Adhesive and Sealant Equipment

Clear
https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Spray-Dryer/Niro-Mobile-Minor_53228003_aa.jpeg

Stock No.:

53228003

Used GEA Niro Mobile Minor Stainless Steel Laboratory Spray Dryer | Pilot-Scale | 1–7 kg/hr | Mobile Unit

Used GEA Niro Mobile Minor Stainless Steel Laboratory Spray Dryer | Pilot-Scale | 17 kg/hr | Mobile Unit. Approximate evaporation rate of 1-7 kg/hr. (2.2-15.4 Lbs./hr.) depending on product. Niro centrifugal air operated atomizer. Approx. 800 mm (31-1/2") diameter x 915 mm (36") straight side. Chamber is lagged and clad. Electric heater, cyclone, pipework and additional infrastructure. Mounted on mobile frame on wheels. Reported in good condition. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Niro

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Sweco-LS30S_53713031_aa.jpg

Stock No.:

53713031

Sweco LS30S 30 Inch Circular Vibratory Screener - Used Stainless Separator

Used Sweco 30" Diameter Model LS30S Circular Screener, Stainless Steel. Double Deck, 3 separation. Driven by a 1/2 HP, 3/60/230/460 Volt, 1140 rpm motor. Mounted on painted carbon steel base with casters. Serial# 589-74F.

MFR: Sweco

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-0-499-Gal/Trans-Tech_10986028_aa.jpg

Stock No.:

10986028

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer. 41" straight side x 45" diameter tank dimensions, flat bottom. Scrape agitation. Has SPX product pump. With stainless steel electrical control cabinet. Mounted on skid. Built 2018.

MFR: Trans-Tech

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Groen-300-NA-2-TA_11059373_aa.jpg

Stock No.:

11059373

Groen Double Motion Inclined Agitation Jacketed Kettle – 300 Gallon, 3 HP Drives (Used)

Used- Groen Double Motion Inclined Agitation Jacketed Kettle 300 Gallon, 3 HP Drives. Vertical, flat open top with covers, Hemispherical bottom. Scrape agitation with "Tree" style secondary mixer. Jacket rated 90 PSI @ 332 Deg.F. Jacket tested good. 3 HP Drives. National Board# 12612, Serial# 75854-2-2. Built 2012

MFR: Groen

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-0-499-Gallon/53244005_aa.jpg

Stock No.:

53244005

IAF 300 Gallon 316 Stainless Steel Agitated Fermentor / Reactor

Used- IAF Fermentor / Reactor, Approximate 300 Gallons, 316 Stainless Steel. Approximate 40" diameter X 55" Straight Side. Dished top and bottom. Internal rated 50 psi at 250 degrees F. 304 Stainless steel jacket rated 80 psi at 300 degrees F. Bottom center entering dual 4-blade impeller agitator. Driven by a 7.5hp, 3/60/230/460 volt, 1755rpm motor through reducer, 5:1 ratio. Openings top: Approximate 14" manway with cover, 4", (2) 3", (3) 1-1/2", 1", (3) 1/2", (2) 3/4", side: 3" with sight glass, (7) 1-1/2", (2) 1/2", 8" for agitator. 1" Bottom outlet, with 20" discharge height. (4) fixed sidewall baffles. Mounted on (4) legs. Serial# D-651, National Board# 396.

https://images.aaronequipment.com/ItemImages/Blowers/Blowers/HSI-NT88408_53267151_aa.jpg

Stock No.:

53267151

Used HSI NT88408 11-Stage Centrifugal Gas Blower – 300 HP Industrial Multi-Stage Blower Package

Used HSI NT88408 11-Stage Centrifugal Gas Blower 300 HP Industrial Multi-Stage Blower Package. S/N 2131006A-5. 10' inlet, 8" outlet, POS.1 vertical. Blower casing is cast iron with heresite P403L coating. Shaft material is 4140 carbon steel. Has labyrinth seals and brass deflector. Impeller is 5011 CAST B.C. at wheel #1 and 5021 CAST RAD. at wheel #2 thru 11. Unit mounted on 25' X 130" skid with 449TS HSI standard motor base. Powered by 300 HP TECO 3/60/460 volt motor.

MFR: HSI

https://images.aaronequipment.com/ItemImages/Blowers/Blowers/HSI-NT88408_53267160_aa.jpg

Stock No.:

53267160

HSI NT88408 Multi-Stage Centrifugal Blower System for Industrial Air Movement and Process Gas Applications

HSI NT88408 Multi-Stage Centrifugal Blower System for Industrial Air Movement and Process Gas Applications. S/N 2131006A-5. 10' inlet, 8" outlet, POS.1 vertical. Blower casing is cast iron with heresite P403L coating. Shaft material is 4140 carbon steel. Has labyrinth seals and brass deflector. Impeller is 5011 CAST B.C. at wheel #1 and 5021 CAST RAD. at wheel #2 thru 11. Unit mounted on 25' X 130" skid with 449TS HSI standard motor base. Powered by 300 HP TECO 3/60/460 volt motor.

