Adhesive and Sealant Equipment

Used Marley Double Flow Cooling Tower | 450 Ton Industrial Cooling System (Model MHF7113)

Used- 450 Ton Marley Double Flow Cooling Tower Model MHF7113. 410-746 ton cooling capacity, based on 3gpm/ton at 95 f hot water 85 F cold water 78 F wet bulb configuration. Built 2016. Dimensions 13'-11" long x 25'-10" wide x 22' tall 41,310lbs.

MFR: Marley

Used Mueller 4,150 Gallon Stainless Steel Jacketed Tank | Brewery Fermentation Vessel

Used- Mueller 4,150 gallon Stainless Steel Jacketed Tank.97 7/16" OD x 219". Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom.Serial # 164585-1. Previous use was for brewery fermentation.

MFR: Mueller Corp

Mueller 4,150 Gallon Stainless Steel Fermentation Tank – Jacketed Vessel

Mueller 4,150 Gallon Stainless Steel Fermentation Tank Jacketed Vessel.97 7/16" OD x 219". Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom. Serial # 164585-2.Previous use was for brewery fermentation.

MFR: Mueller Corp

Used Mueller 4,150 Gallon Brewery Fermenter – Stainless Steel Tank

Used Mueller 4,150 Gallon Brewery Fermenter Stainless Steel Tank. 97 7/16" OD x 219".Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom.Serial # 164585-3.Previous use was for brewery fermentation.

MFR: Mueller Corp

Used Double Drum Dryer – (2) 42" x 120" Chrome Rolls, Hydraulic Drive

Used- Double Drum Dryer. (2) Approximate 42" diameter x 120" face chrome plated rolls, each rated 160 psi at -20 to 650 degrees F, serial #s 490K and 491K. National Board #s 425 and 426, built 2006, certified by PFE Rolls. Each roll set up for a hydraulic drive. 15HP Hydraulic power pack. Dual knife scraper, top fume hood, edge guides and panel. Mounted on stainless steel end frames.

Used Double Drum Dryer. (2) Approximate 42" diameter x 120" face chrome plated

Used- Double Drum Dryer. (2) Approximate 42" diameter x 120" face chrome plated rolls. Approximate rating 100 psi at 450 degrees F. National Board# 1782-2, Certified by Beloit / Overton Machine Co, Built 1962. Each roll set up for a hydraulic drive. 15HP Hydraulic power pack. Dual knife scraper, top fume hood, edge guides and panel. Mounted on stainless steel end frames.

Used Single Drum Dryer Roll

Used- Single Drum Dryer Roll Only. Approximate 42" diameter x 120" face chrome plated roll. Rated 160 psi at 450 degrees F., serial# 3487-2, National Board# 1316-2, built, certified by Overton Machine.

Single Drum Dryer Roll Only-Used

Used- Single Drum Dryer Roll Only. Approximate 42" diameter x 120" face chrome plated roll. Rated 160 psi at 450 degrees F., serial# 3487-1, National Board# 1316-1, certified by Overton Machine.

Used R&M Italia 160L Glass Lined Reactor Train with 70L Receiver – 150 PSI – XP Agitator – Tycon Reglass – QVF System

Used- R & M 160 Liter Italia Glass Reactor Train with 160 Liter Glass Lined Reactor. Removable dish top, dish bottom, intermediate QVF glass mid section, rated 150 psi and full vacuum at +356/-112 F internal, jacketed for 150 psi and full vacuum at +356/-112 F, top mounted 1 hp, 230/460 volt, xp agitator drive, mechanical seal, 3 blade retreat curve agitator, tube baffle, 70 liter R & M Italia receiver, glass lined, removable dish top, dish bottom, internediated QVF glass mid section, rated 150 psi and full vacuum at 356 F internal, jacketed for 150 psi and full vacuum at 356 F, reactor and receiver bottom lift/lower mechanisms, reglass tycon reactor bottom serial# 1109, national board# 650, receiver serial# 8037, national board# 423, reactor reglassed by Tycon in 2005.

Used R&M Italia 160L Glass Lined Reactor Train with 70L Receiver – 150 PSI – Jacketed – XP Agitator – QVF Sections

Used- 160 liter R & M Italia 160 liter glass lined reactor, removable dish top, dish bottom, intermediate QVF glass mid section, rated 150 psi and full vacuum at 356 F internal, jacketed for 150 psi and full vacuum at 356 F, top mounted 1 hp, 230/460 volt, xp agitator drive, mechanical seal, 3 blade retreat curve agitator, tube baffle, 70 liter R & M Italia receiver, glass lined, removable dish top, dish bottom, intermediated QVF glass mid section, rated 150 psi and full vacuum at 356 F internal, jacketed for 150 psi and full vacuum at 356 F, , reactor and receiver bottom lift/lower mechanisms, reactor serial# 8047, national board# 425, receiver serial# 8040, national board# 427

Used Thermaline T13 Plate Heat Exchanger – Stainless Steel, 975,672 BTU/Hr

Used- Thermaline Plate Heat Exchanger, Model T13, Stainless Steel. Approximately 42.9 square feet. Flow rate: 44 GPM (Process Side), 145 GPM (Service process). Heat exchanged 975,672 BTU/Hr. Designed temperature 150 psi at 300 degrees F. Gasket material EPDM, CLIP. (33) Plate material 0.6mm, 316 Stainless Steel, CDX. Frame material 304 stainless steel. Serial# 27423-21.

Stainless Steel Thermaline Plate Heat Exchanger, 44/145 GPM – Used T13 Model

Pre-Owned Thermaline Plate Heat Exchanger, Model T13, Stainless Steel. Approximately 42.9 square feet. Flow rate: 44 GPM (Process Side), 145 GPM (Service process). Heat exchanged 975,672 BTU/Hr. Designed temperature 150 psi at 300 degrees F. Gasket material EPDM, CLIP. (33) Plate material 0.6mm, 316 Stainless Steel, CDX. Frame material 304 stainless steel. Serial# 27423-22.