashbrook-Simon-Hartley Aquabelt Type AB Size 4 Gravity Belt Thickener for Municipal & Industrial Sludge. Designed for continuous gravity thickening of municipal and industrial wastewater sludges. Unit features an approximately 3.2 meter wide x 9.425 meter long drainage belt supported by a galvanized steel frame and includes a feed tank along with an FRP exhaust hood for odor and vapor containment. Previously installed in a municipal wastewater treatment facility and removed from service following a process change. Suitable for increasing sludge solids concentration ahead of belt filter presses, centrifuges, digesters, and other downstream sludge dewatering equipment.

MFR: Ashbrook

Used Aquabelt Type AB Size 4 Gravity Belt Thickener – Continuous Sludge Thickening System

Used Aquabelt Type AB Size 4 Gravity Belt Thickener Continuous Sludge Thickening System. Designed for continuous gravity thickening of municipal and industrial wastewater sludges. Unit features an approximately 3.2 meter wide x 9.425 meter long drainage belt supported by a galvanized steel frame and includes a feed tank along with an FRP exhaust hood for odor and vapor containment. Previously installed in a municipal wastewater treatment facility and removed from service following a process change. Suitable for increasing sludge solids concentration ahead of belt filter presses, centrifuges, digesters, and other downstream sludge dewatering equipment.

MFR: Ashbrook

Used EPCON MVR Falling Film Vacuum Evaporator – 4,200 kg/h | AISI 316 | 1-Pass | Whey Concentration | Upgradeable

Used- 1-pass MVR falling film vacuum evaporator. This EPCON evaporator was designed to concentrate whey products from 5% to an impressive 20% total solids in just one pass. This falling film evaporator plant operates seamlessly with a Mechanical Vapour Recompression (MVR) unit, which utilizes electricity to recompress evaporated water, transforming it into reusable steam. The water evaporation capacity ranges between 4,000 and 4,200 kg/hour, dependent on product parameters and boiling temperature. Equipped with 745 pipes measuring ?38 x 6 meters, in addition to the MVR characteristic and boiling temperature considerations, this EPCON evaporator boasts an impressive water evaporation capacity of approximately 4,200 kg/hour. For your convenience, the complete EPCON unit will be delivered with its original technical documentation. The installation footprint measures around 8 x 8 meters, standing at approximately 8 meters in height. This versatile EPCON evaporator has the potential for a redesign/rebuild into a 2-pass evaporator, amplifying water evaporation capacity by approximately 25%. Our expert evaporator designer is ready to provide tailored calculations and drawings to optimize this unit for your specific application. Materials in contact with product are made of acidproof stainless steel, AISI316. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

Used – SEITZ ORION 100/200 Stainless Steel Filter Press – 48 m² Filtration Surface, Brewery Application

Used SEITZ ORION 100/200 Stainless Steel Filter Press 48 m Filtration Surface, Brewery Application. With a 150 hl/hour (3962.5 US gallon/hour). Currently fitted with 24 chambers & 2 end plates 1000 x 1000 mm (39" x 39"). Current filtration surface is 48 m2 (516.66 sq. ft.). Hydraulic operated. On 4 legs. Includes: (1) Kieselguhr preparation tank with agitator, (1) Dosing pump, (1) GEA beer pump, (1) Hopper with geared endless screw, Diaphragm pump for kieselguhr discharge and additional infrastructure. Previously used in a brewery application. Asking price includes proper marking, dismantling and loading to truck at location.

MFR: Seitz Orion

Used Glatt 18" Wurster Insert for GPCG-30 Fluid Bed Dryer – Coating & Granulation

Used- Glatt 18" Wurster For A Model GPCG-30 Fluid Bed Dryer.

MFR: Glatt

Used Elizabeth Hata HT-AP55-DU Rotary Tablet Press – 55 Stations, 15 HP Motor

Used- Elizabeth Hata Tablet Rotary Press, Model HT-AP55-DU. (55) Filling Stations, approximate 1-1/4" diameter x 2-1/2" deep. Driven by 15 hp 3/60/230/460V, 1780 rpm gear motor through reducer, Ratio 1:12.25. Has Mitsubishi A500 Control. Includes portable control cabinet and a skid of misc. parts. Serial# I/67.

MFR: Hata

Used Nu-Con Model NCVR-18-8-3T Stainless Steel Tank

Used-Nu-Con Model NCVR-18-8-3T Stainless Steel Tank. Unit is mounted on casters, serial number: N08060-GA-106. 304 stainless Steel, interior ground to a #4 150 grit finish. No cover. Has a 24" discharge height from floor to the bottom of the flange.