MFR: HSI

https://images.aaronequipment.com/ItemImages/Chillers/Air-Cooled-Chillers/Carrier-30XAB30064_54339001_al.jpg

Stock No.:

54339001

Carrier AquaForce 30XAB300 Air-Cooled Screw Chiller – 300 Ton Industrial Chiller

Used Carrier AquaForce Model 30XAB30064-0FSXM outdoor air-cooled liquid chiller, approximately 300 ton capacity, built 2019. Unit is part of the Carrier 30XA/30XAB AquaForce family and is designed for commercial and industrial chilled water service. Equipped with R-134a refrigerant, semi-hermetic twin rotary screw compressors, multiple independent refrigeration circuits and Carrier ComfortLink controls with Touch Pilot / Navigator interface for diagnostics, demand limiting and chilled-water temperature control. Serial #1916Q94938. Operating data includes 73,696 total machine hours and 15,909 machine starts; Compressor A has 37,766 hours and 22,714 starts; Compressor B has 55,025 hours and 4,243 starts. Possible applications include commercial HVAC, industrial chilled water systems, manufacturing process cooling, data center cooling, healthcare facilities and other applications requiring approximately 300 tons of chilled-water cooling capacity.

MFR: Carrier

https://images.aaronequipment.com/ItemImages/Generators/Diesel-Fuel-and-Natural-Gas-Fuel/Blue-Star-Power-Systems-VdD300-01_54380001_aa.jpg

Stock No.:

54380001

Blue Star VD300-01 300 kW Diesel Generator – 480/277V Standby Power Unit

Used Blue Star Power Systems / Volvo 300 kW Standby (275 kW prime) Diesel Generator Set, Model VD300-1, SN-103448-1-1. Volvo Penta TAD1351GE engine rated 456 HP at 1800 RPM, SN-2013746570, EPA Tier 3 emissions. 3/60/277/480V, 12 lead reconnectable to other voltages. 400 Amp main-line circuit breaker. PMG - permanent magnet generator. UL listed stationary engine generator assembly. Basler DGC - 2020 digital control panel. Coolant heater. Weather enclosure. UL listed sub-base fuel tank with secondary containment. 121.4 Hrs. Yr 2018.

MFR: Blue Star Power Systems

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Air-Cooled/54383003_aa.jpg

Stock No.:

54383003

Kelvion Air Cooled Heat Exchanger SA-249 TP304 Stainless Steel 300 Sq Ft

Used Kelvion, Inc Thermal Solutions, Air Cooled Fin Fan Heat Exchanger, 304 Stainless steel. Approximately 300 sqft area. Construction Details: Tube Material: SA-249 TP304 Stainless Steel, Tube Size: 5/8 in. O.D. 0.065 in. wall, Maximum Allowable Working Pressure: 50 PSIG @ 350F, Minimum Design Metal Temperature: -20F @ 50 PSIG/ Shop Test Pressure: 65 PSIG. 7.5 HP Fan Motor. S/n 2305801, Yr. 2023.

https://images.aaronequipment.com/ItemImages/Electrical-Equipment/Transformers/V48M39T3316_54449001_aa.jpg

Stock No.:

54449001

Used Eaton 300 KVA Dry-Type Distribution Transformer | 480V to 400V 3-Phase Unit

Used- Eaton Dry-Type Distribution Transformer, Model V48M39T3316. 300 KVA. Class AA. 3 phase, 60 Hz, primary voltage 480V, secondary 400V. Built 2024.

https://images.aaronequipment.com/ItemImages/Generators/Diesel-Fuel-and-Natural-Gas-Fuel/Generac-MG0300_54543001_ab.jpg

Stock No.:

54543001

Used Generac MG0300 300 kW Natural Gas Generator – 277/480V Enclosed Genset with

Used 2012 Generac natural gas generator, model MG0300, rated at 300 kW. Unit is powered by an enclosed OH0924 engine and has 160 reported operating hours. Generator is configured for 3-phase, 60 Hz, 277/480V electrical service and includes a weather enclosure, Eaton inline 630 amp breaker, and coolant heater. Serial number 2114542. Possible applications and suitable uses include standby or backup power for industrial facilities, manufacturing plants, warehouses, commercial buildings, and other operations requiring 300 kW, 277/480V 3-phase power. OAD 174" X 57" X 75"T, 8,300 LBS.

MFR: Generac

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.