Adhesive and Sealant Equipment

Used Belshaw Adamatic OVEN 2020 Double Rack Oven – 275,000 BTU/hr | Natural Gas/Propane | 2 B-Style Racks | 2019

Used- Belshaw Adamatic Double Rack Oven, Model OVEN 2020. Natural gas or propane with automatic electric switch over; 275,000 btu/hr; Stainless steel construction; Heavy duty rack lift, accepts A, B, or C-styles, 46" long B-style lift, with spare lift for (2) B-style single racks; 39" wide x 75" tall door; 10" diameter exhaust, with 10" to 12" diameter adapter; Dayton 12" diameter exhaust fan; Oven is 72" wide x 62" long plus 30" long exhaust hood; Stainless steel floor insert; Natural Gas or Propane (Electronic automatic switch over). 3/60/208/240V New in May 2019.

MFR: Belshaw

Quincy Rotary Screw Air Compressor, Model QSI-370

Used- Quincy Rotary Screw Air Compressor, Model QSI-370. 75 hp, 208V; 125 maximum psi; 370 maximum cfm; Serial # 95452; 50,398 hours.

MFR: Quincy

Used 75 HP Kobelco KNW Series Rotary Screw Air Compressor

Used 75 HP Kobelco Screw Type Air Compressor, KNW Series. Approximately 150 maximum PSIG. Approximate CFM 292. Driven by a 75HP motor. Serial # OOF0419. 3/60/460 Volt. with SPX Hankinson Air Dryer, Model HES280

Used Spencer Turbine Company 75 HP Vacuum Producer, Catalog# F135x75 SPEC, Serial# 310188.

Used- Spencer Turbine Company 75 HP Vacuum Producer, Catalog# F135x75 SPEC, Serial# 310188.

MFR: Spencer Turbine Co

Used Hoffman centrifugal blower. Model number 38602. Blower is driven by a 75 hp electric motor at 3565 rpm. Blower has a 14" flanged air intake and export ports. Serial number 0484027. Requires 46...

Used-Hoffman centrifugal blower. Model number 38602. Blower is driven by a 75 hp electric motor at 3565 rpm. Blower has a 14" flanged air intake and export ports. Serial number 0484027. Requires 460 vac 3 phase electrical supply.

MFR: Hoffman

Used Vevey 4,000 Liter Rotary Vacuum Dryer – Stainless Steel | 75 Cu. Ft. Capacity

Used- Vevey 4,000 Liter Capacity Rotary Vacuum Dryer, 75 Cubic Feet Working Capacity, Stainless Steel. Approximate 52" diameter x 128" straight side (1380mm diameter x 3250mm straight side). Dished, one end removable. Inside rated for 30 psi (2 bar) and full vacuum (-1) at 392 degrees F (200 degrees C). Cored agitator with paddles rated for 75 psi (5 bar) and full vacuum. Flat channel jacket rated for 75 psi (5 bar) and full vacuum (-1). (2) 12" x 15" (310mm x 385mm) end clean out doors. Mechanical seal. Complete with gearbox, 6,6 kW, 500 volt motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Vevey

Used Vevey 75 Cubic Feet Rotary Vacuum Industrial Dryer – Stainless Steel

Used- Vevey 75 Cubic Feet Working Capacity Rotary Vacuum Industrial Dryer. Stainless steel on product contact parts. Approximate 52" diameter x 128" straight side (1400mm diameter x 3000mm straight side). Dished, one end removable. Inside rated for approximate 72 psi (5 bar) and full vacuum (-1) at 311 degrees F (155 degrees C). Cored agitator shaft with paddles rated for 72 psi (5 bar) and full vacuum. (2) 12" x 15" (310mm x 385mm) end clean out doors. Adjustable packing glands. Complete with gearbox, 15kW motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Vevey

Used Caterpillar 3508 Diesel Generator | 750 kW Industrial Power Generation Unit

Used- Caterpillar Model 3508 Diesel Generator. Open skid unit. Rated 750kW 23Z02373 3508STD 1025 hours 10wire No control panel No breaker 480 Volt 1128 Amp 60 Hertz.

