Adhesive and Sealant Equipment

Used Hyster BE100ZHD Electric Forklift – 10,000 lb Capacity, 12' Forks

Used- Hyster Electric Fork Lift, Model BE100ZHD. 12' forks. Rated up to 10,000 lbs (5 Tons). 24V battery. 9411 hours.

MFR: Hyster

Used Hyster H110FT Forklift – 10,250 lb Capacity Diesel Lift Truck with Side Shift & Fork Positioner (2014)

Used- Hyster Fork Lift, Model H110FT. Rated up to 10,250 lb lift capacity. With Cascade sideshifting fork positioner. 48'' Forks. Operates with Ultra-Low Sulfur diesel fuel. Reported to have 14,300 hours. Serial #S005V03693M, built 2014.

MFR: Hyster

Used Robinson Air Ring Blower – 50 HP, 5840 CFM | High-Performance Industrial Blower for Airflow & Ventilation Applications

Used- Robinson Air Ring Blower. Approximate 5840 CFM, Static pressure of 20 oz. Driven by a 50 HP, 3/240/480 volt, 3500 rpm motor.

MFR: Robinson

Used Industrial Filter & Pump Vertical Leaf Filter – 500 Sq Ft, 304 Stainless Steel

Used- Industrial Filter & Pump Vertical Leaf Filter. Type 122.332, 304 Stainless Steel, Series 60-3.5-19. The filter has (19) 44" x 44" filter leaves with a total surface area of 500 square feet and has a maximum working pressure of 70 PSI at 180 Degrees F.

MFR: Industrial Filter

Used Groen 500-Gallon Cooker/Cooling Kettle – Jacketed, Sweep Agitation, 2 HP Motor

Used- 500 Gallon Groen Cooker/Cooling Kettle with Sweep Agitation and scraper blades. Jacket rated 50 PSI @ 200 Deg.F. Driven by 2 HP motor. Dish Bottom and flat top with hinged lids. Approx. 3" tri-clamp outlet. Last used in sanitary sauce plant.

MFR: Groen

Industrial Groen 500-Gallon Cooker/Cooling Kettle – Food-Grade, Stainless Steel

Used- 500 Gallon Groen Cooker/Cooling Kettle with Sweep Agitation and scraper blades. Jacket rated 50 PSI @ 200 Deg.F. Driven by 2 HP motor. Dish Bottom and flat top with hinged lids. Approx. 3" tri-clamp outlet. Last used in sanitary sauce plant.

MFR: Groen

Groen 500-Gallon Sanitary Processing Kettle – Sweep Agitation & Scraper Blades

Used- 500 Gallon Groen Cooker/Cooling Kettle with Sweep Agitation and scraper blades. Jacket rated 50 PSI @ 200 Deg.F. Driven by 2 HP motor. Dish Bottom and flat top with hinged lids. Approx. 3" tri-clamp outlet. Last used in sanitary sauce plant.

MFR: Groen

Used Walker 500-Gallon Jacketed Stainless Steel Mix Tank | Model PZ-ST | Heated Process Vessel

Used Walker 500-Gallon Jacketed Stainless Steel Mix Tank | Model PZ-ST | Heated Process Vessel. Jacket rated 100psi at 250 degrees F. Top mounted mixer driven by a 1hp 3/60/230/460v 1730rpm motor through reducer 55.17:1 ratio. Height 86" with agitator.

MFR: Walker

Used Chester Jensen X70N50 500 Gallon Jacketed Kettle – Stainless, Scrape Agitation, VSD, Food Grade

Used- Chester Jensen, Model: X70N50 500 Gallon Jacketed Tank (Kettle), Stainless Steel, With Scrape Agitation. Center discharge: 4'' reduced to 2'' tri-clamp (with valve). Top entry scrape agitator, Motor: 5 hp, 230/460 volt, 100 rpm approximately. Stainless steel control panel. Variable speed drive. Additional port for secondary mixer. Previous use: food application. Serial# 9806-P, built 1998. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Chester Jensen

Used – Cutler-Hammer 500/575 KVA Transformer – 3-Phase, 2300 Delta HV / 480Y-277 LV

Used Cutler-Hammer 500/575 KVA Transformer 3-Phase, 2300 Delta HV / 480Y-277 LV BIL 30KV. 3 phase 60 hertz. 177 Gallon fluid capacity. 10psi max at Positive & Negative Terminals. Serial# PAI-1049. 4790 total weight.

MFR: Cutler Hammer

Unused Hanson Tank Air Tank Skid – (2) 500 Gallon Vertical Tanks, ASME Rated

Unused- Hanson Tank Air Tank Skid Consisting of (2) 500 Gallon Vertical Tanks. Each tank rated 300 psig at 400 degrees F MAWP, -20 degrees F at 300 psig MDMT. ASME rated. With skirt and angle clips. Various connections. Serial# 457626, National Board# 220075, Built 2018.

Used 500 Gallon Vertical Air Receiver Tank – 165 PSI ASME – Samuel Pressure Vessel

Used Vertical Air Receiver Tank, carbon-steel ASME-certified pressure vessel manufactured by Samuel Pressure Vessel Group. Approximate 36" diameter x 108" straight side. Dished heads. The nameplate (NB 1050683) indicates MAWP 165 PSI at 400F and MDMT 20F at 165 PSI, with design data HD-176 and SH-187, built in 2023. The vessel features a cylindrical shell with welded elliptical heads, multiple threaded and flanged nozzles for inlet/outlet/process instrumentation, and a lower skirt base with side penetrations. It is externally coated in industrial blue enamel for outdoor service and integrated into a process piping system, likely functioning as a compressed-air or process-gas receiver, buffer tank, or filtration vessel.