Adhesive and Sealant Equipment

Used 1000 liter single use bioreactor, Made by Thermo Scientific

Used- 1000 liter single use bioreactor, Made by Thermo Scientific, Stainless Steel. Open top, flat bottom shell. 38" diameter x 50" straight side. Dimple Jacket.Operating Temperature Range: Ambient to 40 +/- 0.1 Degrees C (104+/-0.2 DegreesF). 0.5psi Bag Pressure. Includes AB series A Drive, Brother 3 phase induction motor, 1/2hp 3/60/208-230/460v 1720rpm, 15:1 Ratio. Mounted on Stainless Steel Frame. Serial# H10289-04.

MFR: Thermo Scientific

Unused- Jiangsu 1000 Liter (264 Gallon) Emulsification Mix Tank

Unused- Jiangsu 1000 Liter (264 Gallon) Emulsification Mix Tank. Internal Atmospheric Rated at 122 Deg F. Conical Top and Bottom. 304 Stainless Steel Construction. Center agitator with scraper, off center Emulsifier. Jacketed, rated 29psi @ 122 Deg F. Emulsifier Motor is 7.5 kw, 220V, 3/60.Insulated. Mounted on 4 legs. Never installed.

264 Gallon Jacketed Tank (Reactor)

Used- 264 Gallon Jacketed Tank (Reactor). 316L Stainless Steel, Insulated, Full Vacuum. Two zone jacket rated: 100 psi @ 300 deg.f. Vessel mawp: 50 psi @ 300 deg.f. Rated full vacuum. Insulated. With pressure rated sight glass type manway. Sanitary interior polish. With bottom mount agitator (requires motor). Top inlets: one 4'', two 3'', five 2'', four 1.5", Center discharge: 3''. Dish top and bottom. Top cip spray ball and temperature probe. Tank is on three stainless steel legs with pads, with lifting lugs. Certified by Industries d'Acier, Serial# 310, built 2018. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Wenzhou ACE Machinery 1,000-Liter 316L Sanitary Mixing Tank – Jacketed, Insulated & Load Cell Equipped

Used- Wenzhou ACE Machinery 1,000-liter (264 Gallon) (1 cubic meter) stainless steel sanitary mixing tank with 316L stainless steel product-contact surfaces and 304 stainless steel exterior. The inner tank features a mirror-polished finish, 5 mm wall thickness, and a dimple jacket, with 2 mm outer cladding and PU foam insulation. Vessel is equipped with a 4 kW agitator operating at 36 RPM with Teflon scraper and a control box for mixing speed control. The inner vessel has a design pressure range of -0.1 MPa to 0.2 MPa, while the jacket has a design pressure of 0.35 MPa. Tank features sanitary clamps on each inlet orifice, a 3" bottom valve, load-cell connections, and one spare single-face mechanical seal. Additional equipment includes electrical upgrades, required safety equipment, condenser, controller, Rice Lake load cells, relief valve, and rotary shaft cage protection. Electrical requirements are 480 V, 3-phase, 60 Hz. Possible applications and suitable products include sanitary liquid mixing and processing of liquid products requiring agitation, heating, cooling, vacuum, pressure processing, or weight-based measurement.

Shandong HG Machinery 10,000 Liter Fermentation Tank

Unused - Shandong HG Machinery 10,000 Liter Fermentation Tank, 2641 Gallon (85 BBL), 304 Stainless Steel, Vertical. Approximately 78.74" diameter x 137.79" straight side. Dished top, 60 degree cone bottom. Jacket approximately 14m2, test pressure 0.2MPa (29 PSI). Openings top: 102mm (4"), 89mm (3.5"), 51mm (2"), Side: 540mm x 440mm Manhole (21.25" x 17.3"), 38mm (1.5"), 19mm (.75"). 1-1/2" Side cone outlet, 818mm (32.2") discharge height. 1-1/2" Center bottom outlet, approximate 60mm (2.36") discharge height. Mounted on (4) legs. Approximate 87" x 87" x 236" tall, 3400 lb

Used Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity

Used- Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity. 10 diameter X 44 long straight side; Top Fittings: (2) 30" manways, (1) 1", (1) 2", (2) 3", (3) 4"; Has one bottom end 4" outlet; Dished ends; Ends certified by Trinity Industries; Mounted on saddles; 12-6" shipping height. Previously stored Sulfuric Acid.

High-Capacity Stainless Steel Jacketed Tank – Used. Made by Precision Stainless

High-Capacity Stainless Steel Jacketed Tank Used. Made by Precision Stainless. 103 Liter / 27.2 Gallon Capacity, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 5644-6, National Board# 3890. Used as Freeze / Thaw Vessel.

Precision Stainless Freeze/Thaw Vessel – 103 Liter, Used.

Precision Stainless Freeze/Thaw Vessel 103 Liter, Used. 103 Liter / 27.2 Gallon Capacity, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 201512-20, National Board# 8937. Used as Freeze / Thaw Vessel.

Used Precision Stainless 20” Diameter Jacketed Stainless Steel Tank

Used Precision Stainless 20" Diameter Jacketed Stainless Steel Tank. 103 Liter / 27.2 Gallon Capacity, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 7696-1, National Board# 1731. Used as Freeze / Thaw Vessel.

Used Industrial Precision Stainless Tank, Board Rated.

Used Industrial Precision Stainless Tank, Board Rated. 103 Liter / 27.2 Gallon Capacity, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 200254-27, National Board# 8628. Used as Freeze / Thaw Vessel.

Used Jacketed Stainless Steel Tank on Casters. Made by Precision Stainless.

Used Jacketed Stainless Steel Tank on Casters. Made by Precision Stainless. 103 Liter / 27.2 Gallon Capacity, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 7328-18, National Board# 1531. Used as Freeze / Thaw Vessel.

Used 27.2 Gallon Vertical 316L Stainless Steel Tank – Precision Stainless Built

Used 27.2 Gallon Vertical 316L Stainless Steel Tank Precision Stainless Built. 103 Liter / 27.2 Gallon Capacity. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 990706-4, National Board# 8184. Used as Freeze / Thaw Vessel.