MFR: Caterpillar

Used Cummins 750 kW Diesel Generator – DQFAA, Tier 2, 480V Capable, UL2085 Tank, Passed Load Test

Used-750 kW standby (680 kW prime) Cummins diesel generator set, model DQFAA, SN-H070098040. Cummins QST30-G5 engine rated 1490 HP at 1800 RPM, SN-37229540, EPA Tier 2 emissions. 3/60/120/208V, 12 lead reconnectable to 480V and other voltages. 2500 Amp 100% rated main-line circuit breaker. PMG permanent magnet generator. Oversized 1040 kW rated generator end. Engine cooling radiator rated 50C/122F ambient. UL 2200 listed stationary engine-generator-assembly. PowerCommand 2100 digital control panel. EnerGenius battery charger 10 amp 120/208/240V. Coolant heater 208/240/480V. Aluminum sound attenuated enclosure. 3600 gallon UL2085 sub-base fuel tank, with secondary containment. 792 Hours. Year 2007. Overall dimensions 113W x 341L x 165H, 60,000 lbs. (storage trailer in photo not included) Passed load test 2/11/2025.

MFR: Cummins

Used Circleville Metal Works 750 Gallon 304 Stainless Steel Mix Tank | Anchor Agitator | 5 HP Motor | Dished Top & Bottom

Used- Circleville Metal Works Inc. approximately 750 gallon Mix Tank. 304 stainless steel vertical 60" diameter X 60" high straight side. Internal rated 0.25 PSI @ 212 F. S/N CMW-940. Dished top and bottom. Top fittings: 20" manway, (2) 1.5", (2) 2", (3) 3", and (1) 4". 2" center bottom drain. Equipped with anchor style agitator driven by Philadelphia right-angle drive Model MT04. S/N 508380 rated 1750 RPM input, 84 RPM output. Powered by 5HP 3/60/230-460 volt motor. Mounted on (4) legs giving 27" clearance. Built 1975.

MFR: Circleville Metal

Used 750 Gallon Stainless Steel Vertical Mix Tank – Dual Turbine & Emulsifier (N

Used 750 Gallon Stainless Steel Vertical Mix Tank, Stainless Steel. Approximately 58" diameter x 60" straight side. Dome Top, Dome Bottom. Top center entering emulsifying agitator, no drive. Top offset entering Dual 3 turbine agitator Driven by an approximate 1.17HP 3/60/208-230/460v 1725rpm motor. Openings Top: 22" for agitator, 21" manway (no cover), 3", (4) 2", 2" side bottom outlet. 3" Center bottom outlet with 6" discharge height. Mounted on (4) stainless steel legs.

Used New Brunswick Scientific Co. 3000L (750 gallon) capacity Stainless Steel Tank. National Board #569. Diameter is 48” with a 72” straight side with jacket on the lower 24". Vessel- Max Allowable...

Used-New Brunswick Scientific Co. 3000L (750 gallon) capacity Stainless Steel Tank. National Board #569. Diameter is 48” with a 72” straight side with jacket on the lower 24". Vessel- Max Allowable Working Pressure 40PSIG/O PSIA. Jacket-Max Allowable Working Pressure 35 PSIG. Vessel- Max Temp. 300°F. Jacket- Max Temp. 300°F. Vessel- Hydrotest 80 PSIG. Jacket- Hydrotest 100 PSIG. The top has a 18”RFSO with blind flange with 4” sightglass, a 2” sightglass , one-¼” plug, one-½” plug, one- ¾” plug and one-1” threaded coupling on the neck. The top of the tank has a 1-1/2” agitator shaft (no motor included), ¾” threaded coupling, ¼” threaded coupling, one-1” 150lb. Pad flange, one-4” 150lb. Pad flange, and three lift lags. The upper 24” inch portion of the tank has three-2” threaded couplings, one-3/4” threaded coupling, one-1” threaded coupling with fitting, two-1” sanitary threaded, one-2” 150lb. Pad flange with blind, and one Ametek MNG DIV. Pressure Gauge on a 1”pad flange. The lower 48” jacketed portion has three-2” threaded couplings. Below the jacket is six--1” sanitary threaded. The bottom has one--2” pad flange with blind, one-½” valve with fittings, one-1” valve with fittings, one-2” valve with fittings, and 3 lift lugs.Built 1982. Sits on four carbon steel legs. Overall Size is 132” x 80”.

MFR: New Brunswick Scientific